You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
������� �<br />
®<br />
�������������������<br />
������������������<br />
Technische Änderungen vorbehalten<br />
Industriestraße 1 Telefon +49(0)2863 -2005-0 www.trapo.de<br />
48712 Gescher-Hochmoor Telefax +49(0)2863 -4264 info@trapo.de
<strong>Roller</strong> <strong>conveyor</strong> <strong>curve</strong>, gravity, series 9rfk024s<br />
Framework: Version: Steel, painted or stainless steel, bead-blasted<br />
Low side wall: L-profile 73 x 30 x 3 mm<br />
High side wall: L-profile 100 x 30 x 3 mm<br />
Nominal width: 100, 150, 200, 250, 300, 350, 400, 450, 500 mm<br />
Curve angle: 30°, 45°, 60°, 90°<br />
further angles optionally available<br />
Inner radius: 359 mm<br />
Lateral guide: Fixed, with raised roller <strong>conveyor</strong> side<br />
Supports: Flat bracket with pusher, see Accessories<br />
<strong>Roller</strong>s: Conical roller housings of Polyamide 6<br />
optional Conical roller housings of Vestamid<br />
Bearing inserts: Plastic roller base with one ball race<br />
Axles: ø 6 mm, FA6<br />
Load capacity per drive: max. 300 N<br />
Subject to technical amendment
<strong>Roller</strong> <strong>conveyor</strong> <strong>curve</strong>, gravity, series 9rfk024s<br />
NW<br />
NW<br />
Side wall „low“ Side wall „high“<br />
<strong>Roller</strong> Radii Pitch<br />
NW Number<br />
Subject to technical amendment
<strong>Roller</strong> <strong>conveyor</strong> <strong>curve</strong>, gravity, series 9rfk034s<br />
Framework: Version: Steel, painted or stainless steel, bead-blasted<br />
Low side wall: L-profile 92 x 54 x 3 mm<br />
High side wall: L-profile 135 x 54 x 3 mm<br />
Nominal width: 280, 380, 480, 580, 680, 780 mm<br />
Curve angle: 30°, 45°, 60°, 90°<br />
further angles optionally available<br />
Inner radius: 502 mm<br />
Lateral guide: Fixed, with raised roller <strong>conveyor</strong> side<br />
for further variants, see Accessories<br />
Supports: Flat bracket with pusher, see Accessories<br />
<strong>Roller</strong>s: Conical roller housings of Polyamide 6<br />
optional Conical roller housings of Vestamid<br />
Bearing inserts: Plastic roller base with one ball race<br />
Axles: ø 10 mm, IGM6<br />
Load capacity per drive: max. 500 N<br />
Subject to technical amendment
<strong>Roller</strong> <strong>conveyor</strong> <strong>curve</strong>, gravity, series 9rfk034s<br />
NW NW<br />
Side wall „low“<br />
NW<br />
Side wall „high“<br />
<strong>Roller</strong> Radii Pitch<br />
Number<br />
Subject to technical amendment
<strong>Roller</strong> <strong>conveyor</strong> <strong>curve</strong>, gravity, series 9rfk054s<br />
Framework: Version: Steel, painted or stainless steel, bead-blasted<br />
Low side wall: L-profile 110 x 54 x 3 mm<br />
High side wall: L-profile 155 x 54 x 3 mm<br />
Nominal width: 280, 380, 480, 580, 680, 780 mm<br />
Curve angle: 30°, 45°, 60°, 90°<br />
further angles optionally available<br />
Inner radius: 797 mm<br />
Lateral guide: Fixed, with raised roller <strong>conveyor</strong> side<br />
for further variants, see Accessories<br />
Supports: Flat bracket with pusher, see Accessories<br />
<strong>Roller</strong>s: Conical roller housings of Polyamide 6<br />
optional Conical roller housings of Polypropylene<br />
Bearing inserts: Bearing base with grooved ball bearings<br />
Axles: ø 12 mm, IGM8<br />
Load capacity per drive: max. 1000 N<br />
Subject to technical amendment
<strong>Roller</strong> <strong>conveyor</strong> <strong>curve</strong>, gravity, series 9rfk054s<br />
NW NW<br />
Side wall „low“ Side wall „high“<br />
<strong>Roller</strong><br />
Radii<br />
Pitch<br />
Small pitch<br />
NW Number Number<br />
Subject to technical amendment
<strong>Roller</strong> <strong>conveyor</strong> <strong>curve</strong>, driven, series 9rfk024a<br />
Framework: Version: Steel, painted or stainless steel, bead-blasted<br />
Low side wall: L-profile 73 x 30 x 3 mm<br />
High side wall: L-profile 100 x 30 x 3 mm<br />
Nominal width: 100, 150, 200, 250, 300, 350, 400, 450, 500 mm<br />
Curve angle: 30°, 45°, 60°, 90°<br />
further angles optionally available<br />
