Download Whole Catalog - Mill Supply, Inc.

applications THat FIT:BUICKMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128BUICK REGAL 81-87BUICK REGAL91-96 Sedan313240REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Fender, Sedan 91-92 159-91-21N.I. Fender, Sedan 93-96 159-93-22N.I. Fender liner, Custom Sedan 91-96 159-91-24BUICK CENTURY 97-05BUICK REGAL 97-0442705499REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Hood latch 81-87 50-73-1331 Lower outer doorskin, 2DR 81-87 64-81-3132 Inner door bottom, 2DR 81-87 59-81-3240 Rocker panel, 2DR with extension 78-87 59-78-4070 Full length floor pan halves, 25”W x 65”L 81-87 55-78-70N.I. Battery hold down bracket 81-87 55-78-9899 Battery tray 81-87 55-78-99GAS TANKSGas tank w/o filler neck, exc. station wagon 78-87 55-78-111Gas tank w/o filler neck, 2DR Turbo 84-87 59-85-115Straps for gas tanks, set 78-87 55-78-115DOOR & WINDOW CRANK HANDLESOutside door handle, chrome, specify L or R 78-87 55-78-381Window crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383WEATHERSTRIPBelt weatherstrip set, 4PC, inner/outer, L/R, with black bead 81-87 593-81-101REPLACEMENT SHEETMETALIndex# Description Year Mill Part#42 Rocker Panel, 4DR (Regal 97-04; Century 97-05) 97-05 159-97-42N.I. Rocker Panel, outer skin only 97-05 159-97-4354 Dog leg (Regal 97-04; Century 97-05) 97-05 159-97-54BUICK SKYLARK 92-98PONTIAC GRAND AM 92-984240REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker panel with extension, 2DR 92-98 650-92-4042 Rocker panel, 4DR 92-98 650-92-422Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128applications THat FIT:BUICKBUICK SKYLARK 67-7222Specify LH (Drivers Side)or RH (Passenger Side)When Ordering.55-64-3955-68-3955-64-40424355-68-406755-64-7355-68-737770 727855-68-74All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.5055-64-749155-64-7555-68-75REPLACEMENT SHEETMETALIndex# Description Year Mill Part#22 Front fender lower rear sec, 16”H 68-69 68-68-2222 Front fender lower rear sec, 16”H 70-72 68-70-2239 Rocker, 2DR, factory style 67 55-64-3939 Rocker, 2DR, factory style 68-72 55-68-3940 Rocker, 2DR 67 55-64-4042 Rocker, 4DR 67 55-64-4243 Rocker, 2DR w/extension 67 55-64-43N.I. Inner rocker 68-72 55-68-4540 Rocker, 2DR w/extension 68-72 55-68-40N.I. Rear quarter up to crown line 68-69 *68-68-5050 Stamped rear quarter panel, 2DR, 22”H 70-72 *68-70-5067 Inner rear wheelhouse 67 55-64-67N.I. Inner rear wheelhouse, full panel (not shown) 68-72 55-68-6870 Floor pan half, trim 3” off rear for 68-72 67-72 55-64-70N.I. Floor pan complete, 1 piece design w/floor braces 68-72 *55-68-70AN.I. Front floor pan 67-72 55-64-7172 Rear floor pan, trim 3” off rear for 68-72 67-72 55-64-72N.I. Floor pan under rear seat, 30L x 25”W, specify L or R 67 55-64-72A73 Trunk floor center, alter to fit 67 55-64-7374 Trunk floor side, alter to fit 67 55-64-7475 Trunk floor brace, alter to fit 67 55-64-7573 Trunk floor center 68-72 55-68-7374 Trunk floor side 68-72 55-68-7475 Trunk floor brace 68-72 55-68-75N.I. Floor to firewall panel extension 67 55-64-7677 Full front floor brace 67-72 55-64-7778 Full middle floor brace 67-72 55-64-7880 Trunk floor, full one piece design, 34”L x 56”W 68-72 *55-68-80N.I. Trunk floor front cross member 68-69 55-68-8691 Battery tray 68-72 55-68-91GAS TANKSDescription Year Part No.All except station wagon 64-67 68-64-110All except station wagon 68-69 68-68-111All except station wagon, w/ evap. emiss. cont. 70 68-70-113All except station wagon 71-72 68-71-114WEATHERSTRIPDescription Year Part No.Molded door seal, Hardtop and Convertible, R & L 64-65 LM-12-CMolded door seal, 2-Door Sedans Only, R & L 64-65 LM-12-DMolded door seal, 2-Door Hardtops and Convertibles, R & L 66-67 LM-12Molded door seal, Hardtops and Convertibles, R & L 68 LM-12-BMolded door seal, 2-Door Hardtops and Convertibles, R & L 69-72 LM-12-ARoof rail seals, 2-Door Hardtops Only, R & L 64-65 RR-5000Roof rail seals, 2-Door Hardtops Only, R & L 66-67 RR-5001Roof rail seals, Convertible Only, 7 Piece Set 66-67 RR-1609Includes all right and left side top rail seals, plus the windshield top sponge seal.Incorporates all original details.Roof rail seals, Convertible Only, 7 Piece Set 68-72 RR-1610Includes all right and left side top rail seals, plus the windshield top sponge seal.Incorporates all original details.Roof rail seals, 2-Door Hardtop, R & L 68 RR-5002Roof rail seals, 2 Door Hardtops Only, R & L 69-72 RR-5003Trunk Seal Kit 64-72 TK-46-16Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com803

applications THat FIT:CHEVROLETCADILLAC ELDORADO 1971-76Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEVROLET 1937-19395122REPLACEMENT SHEETMETALIndex# Description Year Mill Part#22 Front fender lower rear section 16”H 71-76 610-71-2251 Rear quarter section around rear wheel, 29”Hx51”L 71-76 610-71-51Specify LH (Drivers Side)or RH (Passenger Side)When Ordering.4127CHEVROLET 1935-193630542827554053-37-6053-39-606053-37-6153-39-61REPLACEMENT SHEETMETALIndex Description Year Mill Part #27 Lower front cowl section 1936 53-36-27N.I. Inner cowl panel 36 53-35-2840 Rocker panel, 2DR, Sedan & Coupe 36 53-35-40N.I. Rear quarter, lower front section , 35 Master and 35-36 53-35-5436 2DR Sedans55 Rear quarter, lower front section , 35 Master and 35-36 53-35-5536 Coupes60 Tailpan, all Master Coupes and Sedans without 35-36 53-35-60trunk lid (rolls under body, used on vehicles with external spare tire)61 Tailpan, 35 Master & 36 Trunkback Touring & Sport Sdn. 35-36 53-35-61Includes bottom flange, w/s channel and correct body lines72 Rear floor pan kit, 3 pcs; fits Master Sedan 35-36 53-35-7273 Rear floor pan kit, 3 pcs; fits Standard Sedan 36 53-36-7374 Rear floor pan kit, 3 pcs; fits ‘35 Master Coupe & ‘36 Coupe 53-35-74N.I. Trunk floor kit, 3 pcs; fits ‘35 Master/ ‘36 Sedan 35-36 53-35-76Street Rod Style4All tailpans completely rollunder body, include correctbody lines, are full width, diestamped, 18 gauge steelSpecify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com6172, 73, 7453-37-7653-39-76REPLACEMENT SHEETMETALIndex Description Year Mill Part #N.I. Lower front cowl section 37-38 53-37-2727 Lower front cowl section 1939 53-39-2728 Inner lower front cowl section, 2 piece kit, specify L/R 37-39 53-37-2830 Lower Inner and Outer Doorskin, 2DR Sedans 37-39 53-37-30N.I. Lower Inner and Outer Doorskin, Coupes 37-39 53-37-31N.I. Rocker panel, All Coupes 37-39 53-37-4041 Rocker panel, All 2 DR Sedans 37-39 53-37-41N.I. Rocker panel, front door, 4DR 37-39 53-37-42N.I. Inner rocker panel, 2DR Sedan & Coupe 37-39 53-37-43N.I. Rocker panel, rear door, 4DR 37-39 53-37-4454 Rear quarter, lower front section , Sedans 37-39 53-37-54N.I. Rear quarter, lower front section, Coupes 37-39 53-37-5560 Tailpan for Coupe with trunk lid, rolls under body 37-38 53-37-60to the factory spot welds, includes weatherstrip channel (will not fit coupeswith rumble seat) use with trunk floor extension #53-37-7661 Tailpan for Chev. trunkback Sedans 37-38 53-37-61Includes weatherstrip channel, use with trunk floor ext. #53-37-7676 Trunk floor extension (toolbox compartment), 37-38 53-37-76connects the bottom of tailpan to rear edge of trunk floor.Fits all coupe and sedan except sedan delivery60 Tailpan for Chevrolet Coupe 1939 53-39-6061 Tailpan for Chevrolet Sedan trunkback, 1939 53-39-61use with 53-39-7676 Trunk floor extension for Chevrolet Sedan only 1939 53-39-76All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEVROLET 1940applications THat FIT:CHEVROLETCHEVROLET 1941-1948304060275453-41-274553-42-27306175The doorskin kits we carry forthe 1941-1948 Chevroletcars include two pieces, thelower inner and the lowerouter structure. They are diestamped to OEM curves andshapes. Order LH or RH.40B - Rocker Panel with 3 floor braces54727678REPLACEMENT SHEETMETALIndex Description Year Mill Part #27 Lower front cowl section 1940 53-40-2730 Lower Inner and Outer Doorskin, all models 1940 53-40-3040 Rocker panel, All 2 doors and Coupes 1940 53-40-40N.I. Inner rocker panel, 2DR Coupes & Sedans 1940 53-40-4554 Rear quarter, lower front section , all models 1940 53-40-5460 Tailpan, fits Chevrolet Coupe 1940 53-40-6061 Tailpan, fits Chevrolet Sedan and Sedan Delivery 1940 53-40-6172 Rear floor pan kit, 10 pcs; fits 2/4 DR Cpe & Sdn 1940 53-40-7276 Trunk floor kit, 3 pcs; fits 2/4 DR Sdns, street rod style 1940 53-40-76will work with OE style trunk floor extension & tailpan78 Trunk Floor Extension, connects to tail panel Sedan Delv. 1940 53-40-7885 8687Made of 18 gauge diestampedsteel to duplicate the60original features and details.Repairs the area from therear door post to the rearwheel opening. Includes rearbead around fender opening.63Will not fit 4DR.REPLACEMENT SHEETMETALIndex Description Year Mill Part #27 Lower front cowl section 1941 53-41-2727 Lower front cowl section 42-48 53-42-2730 Lower Inner and Outer Doorskin, all models 1941 53-41-30N.I. Lower Inner and Outer Doorskin, Coupe & Sedan 42-48 53-42-30N.I. Lower Inner and Outer Doorskin, Aeroback 42-48 53-42-3140B Rocker panel, with floor braces, kit 41-48 53-41-40B2 door Sedan, Coupe, Aeroback and front door on 4 door modelsIncludes front, center and rear floor brace, order LH or RH KitN.I. Rocker, rear door on 4 door vehicles 41-48 53-41-4245 Foot scraper, rocker extension, 20 gauge, 42-48 53-42-45Bolts to rocker panel located under the fender ext. Made smooth with no holes54 Rear quarter, lower front section , Coupe & Sedan 41-48 53-41-54will not fit 4 door modelsN.I. Rear quarter, lower front section, Aeroback 42-48 53-42-55will not fit 4 door models60 Tailpan, fits all Chevrolet body styles, full street rod 41-48 53-41-60style smoothie. Reaches 1” above taillights without raise section fortaillights. Trim down 3” for stock taillights. Can be used with with stock orcustom bumpers (with gravel guard removed) for a traditional resto-rod look.63 Trunk floor extension, universal 41-48 53-41-6375 Spare tire well 41-48 92-49-7585 Front floor brace (included in 53-41-40B kit) 41-48 53-41-85specify L or R86 Middle floor brace (included in 53-41-40B kit) 41-48 53-41-86universal87 Rear floor brace (included in 53-41-40B kit) universal 41-48 53-41-87All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com5

