computerized unit for recovery, recycling, vacuum, charge - Wigam

ITALIANENGLISH3. Control panelThe upper panel of the unit contains all control elements needed for operation, checking for tightnessand measuring the A/C system operating pressures.fig.13.1 DESCRIPTION OF THE CONTROL KEYSo Ref. 98: when pressed, they enhance the function to perform or to modify. From the left, you will find thefollowing functions: RECOVERY/RECYCLING, VACUUM, OIL CHARGE, UV CHARGE,REFRIGERANT CHARGE, FLUSHUNG, FIRE&GO, AUTOo The numeric keys ref. 47 allow to modify the values of the functions to performo The UP / DOWN key ref. 59 allows to modify the values of the functions to performo The ENTER key ref. 76 must be used to confirm the modified valueso The MENU key ref. 77 is used to see the pages of the unit’s inside values on the display (ref. 30):• PRINT PLATE: by typing the car’s number plate on the numeric keys (ref. 47), thenumber plate will be printed on the report at the end of the functions• LANGUAGE: it is possible to modify the unit’s language, by typing the correspondingnumber appearing on the display• DATABASE UPDATE: allows to update data• DATE AND HOUR: allows to modify the date and hour mentioned on the printed report• SCALES CALIBRATION: must be used each time the operator wants to re-calibrate oneof the four scales• SERVICE: constants that are inside the unit and are protected by PASSWORD1. PASSWORD 2006 allows to modify the print heading of the report2. PASSWORD 5011 allows to reset the counters concerning maintenance3. PASSWORD 9376 allows to reset simultaneously the 4 scalesooSTART/STOP key, ref. 79: used to start or stop the unit’s functionsRef. MC: space used for the introduction of the MEMORY CARD16