Inner radius: 359 mm<br />
Drive: By 6 mm chain (04B-1) from roller to roller, fixed drive<br />
Flange gear motor 0.18 kW; DS 230/400 V, 50 Hz, IP54<br />
(connection in motor junction box)<br />
Speed: v = 0.1 - 0.5 m/sec constant at 50 Hz<br />
optional control by frequency converter<br />
Lateral guide: Fixed, with raised roller <strong>conveyor</strong> side<br />
Supports: Flat bracket with pusher, see Accessories<br />
<strong>Roller</strong>s: Conical roller housings of Polyamide 6<br />
Conical roller housings of Vestamid (optional)<br />
Sprocket insert: Steel double sprocket, galvanised, z = 17, with grooved ball bearing<br />
Bearing inserts: Plastic roller base with one ball race<br />
Axles: ø 6 mm, FA6<br />
Load capacity per drive: max. 300 N at 0.2 m/s<br />
Subject to technical amendment
<strong>Roller</strong> <strong>conveyor</strong> <strong>curve</strong>, driven, series 9rfk024a<br />
NW<br />
Rm (roller)<br />
NW NW<br />
Side wall „low“ Side wall „high“<br />
<strong>Roller</strong> Radii<br />
Number<br />
optional:<br />
Lateral drive<br />
Subject to technical amendment
<strong>Roller</strong> <strong>conveyor</strong> <strong>curve</strong>, driven, series 9rfk034a<br />
Framework: Version: Steel, painted or stainless steel, bead-blasted<br />
Low side wall: L-profile 92 x 54 x 3 mm<br />
High side wall: L-profile 135 x 54 x 3 mm<br />
Nominal width: 280, 380, 480, 580, 680, 780 mm<br />
Curve angle: 30°, 45°, 60°, 90°<br />
further angles optionally available<br />
Inner radius: 502 mm<br />
Drive: By 3/8” chain (06B-1) from roller to roller, fixed drive<br />
Flange gear motor 0.25 kW; DS 230/400 V, 50 Hz, IP54<br />
(connection in motor junction box)<br />
Speed: v = 0.1 - 0.5 m/sec constant at 50 Hz<br />
optional control by frequency converter<br />
Lateral guide: Fixed, with raised roller <strong>conveyor</strong> side<br />
for further variants, see Accessories<br />
Supports: Flat bracket with pusher, see Accessories<br />
<strong>Roller</strong>s: Conical roller housings of Polyamide 6<br />
Conical roller housings of Vestamid (optional)<br />
Sprocket insert: Steel double sprocket, z = 15, with grooved ball bearing<br />
Bearing inserts: Plastic roller base with one ball race<br />
Axles: ø 10 mm, IGM6<br />
Load capacity per drive: max. 500 N at 0.2 m/s<br />
Subject to technical amendment
<strong>Roller</strong> <strong>conveyor</strong> <strong>curve</strong>, driven, series 9rfk034a<br />
NW<br />
Side wall „low“ Side wall „high“<br />
<strong>Roller</strong><br />
NW Number<br />
NW<br />
Radii<br />
optional:<br />
Lateral drive<br />
Subject to technical amendment
<strong>Roller</strong> <strong>conveyor</strong> <strong>curve</strong>, driven, series 9rfk054a<br />
Framework: Version: Steel, painted or stainless steel, bead-blasted<br />
Low side wall: L-profile 110 x 54 x 3 mm<br />
High side wall: L-profile 155 x 54 x 3 mm<br />
Nominal width: 280, 380, 480, 580, 680, 780 mm<br />
Curve angle: 30°, 45°, 60°, 90°<br />
further angles optionally available<br />
Inner radius: approx. 790 mm<br />
Drive: By 1/2” chain (08B-1) from roller to roller, fixed drive<br />
Flange gear motor 0.37 kW; DS 230/400 V, 50 Hz, IP54<br />
(connection in motor junction box)<br />
Speed: v = 0.1 - 0.8 m/sec constant at 50 Hz<br />
optional control by frequency converter<br />
Lateral guide: Fixed, with raised roller <strong>conveyor</strong> side<br />
for further variants, see Accessories<br />
Supports: Flat bracket with pusher, see Accessories<br />
<strong>Roller</strong>s: Conical roller housings of Polyamide 6<br />
optional Conical roller housings of Polypropylene<br />
Sprocket insert: Steel double sprocket, z = 14, with grooved ball bearing<br />
Bearing inserts: Bearing base with grooved ball bearings<br />
Axles: ø 12 mm, IGM8<br />
Load capacity per drive: max. 1000 N at 0.2 m/s<br />
Subject to technical amendment
<strong>Roller</strong> <strong>conveyor</strong> <strong>curve</strong>, driven, series 9rfk054a<br />
NW NW<br />
Side wall „low“ Side wall „high“<br />
<strong>Roller</strong> Radii<br />
NW Number<br />
optional:<br />
Lateral drive<br />
Subject to technical amendment