Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Roller</strong> <strong>conveyor</strong> <strong>curve</strong>, driven, series 9rfk034a<br />
Framework: Version: Steel, painted or stainless steel, bead-blasted<br />
Low side wall: L-profile 92 x 54 x 3 mm<br />
High side wall: L-profile 135 x 54 x 3 mm<br />
Nominal width: 280, 380, 480, 580, 680, 780 mm<br />
Curve angle: 30°, 45°, 60°, 90°<br />
further angles optionally available<br />
Inner radius: 502 mm<br />
Drive: By 3/8” chain (06B-1) from roller to roller, fixed drive<br />
Flange gear motor 0.25 kW; DS 230/400 V, 50 Hz, IP54<br />
(connection in motor junction box)<br />
Speed: v = 0.1 - 0.5 m/sec constant at 50 Hz<br />
optional control by frequency converter<br />
Lateral guide: Fixed, with raised roller <strong>conveyor</strong> side<br />
for further variants, see Accessories<br />
Supports: Flat bracket with pusher, see Accessories<br />
<strong>Roller</strong>s: Conical roller housings of Polyamide 6<br />
Conical roller housings of Vestamid (optional)<br />
Sprocket insert: Steel double sprocket, z = 15, with grooved ball bearing<br />
Bearing inserts: Plastic roller base with one ball race<br />
Axles: ø 10 mm, IGM6<br />
Load capacity per drive: max. 500 N at 0.2 m/s<br />
Subject to technical amendment
Change language