Download brochure - Euromat

Desiccant Dryer Features and BenefitsAMicroprocessor ControllerControls valve switching to correctly direct air flow andoperation of blowers and heaters. Protects the dryer viacontinuously monitoring operating parameters.BABEnvironmental ProtectionIP54 rating provides protection against dust and moisturecontamination (IP65 option for wash down applications).GNMCDEMotor Protection/Soft Starter (heated blower only)Reduces inrush current and stress on the mechanical system.Power SupplyDryers operate at 50 Hz (all models) or 60 Hz (optional).Pneumatic options also available on heatless models.Centrifugal Blower (heated blower only)High performance centrifugal blower enables the use ofambient air for regeneration, eliminating compressed air loss.FCDEFHigh Performance Heater (heated blower only)Heats the air used for regeneration to increase the efficiencyof moisture removal.GDesiccantReliable high strength non-acidic desiccant provides maximumperformance and is easily stored and handled.LIHISilencing MufflerReduce the exhausted air noise level to ensure aworker-friendly environment.High Performance ValvesHigh performance butterfly valves with self-energised sealingprovide quick response and long life. The valves are centrallyangled for easy access.HJKJHeavy Duty FiltersPre-filter: High efficiency removing oil aerosol content downto .01 mg/m 3 @ 21°C protecting and extending the life ofthe desiccant.After-filter: Heavy duty removing particles down to 1 microninsuring high air quality downstream to the customer.KLSafety Relief ValveProtects the dryer from over pressurisation incase of fire.Desiccant TowersThe towers are rated for continuous 10 bar g operation.The digital controller turns the towers off and on forregeneration regulation.MNHumidity SensorThe sensor is part of the EMS package that allowscontinuous monitoring of the dew point.Cool Sweep Mode (heated blower only)Reduces temperature and humidity spikes that mayoccur during switching.6 Desiccant Dryers