applications THat FIT:CHEVROLETMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEVROLET 49-52533039474953-49-52 53-51-52561557REPLACEMENT SHEETMETALIndex# Description Year Mill Part#15 Transmission Tunnel 49-54 53-49-1530 Door bottom kit, 2pcs; lower inner & outer 49-52 53-49-3039 Rocker, 2 DR, factory quality 49-52 53-49-39N.I. Rocker, 2DR 49-52 53-49-40N.I. Rocker, 4DR 49-52 53-49-42N.I. Rocker, 2DR with extension 49-52 53-49-4347 Rocker, 4DR with extension 49-52 53-49-4749 Door post brace, front, specify L or R 49-52 53-49-4952 Upper rear wheel arch, 2DR 49-50 53-49-5252 Upper rear wheel arch 51-52 53-51-5253 Rear quarter lwr front section, factory quality, 2DR 49-52 53-49-53N.I. Rear quarter lower front sec, 10”Hx25”L, 2DR 49-52 53-49-5456 Rear quarter lower rear sec, 14”H 49-52 53-49-5657 Rear quarter lower rear sec; factory quality 49-52 53-49-5761 Tailpan, 2/4DR, Coupe, Conv., Hardtop 49-50 53-49-6161B Tailpan, 2/4DR, Fleetline Fastback 49-50 53-49-61B61C Tailpan, Sedan Delivery 49-52 53-49-61C62 Tailpan, 2/4DR Coupe, Conv., Hardtop 51-52 53-51-6262B Tailpan, 2/4DR Fleetline, Fastback 51-52 53-51-62B66 Trunk floor rear section (above 53-49-67) 49-52 53-49-6667 Trunk floor rear brace w/2 body brackets 49-52 53-49-6771 Front floor pan, 24”W x 34”L, specify L or R 49-52 53-49-7172 Rear floor pan, specify L or R 49-52 53-49-7275 Spare tire well 49-52 92-49-7576 Toe board, specify L or R 49-52 53-49-7677 Floor brace, first row, fits either side 49-52 53-49-7778 Floor brace, second row, specify L or R 49-52 53-49-78N.I. Floor brace, third row, specify L or R 49-52 53-49-79N.I. Battery tray 49-54 53-49-9961 62CHEVROLET 53-5461B62B316961C40666742437067 6 L 76R71 L 71 R72 72Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com757778785456REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Transmission Tunnel 49-54 53-49-15N.I. Front fender lower rear section 53-54 53-53-2131 Door bottom, inner and outer 2 piece kit 53-54 53-53-3140 Rocker, 2DR 53-54 53-53-4042 Rocker, 4DR 53-54 53-53-4243 Inner Rocker, 2DR 53-54 53-53-43N.I. Upper rear wheel arch, 10.5”H x 36”L; 7” above arch 53-54 53-53-5254 Rear quarter lower front section 53-54 53-53-5456 Rear quarter lower rear sec, 13”Hx24”L 53-54 53-53-56N.I. Toe board 53-54 53-53-6970 Floor pan, front 53-54 53-53-7072 Floor pan, rear (rear foot area) 53-54 53-53-7276 Spare tire well 53-54 53-53-7678 Trunk floor extension 53-54 53-53-7879 Inner lower rear quarter section, trunk drop 53-54 53-53-79N.I. Battery tray 49-54 53-49-99All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.797672

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128WINDSHIELD Panels that fit Chev. 55-57applications THat FIT:CHEVROLETFRONT FENDER Panels that fit Chev. 55-571955 19571853-55-2253-56-2253-57-22240101B53-55-2553-56-2553-55-2653-55-2701C01D01EWINDSHIELD PANELSIndex# Description Year Mill Part#01 Winshield frame, Upper, Convertible 55-57 53-55-01N.I. Lower outer corner windshield moulding, conv; pair 55-57 53-55-01A01B Lower windshield moulding, conv., Stain.Steel, pair 55-57 53-55-01B01C Top header, convertible 55-57 53-55-01C01D Tack Strip, 3 piece convertible 55-57 53-55-01D01E Retainer windlace “A” pillar, pair 55-57 53-55-01EN.I. Top upper outer windshield moulding, convertible 55-57 53-55-01FRADIATOR Panels that fit Chev. 55-5753-56-2753-55-27A0253-57-26 53-57-27A0353-55-1353-57-13RADIATOR PANELSIndex# Description Year Mill Part#N.I. Splash shield under radiator, specify L or R 55-57 53-55-02CN.I. Radiator splash shield, V-8 only 55-57 53-55-02B03 Grille support bar 57 53-57-03N.I. Front bumper outer bracket, specify L or R 57 53-57-0413 Upper radiator support bar 55 53-55-1313 Upper radiator panel only 57 53-57-13CONVERTIBLE TOP Panels that fit Chev. 55-5714CONVERTIBLE TOP PANELS19Index# Description Year Mill Part#14 Convertible top boot retainer 55-57 53-55-1419 Convertible top motor cover 55-57 53-55-1953-57-28FRONT FENDER PANELSIndex# Description Year Mill Part#02 Front splash shield, specify L or R 57 53-57-0218 Brace from cowl to floor, 55 all models, 56-57 conv. only 53-55-18N.I. Front inner fender, complete 55 *53-55-2122 Front fender, lower rear sec, 15”H 55 53-55-2222 Front fender, lower rear sec, 15”H 56 53-56-2222 Front fender, lower rear sec, 13”H 57 53-57-22N.I. Front wheel splash shield, specify L or R 55 53-55-2324 Upper front fender support bracket 55-56 53-55-2425 Upper headlight panel 5” wide 55 53-55-2525 Upper headlight panel 8” wide 56 53-56-25N.I. Upper headlight panel, 6” wide 57 53-57-2526 Upper headlight panel, large 55 53-55-2626 Inner front fender wheelhouse 57 53-57-26N.I. Inner front fender lower extension 56 53-56-26B27 Headlight upper mounting ring, universal 55 53-55-2727A Lower inner front fender brace, specify L or R 55 53-55-27A27 Outer headlight housing 56 53-56-2727A Lower inner front fender brace 57 53-57-27AN.I. Mtg. Bracket rear of front fender to upper cowl, Univ. 57 53-57-27BN.I. Cowl side panel, specify L or R 55-56 53-55-2828 Cowl, outer side, specify L or R 57 53-57-2891 Battery tray, w/o air conditioning 57 53-57-91N.I. Battery tray 55-57 53-55-9991All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com7

applications THat FIT:CHEVROLETDOOR Panels that fit Chev. 55-57Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128REAR QTR./WNDW. Panels that fit Chev. 55-576730 31683236 37CDOOR SKIN PANELSIndex# Description Year Mill Part#30 Doorskin, 2DR, full outer, Hardtop & Conv. factory style 55 & 57 *53-55-30N.I. Doorskin 2DR, full, Hardtop & Convertible only 56 *53-56-3031 Doorskin, 2DR, full outer, Sedan, specify L or R 55-57 *53-55-3132 Inner door bottom, 2DR, Hardtop & Convertible 55-57 53-55-32N.I. Door handle reinforcement, universal, (pair) 55-57 53-55-5336 “A” pillar panel partial, specify L or R 55-57 53-55-36N.I. “B” pillar brace, Convertible, modify for Hardtop 55-57 53-55-37N.I. “B” pillar bracket, Convertible, specify L or R 55-57 53-55-37AN.I. “B” pillar full, Hardtop & Convertible, specify L or R 55-57 53-55-37B37C “B” pillar reinforcement, Hardtop & Conv; specify L or R 55-57 53-55-37CN.I. Door handle reinforcement, sold in pairs only 55-57 53-55-53N.I. Lower door pillar, specify L or R 55-57 53-55-7867BREAR QUARTER/WINDOW PANELSIndex# Description Year Mill Part#67 Inner quarter front panel, Convertible, specify L or R 55-57 53-55-6767B Upper rear panel brace, Conv. L or R, beneath 53-55-67C 55-57 53-55-67BN.I. Rear window to trunk panel, Convertible 55-57 53-55-67CN.I. Rear window to trunk panel, Hardtop 55-57 53-55-67D68 Top mount assy, converts Hardtops to Conv; specify L or R 55-57 53-55-68N.I. Drain channel reinforcement, Convertible 55-57 53-55-9394 Drain trough ends, Convertible 55-57 53-55-94N.I. Drain trough center, Convertible 55-57 53-55-95WHEELHOUSES that fit Chev. 55-5794ROCKERS that fit Chev. 55-57ROCKER PANELSIndex Description Year Mill Part#39 Rocker, 2DR, factory style 55 53-55-3939 Rocker, 2DR, factory style 56-57 53-56-3940 Rocker, 2DR & Sedan, slip over style 55 53-55-4040 Rocker, 2DR & Sedan, slip over style 56-57 53-56-40N.I. Rocker, 4DR, slip over style 55 53-55-4242 Rocker, 4DR, slip over style 56-57 53-56-4243 Rocker w/extension, 2DR & Sedan Delivery 55 53-55-4343 Rocker w/extension, 2DR & Sedan Delivery 56-57 53-56-43N.I. Rocker, 4DR, factory style 56-57 53-56-4445 Rocker, inner, 2 DR 55-57 53-55-45N.I. Rocker end cap w/fender mnt. bkt. (set) specify L or R 57 53-57-46REAR WHEELHOUSESIndex# Description Year Mill Part#80 Outer Rear wheelhouse, front sec, HT, rocker to middle 55-57 53-55-80N.I. Rear wheelhouse front sec., rocker to middle, Sedan 55 53-55-80A80A Rear wheelhouse front sec., rocker to middle, Sedan 56-57 53-56-80A81 Outer Rear wheelhouse, front sec, Conv; rocker to middle 55-57 53-55-81N.I. Wheelhouse outer support, convertible, specify L or R 55-57 53-55-81A82 Outer Rear wheelhouse, H.T. and Conv. 55-57 53-55-82from middle of rear wheelhouse to rear extensionN.I. Outer Rear wheelhouse, Sedan 55 53-55-82Afrom middle of rear wheelhouse to rear extensionN.I. Outer Rear wheelhouse, Sedan, specify L or R 56-57 53-56-82Bfrom middle of rear wheelhouse to rear extensionN.I. Outer rear wheelhouse rear ext; Exc. Sedan Del. & Sta. Wagon 55 53-55-82F82G Outer rear wheelhouse rear ext; Exc. Sedan Del. & Sta. Wagon 56-57 53-56-82G83 Inner rear wheelhouse section, Exc. Station wagon 55-57 53-55-83N.I. Inner rear wheelhouse, Convertible 55-57 53-55-83AN.I. Inner rear wheelhouse, 2DR Hardtop 55-57 53-55-83BN.I. Inner rear wheelhouse, 4DR Sedan 55-57 53-55-83C83D Rear inner wheelwell, 2DR Sedan 55-57 53-55-83D83E Inner wheelwell, Station Wagon 57 53-57-83E8Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128applications THat FIT:CHEVROLETREAR QUARTER Panels that fit Chev. 55-57484953-57-5653-55-5053-57-5753-57-5453-56-5053-55-5758A58B53-55-50N57A53-55-585253-57-5853-55-5453-57-5053-55-5153-55-56REAR QUARTER PANELSIndex# Description Year Mill Part#48 Outer dog leg 4DR (alter for 55-56) 57 53-57-4849 Inner dog leg, 4DR 55-57 53-55-4950 Rear quarter panel, full 2DR, Hardtop & Conv. 55 *53-55-50must be trimmed at upper front corner to fit Sedan50 Rear quarter panel, full 56 *53-56-5050N Rear quarter panel, Nomad 55 *53-55-50N50 Rear quarter panel, 2 DR with moulding holes 57 *53-57-5051 Rear quarter, lower half 55 *53-55-5152 Gas filler bracket, mounts inside of quarter 55 53-55-5254 Rear quarter lower front sec, 19”Hx45”L 55 53-55-5454 Rear quarter, front, 20”Hx38”L, Hardtop & Conv. 56 53-56-5454 Rear quarter front sec. 18”Hx36”L 57 53-57-5456 Rear quarter lower rear sec, 15”Hx45”L 55 53-55-5656 Rear quarter rear sec 16”Hx62”L 56 53-56-5656 Rear quarter rear half 27”Hx65”L 57 53-57-5657 Filler/Quarter panel at rear bumper, universal 55 53-55-5757 Rear quarter lower rear sec. 13”x56” 57 53-57-5757A Reinforcement from quarter panel to rear bumper, pair 55 53-55-57A58 Quarter to trunk panel, full 55 53-55-5858A Quarter to trunk panel, partial 55 53-55-58A58B Quarter to trunk panel, partial 56 53-56-58B58 Quarter to trunk panel 57 53-57-5853-56-5453-56-56All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com9

