Governor with solenoid valve VAD / Air/gas ratio control ... - valVario

SelectionVAD: Governor with solenoid valve / VAG: Air/gas ratio control with solenoid valve– 15 20 25 32 40 50 /–* /15 /20 /25 /32 /40 /50 R /N K Q W -25 -50 -100 A B K EVAD 1 VAD 2 VAD 3 VAG 1 VAG 2 VAG 3 Inlet flange nominal size– = no inlet flangeOutlet flange nominal size/– = no outlet flange*Specification may be omitted if outlet = inletRp internal thread = RQuick opening, quick closing = /NMains voltage: 24 V DC = K120 V AC; 50/60 Hz = Q230 V AC; 50/60 Hz = WMax. outlet pressure p G max. for VAD: 2.5 to 25 mbar = -255.0 to 50 mbar = -5010 to 100 mbar = -100Standard valve seat = AReduced valve seat = BConnection kit VAG for air control pressure p L : 1 plastic hose coupling, 2 screw plugs = K1 compression fitting, 2 test points p G and p L = EAccessories attached at the right-hand side: 2 screw plugs2 test points p e and p GGas pressure switch DG..C (see table) at the inletGas pressure switch DG..C (see table) at the outletBypass valve VAS 1Accessories attached at the left-hand side: 2 screw plugs2 test points p e and p GGas pressure switch DG..C (see table) at the inletGas pressure switch DG..C (see table) at the outletBypass valve VAS 1* Bei einer Bestellung muss angeben werden, an welchen Ausgangsflansch der Druckregler angebaut wird. GB GB GB GBOrder exampleVAD, VAG · Edition 3.04VAG 125R/NWAK, 2 screw plugs attached at the right-hand side2 test points attached at the left-hand side = standard = available16