WLS912 Glass Break Detector - Cerber.pro

SPECIFICATIONSElectricalOperating frequency ..................Power requirement ....................Microphone type ......................900MHz3 AA alkaline batteries (supplied)Omnidirectional electretFLEXIBLE INSTALLATIONThe WLS912 glass break detector may be mounted on the oppositewall, adjacent wall, or on the ceiling over the protected windows.Opposite Wall Mounting Adjacent Wall Mounting Ceiling MountingSupervisionSupervised by controller for ............tamper, low battery, device faultDDMechanicalDimensions (L x W x H) ............5.31 x 2.31 x 1.31in(13.5 x 5.8 x 3.3cm)OperationMaximum 'D'Detection RangeGlass Type Sizes Level 1 † Level 2 †Plate/Tempered1 ⁄ 4" - 1 ⁄ 8" thick 18" x 18" and up 25' 15'(3 - 6mm) (46 x 46cm) (7.6m) (4.6m)12" x 12" to 18" x18" 15' 10'(30 x 30 to 46 x 46cm) (4.6m) (3m)Wired/Laminated1 ⁄ 4" thick 18" x 18" and up 20'(6mm) (46 x 46cm) (6m)† Jumper selectable12" x 12" to 18" x18" 10'(30 x 30 to 46 x 46cm) (3m)DONOTUSEWindows Windows WindowsAFT-100 GLASS BREAK SIMULATORD D D DThe AFT-100 Glass Break Simulator is aportable, battery-operated tester that ensuresreliable locating and testing of the WLS912glass break detector.• generates plate or tempered glasssound samples• 3" full range speaker accuratelyreproduces the full range of frequenciesgenerated by shattering glass• single or automatic/continuous sound(sound every 10sec.) operationEnvironmentalOperating temperature ..............Humidity ....................................32 to 120°F (0 to 50°C)5 to 95%RHnon-condensingNorth American # 29003884©1999 Printed in Canada 02/99Digital Security Controls1645 Flint Road, Downsview, Ontario M3J 2J6www.dscgrp.comInternational # 29003885