applications THat FIT:CHEVROLETFLOOR PANS that fit CHEV. 55-57Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128FLOOR BRACES that fit CHEV. 55-57FLOOR BRACESIndex# Description Year Mill Part#84 Center Floor brace, 2DR, Exc. St.W. & Sedan Del. 55-57 53-55-8484A Center floor brace end only, specify L or R, 55-57 53-55-84Aouter of 53-55-8485 Floor brace under seat 55-57 53-55-8586 Floor brace, front floor at cowl 55-57 53-55-8687 Floor brace, front long (exc. conv.) 55-57 53-55-8788 Floor brace, front long, conv. only 55-57 53-55-8888A Front floor brace end only, specify L or R, 55-57 53-55-88Aouter of 53-55-87/8889 Floor brace front short, all 55-57 53-55-8990 Floor brace rear short H.T. & Conv. 55-57 53-55-9092 Floor brace, rear at shock mount 55-57 53-55-92ST/W, Sedan Del. and NomadTRUNK FLOOR ASSY. that fit Chev. 55-57Top View70ABottom ViewFLOOR PANSIndex# Description Year Mill Part#15 Transmission hump 55-57 53-55-1569 Toe board floor section 55-57 53-55-6970 Floor pan, full half, Hardtop/Sedan, Alter for Conv. 55-57 *53-55-7070A Floor pan, full L and R side with floor braces, Sedan 55-57 *53-55-70A71 Front floor pan, 19”x24” 55-57 53-55-7172 Rear floor pan, convertible19”x23” 55-57 53-55-7272H Rear floor pan, Hardtop & Sedan 55-57 53-55-72HN.I. Rear floor reinforcement, specify L or R 55-57 53-55-72BN.I. Rear seat riser, convertible, specify L or R 55-57 53-55-72CN.I. Rear seat riser, hardtop, universal 55-57 53-55-72DN.I. Reinforcement floor pan rear body mount 55-57 53-55-72EN.I. Convertible top reinforcement floor, one pair 55-57 53-55-72F73 Floor pan under seat, 19”x30” 55-57 53-55-73N.I. Seat belt anchor plate, universal 55-57 53-55-73A79GCOMPLETE TRUNK PANELSIndex# Description Year Mill Part#79G Trunk floor assembly complete with tire well55-57 *53-55-79GN.I. Trunk floor assembly complete without tire well 55-57 *53-55-79HSpecify LH (Drivers Side) or RH (Passenger Side) When Ordering.10 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128applications THat FIT:CHEVROLETTRUNK FLOORS that fit CHEV. 55-57 TRUNK Panels that fit Chev. 55-57646566B66C 66D 66ETAILGATE & TRUNK PANELSIndex# Description Year Mill Part#N.I. Tailgate, outer, Station Wagon 55-57 *53-55-63N.I. Tailgate outer, Nomad & Safari Pontiac Wagon 55-57 *53-55-63A64 Trunk lid outer, w/keyhole & license plate mtg. holes 55-56 *53-55-64N.I. Trunk lid outer, no holes 55-57 *53-55-64AN.I. Trunk lid outer, w/keyholes & license plate mtg. holes 57 *53-57-64N.I. Deck lid to top of qtr. filler pnl., Conv./H.T; specify L or R 57 53-57-64A65 Trunk inner lid, partial 6” 55-57 53-55-65N.I. Rear back rest panel assy, Convertible 55-57 53-55-66N.I. Rear back rest support panel, Convertible 55-57 53-55-66A66B Rear back rest panel bracket, Convertible, specify L or R 55-57 53-55-66B66C Trunk lid hinge brace, Convertible, specify L or R 55-57 53-55-66C66D Rear window to trunk panel brace, conv; specify L or R 55-57 53-55-66D66E Inner trunk panel, Convertible, specify L or R 55-57 53-55-66EN.I. Rear body mount reinforcement, Conv; specify L or R 55-57 53-55-66GN.I. Trunk lid hinge assembly, Convertible, pair 55-57 53-55-66HN.I. Trunk lid assy. w/key & license plate mtg. bracket holes 55-56 *53-55-66JN.I. Trunk lid assy without holes 55-56 *53-55-66KN.I. Trunk lid assembly with holes 57 *53-57-66NN.I. Trunk lid assy without holes 57 *53-57-66PTRUNK FLOORSIndex# Description Year Mill Part#47 Rear inner trunk wall corner, specify L or R 55-57 53-55-4760 Tailpan, except wagon & Sedan Delivery 55-57 53-55-60N.I. Tail panel tailgate brace (Station Wagon & Nomad) 55-57 53-55-60BN.I. Tailpan, wagon & Sedan Delivery 55-57 53-55-6162 Tailpan brace, all models 55-57 53-55-62N.I. Rear body mount reinforcement, conv; specify L or R 55-57 53-55-66G74 Trunk floor outer side to quarter 55 53-55-7475 Spare tire well, except station wagon 55-57 53-55-75N.I. Spare tire well, S/W, lays flat in center 55-57 53-55-75A76 Trunk floor outer side, 10”wide, HT 55-57 53-55-7677 Trunk floor rear 10” 55-57 53-55-7777A Trunk floor reinforcement center 55-57 53-55-77Ahardtop/convertible pinion snubberN.I. Rear snubber mounting bracket 55-57 53-55-77B79 Trunk floor center 55-57 53-55-7979F Trunk floor, full55-57 *53-55-79FN.I. Cargo floor, 48”W x 45”L, back seat to 55-57 *53-55-79Awheel well, 2/4 DR, Station Wagon & NomadN.I. Cargo floor extension, Station Wagon, univ 55-57 53-55-79BN.I. Trunk shock mount 55-57 53-55-96N.I. Trunk shock mount, Wagon 55-57 53-55-96BN.I. Trunk shock mount reinforcement 55-57 53-55-97WEATHERSTRIP that fits Chev. 55-57WEATHERSTRIPDescription Year Mill Part#Door weatherstrip w/clips & molded ends, 2 door HT & Conv. 55-57 53-55-101Door weatherstrip w/clips, w/o molded ends, 2 door HT & Conv. 55-57 53-55-102Door weatherstrip w/clips and molded ends, 2 door Nomad 55-57 53-55-103Door weatherstrip w/clips without molded ends, 2 door Sedan 55-57 53-55-104Convertible top header seal 55-57 53-55-110Windshield pillar post weatherstrip, Hardtop, Conv. and Nomad 55-57 53-55-111Trunk weatherstrip with exact profile 55-56 53-55-120Glass ChannelsFront glass channel, fit 150 model 55 53-55-130Front glass channel, fits all models except 1955 - 150 55-57 53-55-131Front glass channel, Convertible 55-57 53-55-132Rear glass channel, 2 door Hardtop 55-57 53-55-137Rear glass channel, 4 door Hardtop 55-57 53-55-138Rear glass channel, 2/4 door sedan 55-57 53-55-139GAS TANKSN.I. Gas tank, round weld 55-56 53-55-115N.I. Gas tank, square weld 55-56 53-55-116N.I. Gas tank strap anchor bracket kit, except St.W. & Nomad 55-57 53-55-117All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com11

