MINIATURE RIBBONS - Cinch Connectors

.085 in. (2.16mm)DensityMiniature RibbonApplication ToolsTermination Repair PliersThese plier type tools allow you to rework misterminated cable assemblies and/or performspecialized termination operations. They terminate wires individually into Cinch IDCcontacts. Repair Pliers for Standard Termination: Part No. SRT-345Repair Pliers for Half-Tap (Daisy-Chaining) allows you to terminate one wire to multiplecontacts to short contacts together, or even to two separate connectors to make back/back connections, etc. Part No. HT-560InstaLatch Unlatching ToolWhile InstaLatches may be unlocked with something as simple as a center punchor ballpoint pen, this tool provides a “hooked” end that allows you to unlockInstaLatches even in tight areas. Part No. UT-304Crimping Tools for Overmold Kit FerrulesTwo model tools are available to crimp ferrules onto overmold kits:• Pneumatically powered bench-top press, which is portable so itcan be placed in storage when not required. Part No. FCT-551• Hand-operated crimping tool, satisfactory for lower-volume applications.Part No. FCT-552Both tools use the same crimp dies. Select the crimp die(s) below for the particularferrule being used (ferrules shown on page 6-22).6Crimp DiePart No.CD08CD09CD10Crimp FerrulePart No.CF57CF60CF64Call Toll Free: 1 (800) 323-96126-56