MINIATURE RIBBONS - Cinch Connectors

.085 in. (2.16mm)DensityMiniature RibbonAccessoriesWire Restraints for Panel-Mount SUPERIBBON All-Plastic ConnectorsWire restraints provide added security to terminated wires, preventing radialpullout. They are intended for use on panel mounted connectors where hoodsare not required (wire restraints cannot be applied simultaneously with hoods),and snap on after connector termination.Material: Gray UL94V-0 rated polyester.Ordering Information, SUPERIBBON Wire Restraints(Two restraints required per connector)Size Plug Socket14 97-WR-P14 97-WR-S1424 97-WR-P24 97-WR-S2436 97-WR-P36 97-WR-S3650 97-WR-P50 97-WR-S5064 97-WR-P64 97-WR-S64Wire Restraints for Panel-Mount Miniature Ribbon Metal Shell ConnectorsMetal Shell Wire Restraints serve the same purpose as their SUPERIBBONcounterparts, but are for IDC terminated metal shell connectors. These onepiecerestraints snap in place around the termination area after assembly.Material: Blue UL94V-0 rated polyester.6Ordering Information, Miniature Ribbon Wire Restraints(One restraint required per connector)Size Plug or Socket36 77-WR-3650 77-WR-50Panel Mounting Clips for All-Plastic Miniature Ribbon ConnectorsThese clips slip into each end of a modified panel cutout, and allow all-plasticMiniature Ribbon connectors to be snapped into place and securely frontmountedto the panel with no additional hardware. Threaded holes are notrequired in the panel, and connectors can be loaded without needing accessto the rear of the panel.Material: SteelFinish: Tin-cadmium/clear chromateOrdering Information, Panel Mounting Clips(Two clips required per connector)DimensionsChassis Panel ClipBKThickness Part Number Size in mm in mm.062" (1.57mm) 97-MC-062 14 1.417 35.99 1.060 26.92.093" (2.36mm) 97-MC-093 24 1.842 46.79 1.485 37.72.125" (3.18mm) 97-MC-125 36 2.352 59.74 1.995 50.6750 2.947 74.85 2.590 65.7964 3.542 89.97 3.185 80.90BKCall Toll Free: 1 (800) 323-96126-52