applications THat FIT:CHEVROLETCHEVROLET 1958Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEVROLET 1959 - 60334033404554565556815772827175837070748476797277738182REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Upper headlight panel, 6”wide 58 53-58-25N.I. Outer headlight panel 58 53-58-2733 Convertible top boot retainer 58 53-58-3340 Rocker panel, 2DR, factory type 58 53-58-4045 Inner Rocker 58 53-58-4555 Rear quarter lower front sec. 2DR, 7” tall 58 53-58-5556 Rear quarter, rear sec 16”Hx51”L 58 53-58-5657 Rear quarter lower rear sec, 37”L 58 53-58-5770 Front floor pan, specify L or R 58 53-58-7071 Toeboard, specify L or R 58 53-58-7172 Trunk floor half, specify L or R 58 53-58-7273 Rear floor pan, specify L or R 58 53-58-7376 Spare tire well, bottom (no sides) 58 53-58-7679 Trunk filler panel, specify L or R 58 53-58-7981 First floor brace from front, specify L or R 58 53-58-81N.I. Second floor brace from front, specify L or R 58 53-58-82N.I. Third floor brace from front, specify L or R 58 53-58-83N.I. Fourth floor brace from front, specify L or R 58 53-58-8491 Battery tray 58 53-58-91WINDOW CRANK HANDLESWindow crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383WEATHERSTRIPDoor weatherstrip w/molded corners, 58 53-58-1012 door sedan, Bel Air, DelrayDoor weatherstrrip w/clips & molded ends, 2DR H/T & Conv. 58 53-58-102Windshield pillar post weatherstrip w/clips, H/T & Conv. 58 53-58-1108384917653-59-78L53-60-78R53-59-7953-60-79REPLACEMENT SHEETMETALIndex# Description Year Mill Part#33 Convertible boot retainer 59-60 53-59-3340 Rocker 2DR 59-60 53-59-40N.I. Rocker 4DR 59-60 53-59-42N.I. Rocker 2DR with extension 59-60 53-59-4354 Rear quarter lower front sec, 16”Hx37”L 59 53-59-54N.I. Rear quarter front sec, 25”Hx39”L 60 53-60-5456 Rear quarter rear half 59 53-59-56N.I. Rear quarter rear half, 15”Hx68”L 60 53-60-56N.I. Rear quarter lower rear sec, 15”Hx33”L 60 53-60-5770 Full floor pan, factory style, 2/4DR, Hardtop, 59-60 *53-59-70Convertible, Station Wagon, braces not included72 Front floor pan half 59-60 53-59-7274 Rear floor pan half 59-60 53-59-7475 Floor pan under seat 59-60 53-59-7576 Spare tire well bottom 59-60 53-59-7677 Spare tire well, left side wall 59 53-59-7778 Trunk floor side sec., 1959-60 LH, 1959 RH 59-60 53-59-7878R Trunk floor side section, 1960 RH only 60 53-60-78R79 Trunk floor center section, modify for 1959 60 53-59-7979 Trunk floor rear center 9”, modify for 1959 60 53-60-7981 Floor brace, front, specify L or R 59-60 53-59-8182 Floor brace, middle, exc. Convertible, specify L or R 59-60 53-59-8283 Floor brace under seat/mnt. bracket, specify L or R 59-60 53-59-8384 Floor brace, rear except Conv; specify L or R 59-60 53-59-84WINDOW CRANK HANDLESWindow crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383WEATHERSTRIPDoor weatherstrip w/clips & molded ends, 2DR Htp/Conv 59-60 53-59-101Pillar post weatherstrip w/clips & molded ends, 2DR hardtop 59-60 53-59-111Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.12 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128applications THat FIT:CHEVROLETCHEVROLET 1961 - 6453-63-5053-64-5053-61-2253-61-3053-64-5653-63-2253-63-303153-63-6053-64-6053-61-5439424353-62-52All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.3253-61-5253-61-5853-62-57REPLACEMENT SHEETMETALIndex# Description Year Mill Part#22 Front fender, lower rear section 61 53-61-2222 Front fender lower rear sec. 63 53-63-22N.I. Front fender lower rear sec. 64 53-64-2230 Full outer doorskin, 2DR Hardtop & convertible 61-62 *53-61-3030 Full outer doorskin, 2 DR, factory style 63-64 *53-63-3031 Doorskin, 2DR, lower 8” H (alter for 4DR) 63-64 53-63-3132 Inner door bottom, 2DR 61-64 53-61-3239 Rocker, 2DR, factory style 61-64 53-61-3942 Rocker 4DR 61-64 53-61-4243 Rocker 2DR with extension 61-64 53-61-43N.I. Outer dog leg 15”H 63 53-63-48AN.I. Rear quarter rear half, 25”Hx68”L 62 53-62-5050 Rear quarter rear half, 22”Hx67”L 63 53-63-5050 Rear quarter panel, 2DR, 29”H x 92”L 64 *53-64-5052 Upper rear wheel arch 61 53-61-5252 Upper rear wheel arch 62 53-62-52N.I. Upper rear wheel arch 63 53-63-52N.I. Upper rear wheel arch 64 53-64-5254 Rear quarter, lower front 24”Hx34”L 61-62 53-61-54N.I. Rear quarter lower front, 27”Hx39”L 63 53-63-5456 Rear quarter rear half, 23”Hx67”L 64 53-64-5657 Rear quarter rear section 22”Hx34”L 62 53-62-57N.I. Rear quarter lower rear section, 21”Hx36”L 63 53-63-57N.I. Rear quarter lower rear sec, 17”Hx40”L 64 53-64-5758 Rear quarter lower rear section 61 53-61-58N.I. Rear quarter lower rear section 63 53-63-58N.I. Rear quarter lower rear section 64 53-64-5860 Rear valance, exc. S.W. 63 53-63-6060 Rear valance, exc. S.W. 64 53-64-60Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com13

applications THat FIT:CHEVROLETMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEVROLET 1961 - 646976B77A7053-61-807770A717953-62-80 53-64-8053-64-91380 38373A73B7270B747670CSpecify LH (Drivers Side) or RH (Passenger Side) When Ordering.14 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com7373C73D75AREPLACEMENT SHEETMETALIndex# Description Year Mill Part#69 Toe board 61-64 53-61-6970 Front floor pan, 24”Wx34”L 61-64 53-61-7070A Floor pan full length w/cntr. seam, USA, specify L or R 61-64 *53-61-70A70B Full floor pan complete assembly61-64 *53-61-70B70C Full floor pan complete assembly with pans61-64 *53-61-70Cunder rear seatand braces. Must remove body from car to install.71 Rear floor pan, 21”L 61-64 53-61-7172 Floor brace under rear seat, 18” 61-64 53-61-7273 Floor brace under rear of front seat, 25” 61-64 53-61-7373A Rear floor brace under rear seat 61-64 53-61-73A73B Trunk floor upper brace at inner wheel well, univ. 61-64 53-61-73B73C Floor brace at cowl (partial) 61-64 53-61-73C73D Front floor brace, at seat mount 61-64 53-61-73D74 Floor pan under rear seat 61-64 53-61-7475A Trunk flr upper over axle, 47”W x 37”L, ext. sta. wgn. 61-64 53-61-75A76 Trunk floor full, 62-64, modify for 61, USA made 62-64 *53-62-7676B Brace for rear trunk floor 61-64 53-61-76B77 Trunk floor sides, specify L or R 61-64 53-61-7777A Trunk floor outer section extension 61 53-61-77AN.I. Trunk floor center, 27”x39” 61-64 53-61-7879 Trunk box brace 61-64 53-61-7980 Lower rear quarter, inner section 61 53-61-8080 Lower rear quarter, inner section 62 53-62-80N.I. Lower rear quarter, inner section 63 53-63-8080 Lower rear quarter, inner section 64 53-64-8091 Battery tray 64 53-64-91WINDOW CRANK HANDLES380 Window crank handle w/black knob, universal 53-58-380383 Window crank handle w/clear knob, universal 53-58-383GAS TANKGas tank, All except station wagon 61-64 53-61-110WEATHERSTRIPDoor weatherstrip w/clips and molded ends, 2 door 61-62 53-61-101hardtop and conv.Front door weatherstrip, 4DR Sedan and Wagon 63-64 53-63-101Door weatherstrip w/clips & molded ends, 2DR Htp./Conv 63-64 53-63-102Door weatherstrip w/clips 2dr. sedan 61-64 53-61-102All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128applications THat FIT:CHEVROLETCHEVROLET 1965-66849253-65-9153-66-91224053-65-5053-66-5054 5665REPLACEMENT SHEETMETALIndex# Description Year Mill Part#22 Front fender lower rear sec 65-66 53-65-2240 Rocker, 2DR 65-70 53-65-40N.I. Rocker, 4DR 65-70 53-65-42N.I. Outer dog leg, 18”H 65 53-65-4850 Rear quarter, 2DR, fits Impala only 65 *53-65-5050 Rear quarter, 2DR, fits Impala only 66 *53-66-5054 Quarter panel, front section 65-66 53-65-5456 Rear quarter rear sec, 19”Hx63”L, no indent for mldg. 65 53-65-5665 Rear window to trunk panel, Impala, 2DR Hardtop 65-66 53-65-6572 Front floor pan, specify L or R 65-70 53-65-7274 Rear floor pan, specify L or R 65-70 53-65-7475 Outer rear wheelhouse, except for Conv. & Wagon 65-66 53-65-7577 Trunk floor filler panel ext. 65-66 53-65-7778 Trunk floor, outer section 65-70 53-65-7879 Trunk floor, center 65-70 53-65-7981 Floor brace over rear axle, parallel to frame, L or R 65-70 53-65-8182 Floor brace front, specify L or R 65-66 53-65-8283 Floor brace middle, specify L or R 65-66 53-65-8384 Floor brace rear, specify L or R 65-66 53-65-8491 Battery tray 65 53-65-9191 Battery tray 66 53-66-9192 Battery retainer 65-70 53-65-9295 Trunk brace gas tank mount, univ. (2 required) 65-66 53-65-95WINDOW CRANK HANDLES380 Window crank handle w/black knob, universal 53-58-380383 Window crank handle w/clear knob, universal 53-58-383GAS TANKN.I. All except station wagon 65-66 53-65-110WEATHERSTRIP95 380 3837572 7477AV-4747 - 50ftDoor inner beltweatherstripAll cars 1955-’70AV-16524 - 50ftDoor seal weatherstripfits GM 1964-’72AV-16525 - 50ftDoor seal weatherstripfits GM 1964-72WEATHERSTRIP ADHESIVE7879 8182 83All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.AV-4749 - 50ftAV-16394 - 15ftDeck lid weatherstrip:fits GM Cars 1956-’70High strength weatherstrip adhesive. Bondsrubber and vinyl weatherstrip on doors, trunksand windows.3M-8001 - Super weatherstrip adhesive,yellow, 5 oz.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com15

applications THat FIT:CHEVROLETMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEVROLET 1967-7053-68-9153-67-919253-67-22 53-69-2250REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Engine mount w/350 c.i. engine, specify L or R 68-76 53-68-12N.I. Armrest base, black plastic, paint to match, L or R 68-70 53-68-14N.I. Armrest base mouldings, stainless steel, set of L & R 68-70 53-68-1722 Front fender lower rear sec. 67-68 53-67-2222 Front fender lower rear section, 18”H 69-70 53-69-22N.I. Rocker, 2DR 65-70 53-65-40N.I. Rocker, 4DR 65-70 53-65-4250 Stamped rear quarter, 2DR, fits Impala only 69-70 *53-69-5054 Rear quarter lower front sec 23”Hx37”L 67-68 53-68-5456 Rear quarter, rear sec, 19”Hx66”L 67-68 53-68-5672 Front floor pan, specify L or R 65-70 53-65-7274 Rear floor pan, specify L or R 65-70 53-65-7478 Trunk floor, outer section 65-70 53-65-7879 Trunk floor, center, 39”L x 21”W 65-70 53-65-7981 Floor brace over rear axle, parallel to frame, L or R 65-70 53-65-8191 Battery tray 67 53-67-9191 Battery tray 68 53-68-9192 Battery retainer 65-70 53-65-925456380 383WINDOW CRANK HANDLES380 Window crank handle w/black knob, universal 53-58-380383 Window crank handle w/clear knob, universal 53-58-38372 74787981Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.16 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEVROLET 1971-76applications THat FIT:CHEVROLETCHEVROLET IMPALA/CAPRICE 1977-90PONTIAC PARISIENNE/SAFARI 1983-89224053-71-504092REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Engine mount w/350 c.i. engine, specify L or R 68-76 53-68-1222 Front fender lower rear section, 18”H 71-76 53-71-2240 Rocker, 2DR 71-76 53-71-4050 Stamped rear quarter, 2DR 71-73 *53-71-50modify for convertible and fender skirts, will not fit Caprice50 Stamped rear quarter, 2DR (will not fit 75-76 Caprice) 74-76 *53-74-50modify for convertible and fender skirts92 Battery retainer 71-75 53-65-92DOOR & WINDOW CRANK HANDLES383 Outside door handle, chrome 53-75-383380 Window crank handle w/black knob, universal 53-58-380383 Window crank handle w/clear knob, universal 53-58-383WEATHERSTRIPN.I. Extruded foam rubber trunk seal weatherstrip 74-96 53-74-89DASH TOPSDashTop covers fit rightover existing dash, makesyour dash look new again.53-74-5053-75-383DT-212 & DT-213380 53-58-383Description Year Mill Part #Dashboard cover, fits Caprice, Impala, with center speaker 71-76 DT-212Dashboard cover, fits Caprice, Impala, with outside speakers 71-76 DT-213WEATHERSTRIP42REPLACEMENT SHEETMETALIndex Description Year Mill Part#N.I. Hood latch (fits Impala/Caprice thru 1996) 81-90 50-73-1340 Rocker, 2DR 77-90 53-77-4042 Rocker, 4DR 77-90 53-77-42GAS TANKSGas tank with filler neck, exc. station wagon 77-79 *53-77-110Gas tank w/filler neck, w/o fuel inj., exc. S/W 80-88 *53-80-111Gas tank w/filler neck, w/ fuel inj., exc. S/W 84-89 *53-84-112Gas tank w/filler neck, w/fuel inj., exc S/W 90 *53-90-113DOOR & WINDOW CRANK HANDLESOutside door handle, chrome 53-75-383Inside door handle, chrome 53-77-384Window crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383WEATHERSTRIPDoor seal set, 2DR, front doors, LH and RH door 80-90 53-80-101Door seal set, 4DR, front doors, L & R door, lg blue clips 80-90 53-80-102Door seal set, 4DR, front doors, L & R door, sm white clips 80-90 53-80-103Door seal set, 4DR, rear doors, LH and RH door 80-90 53-80-104Belt weatherstrip, 4pc kit, 2DR, inner/outer, LH & RH 80-90 53-80-106Trunk seal weatherstrip, extruded foam rubber 74-96 53-74-89DASH TOPSDT-203 & DT-203DDashTop covers fit right over existing dash, makes your dash look new again.Description Year Mill Part #Dashtop cover, fits Caprice, Impala, with center speaker 77-90 DT-203Dashtop cover, fits Caprice, Impala, with outside speakers 77-90 DT-203DCHEV. BERETTA 1987-96AV-16892 - 25ftRoof rail weatherstripfits GM 1968-’77AV-16523 - 50ftDoor seal weatherstripfits GM 1972-on3M-8001 - Super weatherstrip adhesive, yellow,5 oz. Bonds rubber and vinyl weatherstrip ondoors, trunks and windows.AV-16522 - 25ftTop of door sealfits GM late 1970’s40Index Description Year Mill Part#40 Rocker panel, slip on style 87-96 172-87-40All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com17

