Clay Heave Protection - Jablite

More documents

Recommendations

Info

Raised thresholds to doorways or bunds should be provided where storage on upper floors is unavoidable(particularly to the edges of floors without upstands and around staircases).The bund walls should be of fire-resisting and liquid-tight construction.The capacity of the bund area should be at least 3% of the maximum volume of EPS stored.Stockpiles should be sited in such a manner that permanently marked access ways can be maintained.Stockpiles should not impair the performance of any sprinkler system.In warehouses or where large quantities of EPS are stored consideration should be given to the use ofsprinklered premises.On building sites EPS should be stored wherever possible in a fenced compound or building which can besecured, under cover protected from high winds and raised above damp surfaces. Protect from direct sunlight.Stack boards flat without bearers.Storage temperature: Ambient.8 EXPOSURE CONTROLS / PERSONAL PROTECTIONNo specific protection is required when handling EPSOccupational Exposure StandardsThe following are the Maximum Exposure Limits (MEL) for the expansion agent and for the hazardousdecomposition products:Component Name Limit type Value Unit Other Info.Expansion agentPentane TWA 8hr 1770 mg/m³ UK SolventsPentane STEL 15min 2210 mg/m³ UK SolventsDecomposition productsStyrene Monomer TWA 8hr 430 mg/m³ EH40Styrene Monomer STEL 15min 1080 mg/m³ EH40Hydrogen Bromide STEL 15min 10 mg/m³ EH40(Euroclass E )TWA = Time Weighted Average - STEL = Short Term Exposure Limit9 PHYSICAL AND CHEMICAL PROPERTIESPhysical StateCellular FoamFormMoulded shapes or sheetsColourWhite, pink (Claymaster), grey (Premium)DensityRanges from 10kg/m³ to 60kg/m³Solubility in waterNot solubleSolubility in other solvents Soluble in aromatic, halogenated solvents and ketonesSoftening Point95-100°CIgnition temperature in air 350°CFloors | Walls | Roofs Jablite Claymaster Technical Information 16
10 STABILITY / REACTIVITYStabilityConditions to avoidHazardous DecompositionProductsStable under normal use conditions.Decomposes above 200°CHeat flames and sparks. Strong sunlight for prolonged periods.Styrene Monomer, Hydrogen Bromide products (Euroclass E) &Carbon Monoxide when burned11 TOXICOLOGICAL INFORMATIONExpanded polystyrene is non-toxic and is not irritating to the skin or eyes.12 ECOLOGICAL INFORMATIONAll products are not biodegradable and non-toxic.Euroclass E products contain a substance which is classified as dangerous for the environment. However recentstudies on aquatic organisms have shown that articles such as PS foams, while containing this substance, do notneed to be classified for environmental hazard.All products have zero Ozone Depleting Potential (ODP) and virtually zero Global Warming Potential (GWP).Products may contain some residual Pentane that has a very low Global Warming Potential of
Page 4 and 5: Easy to handleClaymaster is manufac
Page 6: Jablite Claymaster Compression Curv
Page 10 and 11: 3.0 APPENDICES
Page 12 and 13: The performance of the product iden
Page 14 and 15: 3 HAZARDS IDENTIFICATIONHuman Healt
Page 18 and 19: 16 OTHER INFORMATIONUses and Restri
Page 20 and 21: Certificate No: FM 01260LocationJab
Page 22 and 23: Certificate No: EMS 559414LocationJ
Page 24: For more informationabout Jablite:0

Clay Heave Protection - Jablite

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?