AudiaEXPI-D AudiaEXPO-D

More documents

Recommendations

Info

$F:\ENG_DOCS\Datasheets Corel Originals\Pt-hp-s2 Rev D.cdr$

ENCODER/DISPLAY MENUSAt power-up, the display will flash three product ID screens, ending on a customizable Title screen. Pressing the encoder while on the Titlescreen will reveal the Main Menu. Rotate encoder to cycle through available selections. Press encoder to make selections or enter data.MAIN MENU: COBRANET PARAMTRS - AES3 PARAMTRS - WORD CLK OUTPUT (EXPI-D only) - LOGIC PRESETS -PASSWORD PROTECT - TITLE DISPLAY - HARDWARE STATUS - ABOUTCOBRANET PARAMTRS: Establishes CobraNet parameters for CURRENT operation and for LOGIC 1~8 (presets).BUNDLE NUMBER - COBRANET LATENCY - COBRANET SAMPL RT• BUNDLE NUMBER: Assigns CobraNet bundle number for current operation or selected logic preset. Bundle numbers mustmatch those of the corresponding blocks within the AUDIA system design (or other CobraNet devices being used).('unicast' bundle numbers = 256 ~ 61,439; 'multicast' bundle numbers = 1 ~ 255)• COBRANET LATENCY: Selects appropriate CobraNet latency for current operation or selected logic preset. CobraNet latencymust match that of the corresponding AUDIA system (or other CobraNet devices being used).(5.33mS default; 1.33mS; 2.66mS)• COBRANET SAMPL RT: Selects desired CobraNet sample rate for current operation or selected logic preset. CobraNet samplerate must match that of the corresponding AUDIA system (or other CobraNet devices being used).(48kHz default; 96kHz)AES3 PARAMTRS: Establishes digital audio parameters for CURRENT operation and for LOGIC 1~8 (presets).MUTE - SOURCE - FORMAT - EMPHASIS - SAMPLE RT - SIGNAL - COPYGRD• MUTE: Assigns muting of digital audio pairs (1-2; 3-4; 5-6; 7-8) for current operation or selected logic preset.('N' = un-muted default; 'Y' = muted)• SOURCE: Selects source of digital audio input pairs (1-2; 3-4; 5-6; 7-8) for current operation or selected logic preset.('A' = AES3 default; 'S' = SPDIF; 'T' = TOSLINK) (EXPI-D only)• FORMAT: Selects / displays format of digital audio pairs (1-2; 3-4; 5-6; 7-8) for current operation or selected logic preset. EXPI-D detects format of the digital audio input sources. EXPO-D settings must be compatible with receiving devices.('P' = Professional default; 'C' = Consumer) (EXPO-D selection; EXPI-D display only)• EMPHASIS: Selects / displays emphasis of digital audio pairs (1-2; 3-4; 5-6; 7-8) for current operation or selected logic preset.EXPI-D detects emphasis of the digital audio input sources. EXPO-D settings must be compatible with source signals.('N' = Off default; 'Y' = On; '?' = EXPI-D input source emphasis unknown) (EXPO-D selection; EXPI-D display only)• SAMPLE RT: Displays sample rate of digital audio pairs (1-2; 3-4; 5-6; 7-8) for current operation. EXPI-D detects sample rate ofthe digital audio input sources. EXPO-D simply displays the selected CobraNet sample rate.(32kHz; 44kHz; 48kHz; 82kHz; 96kHz; '?' = EXPI-D input source sample rate unknown) (display only)• SIGNAL: Displays presence of carrier signal at digital audio input pairs (1-2; 3-4; 5-6; 7-8) for current operation.('Y' = carrier present; 'N' = carrier not detected) (EXPI-D display only)• COPYGRD: Selects / displays copy guard of digital audio pairs (1-2; 3-4; 5-6; 7-8) for current operation or selected logic preset.EXPI-D detects copy guard of the digital audio input sources. EXPO-D settings must be compatible with source signals.NOTE: It is illegal to make unauthorized copies of copy guarded material.('N' = Off default; 'Y' = On; '?' = EXPI-D input source copy guard unknown; 'x' = not available for Professional format)4
ENCODER/DISPLAY MENUSWORD CLK OUTPUT (EXPI-D only): Selects word clock source for CURRENT operation and for LOGIC 1~8 (presets).('CBRNET' default; 'INP 12'; 'INP 34'; 'INP 56'; 'INP 78')LOGIC PRESETS: Recalls LOGIC 1~8 presets into current settings or saves current settings into LOGIC 1~8 presets.RECALL - SAVE TOPASSWORD PROTECT: Sets and clears password protection. Locks and un-locks access to settings via established password.LOCK (SET PWRD) - UNLOCK (ENT PWRD) - CLEARTITLE DISPLAY: Establishes a customized Title screen to be displayed at power-up and after exiting setup menus.('TITLE 1' = top line / 8 characters; 'TITLE 2' = bottom line / 8 characters)HARDWARE STATUS: Displays operational status of various hardware parameters.3.3V PWR - COBRANET - TEMPRATR - FAN - CLK OUTP -AUDIO 12 - AUDIO 34 - AUDIO 56 - AUDIO 78ABOUT: Displays serial number and various version related information.SERIAL # - FWARE V. - BOOT V. - CM1 V. (CobraNet) - MAC (CobraNet module ethernet address)5
Page 2 and 3: lankprint updateSeptember 7, 2005
Page 5: an affiliate of Rauland-Borg Corp.M
Page 9 and 10: 27V50/60 Hz12 wattsclass 2 wiringan
Page 11 and 12: BLOCK DIAGRAMSEXPI-D Functional Blo
Page 13: Declaration of ConformityBiamp Syst

AudiaEXPI-D AudiaEXPO-D

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?