applications THat FIT:CHEVROLETMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEV. CAMARO 1967-685055 576000 52-67-010252-68-0102A 0406 06B06C06D1111A52-67-1352-68-1315A15B 16202322242652-68-2752-67-2752-67-303952-68-3031404959REPLACEMENT SHEETMETALIndex# Description Year Mill Part#00 Radiator support 67-69 *52-67-0001 Front apron, fits RS only 67 52-67-0101 Front apron, fits RS only 68 52-68-0102 Front apron, except RS 67-68 52-67-0202A Front Spoiler, plastic 67-68 52-67-02AN.I. Front Spoiler mount, 3 pc. kit 67-68 52-67-02BN.I. Front bumper, chrome 67-68 52-67-0304 Upper header panel 67-68 52-67-0406 Grille, standard black with lamp holes 67 52-67-0606B Grille, RS black 67 52-67-06B06C Grille, Standard, SS 68 52-68-06C06D Grille, RS black/chrome 68 52-68-06DN.I. Outer drip rail molding set (6 pcs) 67-69 52-67-0811A Hood scoop ornament set, 67 to early 68 Camaro SS 67-68 52-67-11AIncludes inserts & gasket material for one hood11 Hood scoop ornament set, 4 stack style, Camaro SS, 68-69 52-67-11Includes inserts, screens & plates for one hoodN.I. Engine mount, fits 302, 327, 350 cu.in. V8 engine 67-68 53-68-1213 Upper dash (metal) 67 52-67-1313 Upper dash (metal) 68 52-68-13N.I. Armrest base, black plastic 68-69 53-68-14N.I. Cowl upper inner panel; modify for 1967 68-69 52-67-1515A Cowl side panel, specify L or R 67-69 52-67-15A15B Cowl vent grille panel 67-69 52-67-15BN.I. Cowl panel lower, Coupe with A/C, LH only 67-69 52-67-15CL16 Heater adaptor plate, big block 67-69 52-67-16N.I. Armrest base mouldings, stainless steel, pair 68-69 53-68-17N.I. Kick panel support 67-69 52-67-1820 Front fender, with R/S, includes 52-67-24 67 *52-67-20N.I. Front fender, standard, includes 52-67-24 67 *52-67-21N.I. Front fender with R/S, includes 52-67-24 68 *52-68-20N.I. Front fender, standard, includes 52-67-24 68 *52-68-2122 Front fender lower rear sec. 13”H 67-68 52-67-2223 Front fender brace, pair 67-69 52-67-2324 Front fender, front extension 67-68 52-67-2426 Inner front fender (outer wheelhouse) 67-68 52-67-2627 Front shock support & bolt plate 67 52-67-2727 Front shock support & bolt plate 68-69 52-68-2730 Outer doorskin, full 67 *52-67-3030 Outer doorskin, full 68 *52-68-3031 Outer doorskin, lower 8” 67-68 52-67-31N.I. Door jamb vent grille w/o flap, univ 67-69 52-67-36N.I. Door jamb vent grille with flap and backing, univ 67-69 52-67-36A39 Rocker panel, factory type, USA made, 66”L 67-69 52-67-3940 Rocker w/extension, slip on style, 61”L 67-69 52-67-40N.I. Inner rocker, factory style 67-69 52-67-44N.I. Inner rocker assembly w/kick panel support 67-69 52-67-4549 Qtr. panel factory style, includes sail pnl. & dr. jamb pillar 67 *52-67-49N.I. Qtr. panel factory style, includes sail pnl. & dr. jamb pillar 68 *52-68-49N.I. Rear quarter, convertible, factory style 67 *52-67-4850 Rear quarter extends to crown 67-68 *52-67-50N.I. Upper rear wheel arch 11”Hx29”L 67-68 52-67-5255 Rear quarter, front sec, 11”H 67-68 52-67-5557 Rear quarter, rear sec, 12”H 67-68 52-67-5759 Tail light panel 67-68 52-67-5960 Rear bumper, chrome 67-68 52-67-60Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.18 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEV. CAMARO 1967-6862 65666969W7070A70B717273LH73RHapplications THat FIT:CHEVROLETREPLACEMENT SHEETMETALIndex# Description Year Mill Part#62 Inner rear valance 67-68 52-67-6265 Panel behind rear window 67-69 52-67-6566 Panel behind rear window, factory style 67-69 52-67-6669 Trunk lid 67-69 *52-67-6969B Trunk Latch mounting bracket 67-68 52-67-69B69W Trunk weatherstrip gutter, 3 pc set67-69 52-67-69W70 Floor pan half, 19”W x 55”L 67-69 52-67-7070A Floor pan full half, includes center seam, 82”L x 27”W 67-69 *52-67-70A70B Full floor pan w/center, one piece, 72”x 47” w/braces 67-69 *52-67-70B71 Floor pan front section, 27”L x 19”W 67-69 52-67-7172 Floor pan, rear half section, specify L or R 67-69 52-67-72N.I. Floor pan ‘X’ member brace, convertible 67-69 52-67-72AN.I. Seat frame support, coupe, specify L or R 67-69 52-67-72BN.I. Under rear seat brace, specify L or R 67-69 52-67-72D73 Toeboard 16”x19”, specify L or R 67-69 52-67-7374L Rear shock tower sec. LH, 8.5”Hx20”L 68-69 52-68-74L75 Outer rear wheelhouse, exc. conv 67-68 52-67-7576 Inner rear wheelhouse, Except LH side on 67 models 67-69 52-67-7676A Inner rear wheelhouse, LH side only on 1967 models 67 52-67-76A77 Floor pan under rear seat, specify L or R 67-69 52-67-7778 Trunk floor center, 29” x 37” 67-68 52-67-78N.I. Trunk floor complete, 61W x 47 Deep 67 *52-67-78A78A Trunk floor complete 68 *52-68-78A79 Trunk side filler panel 67-68 52-67-7980 Trunk floor side extension, 27” x 13” 67-68 52-67-8081 Rear frame rail extension 67-69 52-67-8182 Trunk floor reinforcement 67-69 52-67-82N.I. Inner trunk to tail pan brace, univ. (4 required) 67-68 52-67-83N.I. Floor pan drain hole cover, steel 67-69 52-67-86N.I. Front seat bracket 67-69 52-67-87N.I. Rear seat bracket 67-69 52-67-8891 Battery tray 67-69 52-67-9192 Battery retainer 67-81 53-65-9296 Front wheelwell moulding 67-68 52-67-9697 Rear wheelwell moulding 67 52-67-9798 Rear wheelwell moulding 68 52-68-987974L76 76A7881808296 97 9878A75779192WINDOW CRANK 380 383Index # Description Year Part No.380 Window crank handle w/black knob, universal 67-69 53-58-380383 Window crank handle w/clear knob, universal 67-69 53-58-383GAS TANKSGas Tank 67-68 52-67-110Gas tank straps, sold in pairs 67-69 52-67-115Gas tank mounting brace (2 required) 67-69 52-67-116WEATHERSTRIPMolded door seals, Hardtop and Convertible, pair 67 LM-22Molded door seals, Hardtops and Convertibles, pair 68-69 LM-22-ATop roof rail seals with header seal. 67-69 RR-1500Convertible only, 5 piece molded set. Includes all right and left side top rail seals,also has clips installed into header seal. Made with steel cores as per original.Roofrail weatherstrip w/molded ends, Hardtop, pair 67 52-67-101Conv. pillar post weatherstrip w/molded ends, pair 67 52-67-102Roofrail weatherstrip w/molded ends, Hardtop, pair 68-69 52-68-101Conv. pillar post weatherstrip w/molded ends, pair 68-69 52-68-102Trunk Seal Kit 67-81 TK-46-15DASH TOPSDT-214DashTop covers fitright over existing dash,makes your dash lookDT-215new againDescription Year Mill Part #Dashtop cover, fits Camaro 67 DT-214Dashtop cover, fits Camaro 68 DT-215All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com19

