MINIATURE RIBBONS - Cinch Connectors

.085 in. (2.16mm)DensityMiniature RibbonVertical-Mount Compliant PinAll-Plastic and Metal ShellVertical-mount Miniature Ribbon connectors provide I/O directly from printed circuit boards, where the mating face ofthe connector is in a plane parallel to that of the board.Compliant-pin connectors terminate without solder to plated-through holes in printed circuit boards. The tail conformsto the hole, providing a gas-tight termination without damaging the plating in the printed circuit board.The seating cover acts as an insertion tool fixture, and must be left in place until the connector is installed on thePCB. It may also be left on after insertion to serve as a dust cover to protect the connector from contamination.See pages 6-51 through 6-53 for accessories such as bent bail latches and mounting screws that make the use ofCinch Miniature Ribbon connectors even more cost-effective in board-mount applications.DimensionsA B CSize in mm in mm in mm14 1.745 44.32 1.417 35.99 .625 15.8824 2.170 55.12 1.842 46.79 1.050 26.6736 2.680 68.07 2.352 59.74 1.560 39.6250 3.275 83.19 2.947 74.85 2.155 54.7464 3.875 98.43 3.542 89.97 2.750 69.85PlugSocket with Bail LatchesSocket with InstaLatchesRecommended PCB Hole LayoutInsertion Fixture Backer Plate"C"6-43 Call Toll Free: 1 (800) 323-9612