89cm/98cm Ku-BAND Rx/Tx ANTENNA SYSTEM - General Dynamics

More documents

Recommendations

Info

General Dynamics SATCOM Technologies4096-62989cm/98cm Ku-BAND Rx/Tx[ 3]Az/ElPositionerSTEP 2.Attach Interface Plates (items 3) to theaz/el positioner using the 3/8”hardware provided (items 6,7,8,9) asshown. Tighten completely.[ 6,7,8,9 ]Typ 4 PlacesMast PipeHole forFeed RodSTEP 3.Stand the reflector on its bottom edgeand insert two 5/16”x 2.50” carriagebolts (item 4) thru the top two holes asshown.[ 4 ]Hole forFeed RodHole forFeed Support9
General Dynamics SATCOM Technologies4096-62989cm/98cm Ku-BAND Rx/TxSTEP 4.A) With the top two bolts in place, liftthe reflector to the reflector supportso that the top two bolts pass thruthe two holes in the upper crossarm.Secure the two bolts with 5/16”hardware (items 10,11,12).B) Insert two 5/16”x 3.50” carriage bolts(item 5) thru the bottom two holesand secure with (items 10,11,12).Tighten securely but do not overtighten as this may damage thereflector.[ 4 ][ 5 ][ 10,11,12]Hole for Feed Support[ 10,11,12 ]10
Page 1 and 2: 4096-629May 6, 2009ASSEMBLY MANUALR
Page 3 and 4: General Dynamics SATCOM Technologie
Page 9: General Dynamics SATCOM Technologie
Page 17: General Dynamics SATCOM Technologie

89cm/98cm Ku-BAND Rx/Tx ANTENNA SYSTEM - General Dynamics

Create successful ePaper yourself

Delete template?

Save as template?