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEV. CAMARO 19697070A70Bapplications THat FIT:CHEVROLETREPLACEMENT SHEETMETALIndex# Description Year Mill Part#70 Floor pan half, 19”Wx55”L 67-69 52-67-7070A Floor pan full half, includes center seam, 82”L x 27”W 67-69 *52-67-70A70B Full floor pan with center, one piece, 72”x 47”67-69 *52-67-70Bincludes braces71 Floor pan front section, 27”L x 19”W 67-69 52-67-7172 Floor pan, rear half, specify L or R 67-69 52-67-72N.I. Floor pan ‘X’ member brace, convertible 67-69 52-67-72AN.I. Seat frame support, coupe, specify L or R 67-69 52-67-72BN.I. Under rear seat brace, specify L or R 67-69 52-67-72D73 Toeboard 16”x19” 67-69 52-67-7374L Rear shock tower sec. LH, 8.5”Hx20”L 68-69 52-68-74L75 Outer rear wheelhouse, exc. conv. 69 52-69-7576 Inner rear wheelhouse 67-69 52-67-7677 Floor pan under rear seat, specify L or R 67-69 52-67-7778 Trunk floor center, 29” x 37” 69 52-69-7879 Trunk floor outer sec, w/inner quarter 69 52-69-7981 Rear frame rail extension 67-69 52-67-8182 Trunk floor reinforcement 67-69 52-67-8285 Trunk floor brace 69 52-69-85N.I. Drain hole cover for floor pan, steel 67-69 52-67-86N.I. Front seat bracket, specify L or R 67-69 52-67-87N.I. Rear seat bracket, specify L or R 67-69 52-67-8891 Battery tray 67-69 52-67-9192 Battery retainer 67-81 53-65-9296 Front wheelwell moulding, specify L or R 69 52-69-9697 Rear wheelwell moulding, specify L or R 69 52-69-977174L72 73LH 73RH757776380 383WINDOW CRANK HANDLES380 Window crank handle w/black knob, universal 53-58-380383 Window crank handle w/clear knob, universal 53-58-383GAS TANKSGas tank with filler neck 69 *52-69-110Gas tank straps, sold in pairs 67-69 52-67-115Gas tank mounting brace (2 required) 67-69 52-67-116DASHTOPSDT-2368178 79919296978285DT-221Dashtop cover, fits Camaro without A/C 69 DT-236Dashtop cover, fits Camaro with A/C 69 DT-221WEATHERSTRIPMolded door seals, Hardtops & Convertibles, sold in pairs 68-69 LM-22-ATop roof rail seals with header seal. 67-69RR-1500 Convertible only, 5 piece molded set. Includes all right and left side top railseals, also has clips installed into header seal. Made with steel cores as per original.Roofrail weatherstrip w/molded ends, Hardtop, pair 68-69 52-68-101Conv. pillar post weatherstrip w/molded ends, pair 68-69 52-68-102Trunk Seal Kit 67-81 TK-46-15All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com21

applications THat FIT:CHEVROLETMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEV. CAMARO 1970-81666500010252-74-037152-78-03 52-80-03223169707225407569A52-70-49 LH5552-74-50 LH52-70-6052-70-50 LH52-78-62Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.22 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com4352-74-5752-70-61 52-74-6252-74-6052-70-57REPLACEMENT SHEETMETALIndex# Description Year Mill Part#00 Lower front valance, except RS 70-73 52-70-0001 Header panel, except RS 70-73 52-70-0102 Grille, silver/chrome, standard 70-71 52-70-02N.I. Grille, silver/chrome, standard 72-73 52-72-02N.I. Grille upper, gray 80-81 52-80-0203 Grille, black, fits RS/Z28 74-77 52-74-0303 Grille, black, fits RS/Z28 78-79 52-78-0303 Grille, black, fits Z28 80-81 52-80-0322 Front fender lower rear sec, 15”H 70-81 52-70-2225 Front outer wheelhouse 70-81 52-70-2531 Doorskin, lower, 7”H 70-81 52-70-3140 Rocker w/lower quarter extension 70-81 52-70-4043 Rocker panel, factory style 70-73 52-70-4349 Rear quarter, factory style, w/sail panel & door pillar 70-73 *52-70-4950 Rear quarter, up to crown line 70-73 *52-70-5050 Rear quarter, up to crown line 74-81 *52-74-5055 Rear quarter lower front sec, 17”H 70-81 52-70-5557 Rear quarter, rear sec, 15”H 70-73 52-70-5757 Rear quarter, rear sec, 15”H 74-81 52-74-5760 Rear valance, lower sec 70-73 52-70-6060 Rear valance, lower sec 74-77 52-74-6061 Tail light panel 70-73 52-70-6162 Tail light panel 74-77 52-74-6262 Tail light panel 78-81 52-78-6265 Trunk lid 70-81 *52-70-6566 Rear deck filler panel (between window & trunk lid) 70-81 52-70-6669 Floor pan half, full length, 57”L x 21”W 70-74 52-70-6969A Floor pan half with center hump, 77”L x 27”W70-74 *52-70-69Awill fit 75-81 if modify for catalytic converter brace. Made in USA70 Floor pan half without center hump, 49”L x 21”W 75-81 52-70-7071 Front floor pan half section, 23”L x 18”W 70-76 52-70-7172 Rear floor pan half section, 26”L x 18”W 70-76 52-70-7275 Outer rear wheelhouse 70-81 52-70-75All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

applications THat FIT:CHEVROLETCHEV. CAMARO 1993 - 0240REPLACEMENT PANELSIndex# Description Year Mill Part#N.I. Rocker panel 93-02 52-93-40WEATHERSTRIPDoor Belt Weatherstrip, 4pc. kit of inner/outer, L & R 93-02 52-93-101CHEV. CAVALIER 1982 - 94ALSO FITS:BUICK SKYHAWK 82-89;PONTIAC SUNBIRD, J 2000 82-94;OLDS FIRENZA, CADILLAC CIMARRON 82-88Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEV. CAVALIER cont. 82 - 94GAS TANKSDescription Year Mill Part#Gas tank w/fuel injection 82-91 35-82-110Gas tank w/o fuel injection 82-87 35-82-111Gas tank 92-94 35-92-111DOOR & WINDOW CRANK HANDLESOutside door handle, Black 82-94 93-82-386Outside door handle, Chrome 82-94 93-82-387Inside door handle, chrome 82-90 35-82-382WEATHERSTRIPN.I. Weatherstrip, front door, 1 piece, fits L or R 82-94 60-82-96CHEV. CAVALIER 95 - 05ALSO FITS: PONTIAC SUNFIRE41REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Upper tie bar 95-05 35-95-01N.I. Lower tie bar 95-05 35-95-02N.I. Doorskin, 2DR, cut for 4DR, 9” x 54” 95-05 35-95-3141 Rocker, 2DR, w/extension, 55” L 95-05 35-95-41N.I. Rocker, 4DR, 69”L 95-05 35-95-42N.I. Rear quarter, lower front section, 5”H x 16”L 95-05 35-95-5441CHEV. CELEBRITY 82 - 90ALSO FITS:PONTIAC 6000 1982-9142REPLACEMENT SHEETMETALIndex# Description Year Mill Part#06 Front impact bar 88-90 35-88-0607 Front impact bar 91-94 35-91-0709 Front bumper cover, w/o Z-24, painted 91-94 *35-91-0933 Doorskin, 4DR front, lower 9” 82-94 35-82-3335 Doorksin, 4DR rear, lower 82-94 35-82-3541 Rocker, 2DR, w/extension, see 82-87 for photo 82-94 35-82-4142 Rocker, 4DR, see 82-87 for photo 82-94 35-82-4260 Rear impact bar, coupe/conv./sedan 88-90 35-88-60and 88-94 Z-2461 Rear impact bar, coupe/conv./sedan, exc Z-24 91-94 35-91-6165 Rear bumper cover, exc Z-24 & wagon, painted 91-94 *35-91-6591 Combination headlamp assembly 91-94 35-91-9142REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Doorskin, 4DR, front, 8”Hx42”L, specify L or R 82-90 351-82-3142 Rocker, 4DR, 74”L, specify L or R 82-90 801-82-42Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.24 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128Fax this form Toll-Free: 1-888-781-2700Call Toll-Free: 1-800-888-5072Order On-line: www.millsupply.comMail to: Mill Supply, Inc., PO BOX 28400, Cleveland, OH 44128Date: _________________________________________Purchaser Address: (please print)MILL SUPPLY ORDER FORMShip to Address: (if different) (please print)Your NameDaytime PhoneFaxYour NameCompany NameAddress (Mail to)Company NameAddress (Ship to)City State ZipCity State ZipDaytime PhoneFaxORDERING/SHIPPING INFORMATIONWe ship UPS or Fedex Ground unless you specify otherwise.(minimum $7.50 with prepaid orders). Orders that are notprepaid by check will be charged the actual shipping charge.We accept Visa, MasterCard, Discover Card, AmericanExpress or check-by-phone, check or money order. Thereis a $20.00 charge on uncollected checks. By prepayingorders you save the $7.50 COD collection fee. Shippingby freight and shipping out of the continental U.S. is moreexpensive, please call for a price quote. Foreign ordersmust be prepaid in U.S. funds. We will quote shipping afterwe know size, weight, and value of shipment.DAMAGE IN TRANSIT and FREIGHT DISCLAIMER: MillSupply will pack your parts carefully. If damage is discoveredupon opening your order we must be notified within24 hours of delivery, excluding holidays and weekends.Retain all shipping material and contents until the damageissue is resolved. Mill Supply is not responsible for damagedmerchandise that can not be properly examined bythe claims inspector. Multiple package shipments may notarrive on the same day.RETURN POLICY: Call before returning any parts. Returnedgoods are subject to a 10% restocking charge and mayonly be returned within 30 days of purchase. Upon yourinstructions, we will issue a refund check or refund yourcredit card. No returns on special order items.GUARANTEE: Mill Supply’s guarantee is equal to or betterthan what each manufacturer furnishes. In no case isit greater than the cost of the merchandise. Prices aresubject to change without notice.Quantity Part No. Description Sub Total Total(Ohio residents insert your local sales tax here.Use 7-3/4% if you do not know your local rate.)Packages that are too large for UPS must beshipped freight, call for a quote before you order.Oversize packages (ie: wheelhouses, fenders, quarters)Method of Payment:that can still be sent UPS may run up to 40% for shipping,Send C.O.D. (established customers only)call if you would like a quote on shipping.Check or Money Order EnclosedCharge to my: Visa ® American Express ® MasterCard ® Discover ® (Circle one)Please include credit card number, expiration date, security code and signature with charge orders.Sub TotalOhio Sales TaxAdd 10% U.P.S. Shipping15% West of Mississippi (minimum $7.50)TotalThank you for your order.All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied thatCustomeranySignaturepart listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.CODE:SB11Expiration Date 3 Digit Security Code(last 3 digits on signature strip)Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com25

applications THat FIT:CHEVROLETMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEV. CHEVELLE & MALIBU 64-6764-6555-67-060707A66-67233940420155-64-500255-65-6055-65-0355-64-66 55-66-6655-66-0355-66-6855-67-0355-67-68Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.26 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEV. CHEVELLE & MALIBU 64-6772A55-64-8084797555-66-80REPLACEMENT SHEETMETALIndex# Description Year Mill Part#00 Front filler panel 66 55-66-0000 Front filler panel 67 55-67-0001 Radiator Support 66 *55-66-0102 Radiator Support 67 *55-67-0203 Front bumper, chrome 65 55-65-0303 Front bumper, chrome 66 55-66-0303 Front bumper, chrome 67 55-67-0307 4-Speed Tunnel Cover, w/o console 64-67 55-64-0707A 4-Speed Tunnel Cover with console 64-67 55-64-07A08 Hood Scoop insert, 4-pc set, SS-396 models, 66 55-66-08(includes 2 painted ornaments & 2 chrome inserts for one hood)09 Hood Scoop inserts, 2 pc set, SS-396 models 67 55-67-09(includes 2 chrome/black inserts for one hood)N.I. Engine mounts (2), fits 396/427 big blocks 64-67 55-64-1213 Dash top, metal 66-67 55-66-1314 Dash top reinforcement 66-67 55-66-14N.I. Front fender 65 *55-65-20N.I. Front fender 67 *55-67-2021 Front fender lower rear section, 14”H 64-65 55-64-2121 Front fender lower rear sec, 14”H 66-67 55-66-2122 Inner front fender brace, rear 66-67 55-66-2223 Inner front fender, (wheelhouse) 67 55-67-2330 Doorskin, full, 2DR hardtop & convertible 66-67 *55-66-3031 Lower doorskin, 2 Door 66-67 55-66-3139 Rocker panel, 2DR, factory style 64-67 55-64-3940 Rocker panel, 2 Door 64-67 55-64-4042 Rocker panel, 4 Door 64-67 55-64-42N.I. Inner rocker panel 64-67 55-64-45N.I. Seat mount inner bracket 64-65 55-64-4649 Rear quarter panel, complete, 2DR Hardtop 65 *55-65-4949 Quarter panel, factory style with sail panel 66-67 *55-66-4950 Stamped rear quarter, 2DR, 28”Hx83”L 64-65 *55-64-5050 Stamped rear quarter, 2DR 66-67 *55-66-50DashTop covers fitright over existingdash, makes yourdash look new againapplications THat FIT:CHEVROLETREPLACEMENT SHEETMETALIndex# Description Year Mill Part#60 Rear bumper, chrome 65 55-65-6061 Rear bumper, chrome, exc. sta. wagon & El Camino 67 55-67-6165 Rear window to trunk panel, 2DR only 64-65 55-64-6565 Rear window to trunk panel, hardtop only 66-67 55-66-6566 Outer rear wheelhouse, cut gas filler hole on LH 64-65 55-64-66for wagon, modify top for convertible66 Outer rear wheelhouse, cut gas filler hole on LH 66-67 55-66-66for wagon, modify top for convertible67 Inner rear wheelhouse, except wagon & convertible 64-67 55-64-6768 Tailpan 66 55-66-6868 Tailpan 67 55-67-6870 Floor pan half, full length, 62”L x 28”W 64-67 55-64-7071 Front floor pan, 31”L x 28”W 64-67 55-64-7172 Rear floor pan, 31”L x 28”W 64-67 55-64-7272A Floor pan under rear seat, 30L x 25”W 64-67 55-64-72A73 Trunk floor center, 39”L x 20”W 64-67 55-64-7374 Trunk floor side, 38”L x 24”W 64-67 55-64-7475 Trunk floor brace 64-67 55-64-7576 Floor to firewall extension, 17”L x 24”W, L or R 64-72 55-64-7677 Front floor brace, rocker to rocker 64-72 55-64-7778 Middle floor brace, rocker to rocker 64-72 55-64-7879 Rear floor brace, rocker to rocker 64-67 55-64-7980 Trunk filler, inner lower rear quarter section 64-65 55-64-8080 Trunk filler, inner lower rear quarter section 66-67 55-66-80N.I. Trunk floor front cross member 64-65 55-64-81N.I. Rear cross bar 64-65 55-64-8283 Front floor brace, partial outer section, L or R 64-72 55-64-8384 Middle floor brace, partial outer section, L or R 64-72 55-64-8491 Battery tray 64-65 55-64-9191 Battery tray 66 52-67-9191 Battery tray 67 53-67-91N.I. Battery tray retainer, 6 cylinder 66-67 53-65-92WINDOW CRANKWindow crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383GAS TANKSN.I. Gas tank, w/filler neck, except station wagon 64-67 *55-64-110N.I. Gas tank,w/filler neck, station wagon 64-67 *55-64-111N.I. Gas tank straps, set 64-67 55-64-115WEATHERSTRIPDoor Weatherstrip, Hardtop and Convertible, R & L 64-65 LM-12CDoor Weatherstrip, 2-Door Sedans Only, R & L 64-65 LM-12DDoor Weatherstrip, 2-Door Hardtops and Conv., R & L 66-67 LM-12Roof Rail Seal, 2-Door Hardtops Only, R & L 64-65 RR-5000(Also fits El Camino)Roof Rail Seal, 2-Door Hardtops Only, R & L 66-67 RR-5001Convertible Roof Rail Seals, 7 Piece Set 66-67 RR-1609Includes all right and left side top rail seals, plus thewind shield top header seal. Made with steel cores.Trunk Seal Kit 64-72 TK-46-16DASH TOPSDT-238DT-239DT-217Description Year Mill Part #Dashtop, that fits Chevelle 64-65 DT-238Dashtop, that fits Chevelle 66 DT-239Dashtop, that fits Chevelle 67 DT-217All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com27

applications THat FIT:CHEVROLETMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEV. CHEVELLE & MALIBU 68-6940004255-68-0155-69-0155-68-5003092261623065Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.28 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEV. CHEVELLE & MALIBU 68-6972A 7483777878AREPLACEMENT SHEETMETALIndex# Description Year Mill Part#00 Radiator support 68-69 *55-68-0001 Front filler panel 68 55-68-0101 Front filler panel (w/o grille brackets) 69 55-69-0102 Front bumper, chrome 68 55-68-0202 Front bumper, chrome 69 55-69-0203 Header panel 68-69 55-68-0307 4-Speed shift hump w/o console 68-69 55-68-0708 4-Speed shift hump w/console 68-69 55-68-0809 Hood Scoop inserts, 2 pc set, SS-396 models 68-69 55-68-09(includes 2 chrome/black inserts for one hood)N.I. Engine Mount, with V8 68-69 55-68-12N.I. Armrest, black plastic, paint to match 68-69 53-68-14N.I. Armrest base mouldings, stainless steel, one pair 68-69 53-68-1719 Inner front fender section below battery tray 68-69 55-68-19N.I. Front fender 68 *55-68-20N.I. Front fender 69 *55-69-2021 Front fender lower rear sec, 17”H 68-69 55-68-2122 Front inner fender brace 68-69 55-68-2225 Inner front fender (front wheelhouse) 68-72 55-68-2530 Doorskin, full outer, Hardtop/Convertible 69 *55-69-30(will fit 1968 if top rail is used off original 1968 door31 Lower doorskin, 2 Door, 7”H 68-69 55-68-3139 Rocker panel, 2DR, factory style, made in USA 68-72 55-68-3940 Rocker panel, 2DR, slip over style 68-72 55-68-4042 Rocker panel, 4DR, slip over style 68-72 55-64-42N.I. Inner rocker panel, 2 DR, except El Camino 68-69 55-68-45N.I. Rear quarter panel, with full sail panel 68 *55-68-492DR hard top, factory styleN.I. Rear quarter panel, with full sail panel 69 *55-69-492DR hard top, factory style50 Rear quarter panel, up to crown line, 2DR, 25”Hx75”L 68 *55-68-50N.I. Rear quarter panel, up to crown line, 2DR, 25”Hx75”L 69 *55-69-5084REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Quarter panel extension, except Sta. Wgn. & El Camino 68 55-68-55N.I. Quarter panel extension, except Sta. Wgn. & El Camino 69 55-69-5558 Rear quarter lower rear sec, 9”Hx29”L 68 55-68-5860 Rear bumper, chrome, exc S.W. 68 55-68-6060A Rear bumper, chrome, fits Station Wagon 68 55-68-60A60 Rear bumper, chrome, exc S.W. 69 55-69-6061 Tail panel 68 55-68-6162 Tail panel 69 55-69-6265 Panel behind rear window to trunk, 2DR 68-72 55-68-6567 Outer rear wheelhouse, exc. wgn. & conv; specify L or R 68-69 55-68-6768 Inner rear wheelhouse, exc. wgn. & conv; specify L or R 68-69 55-68-6870 Floor pan half, 63”L x 31”W, specify L or R 68-72 *55-68-70N.I. Full floor pan, 1 piece design, w/3 braces attached 68-72 *55-68-70A71 Front floor pan, specify L or R 68-72 55-64-7172 Rear floor pan, specify L or R 68-72 55-64-7272A Floor pan under rear seat, rocker to rocker, 58”W x 21”L 68-72 55-68-72A73 Trunk floor center 68-72 55-68-7374 Trunk floor side 68-72 55-68-7475 Trunk floor brace 68-72 55-68-7576 Floor to firewall extension 64-72 55-64-7677 Front floor brace, full 64-72 55-64-7778 Middle floor brace, full 64-72 55-64-7878A Rear floor brace, full 68-72 55-68-78A79 Trunk side filler panel 68 55-68-79N.I. Trunk side filler panel, only LH available 69 55-69-7980 Trunk floor, large one piece design 34”L x 56”W 68-72 *55-68-80N.I. Toolwell, Station Wagon only 68-72 55-68-8183 Front floor brace, partial outer section, specify L or R 64-72 55-64-8384 Middle floor brace, partial outer section, specify L or R 64-72 55-64-84N.I. Fuel tank mounting brace 68-69 55-68-85N.I. Front cross member for trunk floor 68-69 55-68-86N.I. Rear cross bar 68-69 55-68-8791 Battery tray 68-72 53-68-91N.I. Battery retainer 68-72 53-65-9296 Wheel opening moulding, front 69 55-69-9697 Wheel opening moulding, rear 69 55-69-97WINDOW CRANKWindow crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383GAS TANKSN.I. Gas tank,w/filler neck, except S/W 68-69 *55-68-110N.I. Straps for gas tanks, set 68-69 55-68-115WEATHERSTRIPDoor seals, Hardtop and Convertible, sold in pairs 68 LM-12BDoor seals, 2-Door Hardtop and Convertible, sold in pairs 69-72 LM-12ARoof rail seals, Convertible only, 7 Piece Set. Includes 68-72 RR-1610all right and left side top rail seals, plus the windshieldtop sponge seal. Incorporates all original details.Roof rail seals, 2-Door Hardtop, sold in pars 68 RR-5002Roof rail seals, 2-Door Hardtops Only, sold in pairs 69-72 RR-5003Trunk Seal Kit 64-72 TK-46-16DASH TOPSDashTop covers fit right over existingdash, makes your dash look new againapplications THat FIT:CHEVROLETDescription Year Mill Part #Dashtop, fits Chevelle, Malibu 68-69 DT-219All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com29

applications THat FIT:CHEVROLETMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEV. CHEVELLE & MALIBU 70-7203041855-70-05064272A78AREPLACEMENT SHEETMETALIndex# Description Year Mill Part#00 Front bumper, chrome 70 55-70-0000 Front bumper, chrome 71-72 55-71-00N.I. Headlight bezel set 71 55-71-02A03 Grille 72 55-72-0304 Grille with mouldings 72 55-72-0405 Radiator support 70 *55-70-05N.I. Radiator support 71-72 *55-71-0506 Front filler panel, between bumper and grille 70 55-70-0607 4-Speed shift hump w/o console 68-72 55-68-0708 4-Speed shift hump w/console 68-72 55-68-08N.I. Engine Mount, with V8 70-72 55-68-12N.I. Armrest, black plastic, paint to match 70-72 53-68-14N.I. Armrest base mouldings, stainless steel, one pair 70-72 53-68-1718 Front fender tie bar 70-72 55-70-1819 Inner fender panel below battery tray 68-72 55-68-1920 Front fender, except S.W. & El Camino 70 *55-70-20N.I. Front fender, Station Wagon & El Camino 70 *55-70-20A20 Front fender, except S.W & El Camino 71-72 *55-71-20N.I. Front fender, Station Wagon & El Camino 71-72 *55-71-20A22 Front fender lower rear sec, 15”H 70-72 55-70-2225 Front wheelhouse 68-72 55-68-2530 Doorskin, 7”H 70-72 55-70-3031 Doorskin, outer, full height, hardtop & conv. 70-72 *55-70-3134 Door Shell, 2DR Hardtop and Convertible 70-72 *55-70-34Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.30 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com7984Index# Description Year Mill Part#N.I. Rocker panel, 2DR, factory style, made in USA 68-72 55-68-3940 Rocker panel, 2DR 68-72 55-68-4042 Rocker panel, 4DR 68-72 55-64-42N.I. Inner rocker panel, 2DR, except El Camino 68-72 55-68-4547 Rear quarter panel, factory style, 2 DR Hardtop 70-72 *55-70-47with full sail panel49 Rear quarter, 2DR, 27”H, Hardtop only 70-72 *55-70-4950 Rear quarter 2DR, lower half, 20”H, Hardtop or Conv. 70-72 *55-70-50(extra metal is added to the top of this panel for strengthening purposeswhile in transit, this metal will need to be trimmed off)54 Rear quarter front sec, 20”Hx24”L 70-72 55-70-5456 Rear quarter rear sec, 20”Hx53”L 70-72 55-70-5657 Rear quarter lower rear sec, 8”H 70-72 55-70-5760 Rear bumper, chrome, Exc station wagon 70 55-70-6060 Rear bumper, chrome, Exc station wagon 71-72 55-71-60N.I. Rear valance panel 70 55-70-61N.I. Rear valance panel 71-72 55-71-61N.I. Tail panel, except Station Wagon 70-72 55-70-6265 Panel behind rear window, 2 DR Sedan & Hardtop 68-72 55-68-6567 Outer rear wheel house 70-72 55-70-6768 Inner rear wheelhouse, full, exc Wagon and Conv. 70-72 55-68-6870 Floor pan half, specify L or R 68-72 *55-68-70N.I. Full floor pan, 1 piece design, w/3 braces attached 68-72 *55-68-70A71 Front floor pan, 31”L x 28”W, specify L or R 68-72 55-64-7172 Rear floor pan, 31”L x 28”W, specify L or R 68-72 55-64-7272A Floor pan under rear seat, rocker to rocker, 58”W x 21”L 68-72 55-68-72A73 Trunk floor center 68-72 55-68-7374 Trunk floor side 68-72 55-68-7475 Trunk floor brace 68-72 55-68-7576 Floor to firewall extension (toe board), 17”Lx24”W 64-72 55-64-7677 Front floor brace 64-72 55-64-7778 Middle floor brace 64-72 55-64-7878A Rear floor brace, full 68-72 55-68-78A79 Trunk floor filler panel 70-72 55-70-79N.I. Trunk floor, Large one piece design, 39”L x 56”W 68-72 *55-68-80N.I. Toolwell, Station Wagon only 68-72 55-68-8183 Front floor brace, partial outer sect., specify L or R 64-72 55-64-8384 Middle floor brace, partial outer sect., specify L or R 64-72 55-64-8491 Battery tray 68-72 53-68-9192 Battery retainer 68-72 53-65-92N.I. Wheel opening moulding, front 70-72 55-70-96N.I. Wheel opening moulding, rear 70-72 55-70-97WINDOW CRANKWindow crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383GAS TANKSN.I. Gas tank, exc. S/W, w/o filler neck 70 55-70-110N.I. Gas tank, w/evap. emiss. cont. & filler neck, exc. s/w 70-72 *55-70-111N.I. Gas tank straps, set 70-72 55-68-115N.I. Gas tank mounting brace, priced each 70-72 55-68-85WEATHERSTRIPDoor seal, 2-Door Hardtops and Convertibles, R & L 69-72 LM-12-ARoof rail seal, Convertible Only, 7 Piece Set. Includes 68-72 RR-1610all right and left side top rail seals, plus the windshieldtop sponge seal. Incorporates all original details.Roof rail seal, 2 Door Hardtops, R & L (also fits El Camino) 69-72 RR-5003Trunk Seal Kit 64-72 TK-46-16DASH TOPSDashTop covers fit right overexisting dash, makes yourDT-225dash look new againDescription Year Mill Part #Dashtop, fits Chevelle, Malibu with center speaker 70-72 DT-225Dashtop, fits Chevelle, Malibu w/side speakers 70-72 DT-226All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEV. CHEVELLE & MALIBU 73-77applications THat FIT:CHEVROLETCHEV. MALIBU 78-83ALSO FITS: PONTIAC LEMANS/GRAND AM 78-81& BONNEVILLE 82-86REPLACEMENT SHEETMETALIndex# Description Year Mill Part#31 Doorskin, lower outer 10”, specify L or R 73-77 55-73-3140 Rocker panel, 2DR, 57”L (Exc. ElCamino) 73-77 55-73-4050 Rear quarter 2DR, 32”Hx72”L (not for SS) 73-77 *55-73-5071 Front floor pan, specify L or R 73-77 55-73-7172 Rear floor pan, specify L or R 73-77 55-73-7273 Trunk floor center 73-77 55-73-7374 Trunk floor sides, specify L or R 73-77 55-73-7479 Trunk filler panel, specify L or R 73-77 55-73-79N.I. Battery retainer 73-77 53-65-92REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Grille, Exc. Super Sport models. Malibu 79 55-79-03N.I. Grille, Malibu 81 55-81-03N.I. Grille, Malibu 82-83 55-82-03N.I. Hood latch 81-88 50-73-13N.I. Fender, Malibu, specify L or R 78-81 *55-78-20N.I Doorskin, full, 2DR; specify L or R 78-85 *55-78-30N.I. Doorshell, 2DR; specify L or R 78-85 *55-78-3440 Rocker panel, 2DR 78-86 55-78-4050 Quarter panel skin, Malibu 2DR, specify L or R 78-83 *55-78-5070 Floor pan half, 25” x 65”, specify L or R 78-86 *55-78-70N.I. Battery hold down bracket 78-83 55-78-98N.I. Battery tray 78-83 55-78-99WINDOW CRANKWindow crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383AGAS TANKSA Gas tank, with filler neck 73-77 *55-73-110N.I. Gas tank, w/o filler neck 73-77 55-73-111N.I. Fuel tank mounting brace, holds straps in place 73-77 55-73-85N.I. Straps for gas tank, set 73-77 55-73-115GAS TANKSA Gas tank w/filler neck, fits Malibu, exc. S/W 78-83 *55-78-110N.I. Gas tank w/o filler neck, fits Malibu exc S/W 78-83 55-78-111N.I. Gas tank straps, set 78-83 55-78-115DOOR & WINDOW HANDLESInside door handle, Chrome, fits Malibu only 78-83 55-78-380Outside door handle, Chrome 78-87 55-78-381Window crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383DASH TOPSDT-209ADT-234DASH TOPSDashTop covers fitright over existingDT-204dash, makes yourdash look new againDT-220Description Year Mill Part #Dashtop, fits Chevelle, Malibu with A/C 73-77 DT-204Dashtop, fits Chevelle, Malibu without A/C 73-77 DT-220CHEV. MALIBU 97-0359REPLACEMENT SHEETMETALIndex# Description Year Mill Part#59 Gas tank door area 97-03 55-97-59All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.DT-288PLRDT-288A/CDashTop covers fit right over existing dash, makes your dash look new again.Description Year Mill Part #Dashtop, fits Malibu, Sprint, El Camino w/ctr speaker 78-80 DT-209Dashtop, fits Malibu, Sprint, El Camino w/side speakers 78-80 DT-210Dashtop, fits Malibu, El Camino with outside speakers 81-88 DT-234Lower Door panels, no power, sold in pairs only 78-87 DT-288ALower Door panels, power locks, sold in pairs only 78-87 DT-288CPadded Arm rests, sold in pairs only78-87 DT-288-PLRCHEV. CORSICA/PONTIAC TEMPEST* 87-96REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Front fender, specify L or R 87-96 *173-87-20N.I. Rocker panel, 4DR; specify L or R 87-96 173-87-42*Pontiac Tempest - Canada onlySpecify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com31

applications THat FIT:CHEVROLETCHEV. EL CAMINO 59-67Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEV. EL CAMINO 68-72REPLACEMENT SHEETMETALIndex Description Year Mill Part#N.I. Front bumper, chrome 65 55-65-03N.I. Front bumper, chrome 66 55-66-03N.I. Front bumper, chrome 67 55-67-03N.I. 4-Speed Tunnel Cover, w/o console 64-67 55-64-07N.I. 4-Speed Tunnel Cover with console 64-67 55-64-07AN.I. Engine mounts (2), fits 369/427 Big Blocks 64-67 55-64-1221 Front fender, lower rear sec, 14”H 64-65 55-64-2140 Rocker panel 59-60 53-59-4040 Rocker panel 66-67 55-64-40N.I. Rocker panel with extension 59-60 53-59-43N.I. Seat mount inner brackets (2) 64-65 55-64-4650 Quarter panel skin, stamped, exact fit for 1966 66 *58-66-50modify tail lamp area for 196754 Rear quarter front sec, 16”Hx37”L 59 53-59-5454 Rear quarter front sec, 25”Hx39”L 60 53-60-54N.I. Rear bumper, chrome 65 55-65-6060 Outer tailgate skin 64-66 58-64-60N.I. Outer rear wheelhouse, cut gas filler hole on LH 64-65 55-64-66N.I. Outer rear wheelhouse, cut gas filler hole on LH 66-67 55-66-6667 Upper tailgate section, 10” 59 53-59-6768 Tailgate lower section, 4” 59 53-59-6871 Front floor pan half 64-72 55-64-7172 Front floor pan half 59-60 53-59-7283 Front floor support outer section 64-72 55-64-8386 Floor pan drain hole coverlet, steel 64-69 52-67-8691 Battery tray 67 53-67-91N.I. Battery hold down bracket 66-67 53-65-92WINDOW CRANK HANDLEWindow crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383WEATHERSTRIPMolded door seals, R & L, one pair 64-65 LM-12-DRoof rail seals, R & L, one pair 64-65 RR-5000GAS TANK111 Gas tank, with filler neck 64-67 55-64-111N.I. Straps for gas tank, set 64-67 55-64-115REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Front bumper, chrome 68 55-68-02N.I. Front bumper, chrome 69 55-69-02N.I. Front bumper, chrome 71-72 55-71-00N.I. Front filler panel 68 55-68-01N.I. Front filler panel (w/o grille brackets) 69 55-69-01N.I. Headlight bezel set, one pair 71 55-71-02AN.I. Header panel 68-69 55-68-03N.I. Grille with moulding 72 55-72-04N.I. Radiator support 70 55-70-05N.I. Radiator support 71-72 55-71-05N.I. Front filler panel, between bumper & grille 70 55-70-0607 4-Speed shift hump w/o console 68-72 55-68-0708 4-Speed shift hump w/console 68-72 55-68-08N.I. Hood Scoop inserts, 2 pc set, SS-396 models 68-69 55-68-09(includes 2 chrome/black inserts for one hood)N.I. Engine Mount, with V8 68-69 55-68-12N.I. Armrest, black plastic, paint to match 68-69 53-68-14N.I. Armrest base mouldings, stainless steel, one pair 68-69 53-68-17N.I. Front fender tie bar 70-72 55-70-1820 Front fender, El Camino 70 *55-70-20A20 Front fender, El Camino 71-72 *55-71-20A21 Front fender lower rear sec, 17”H 68-69 55-68-21N.I. Front inner fender brace 68-69 55-68-22N.I. Inner front fender (wheelhouse) 68-72 55-68-25N.I. Full outer doorskin 68-72 58-68-3031 Lower doorskin 68-69 55-68-31N.I. Rocker panel, 2DR, factory style 68-72 55-68-3940 Rocker panel 68-69 55-68-4050 Rear quarter panel skin 68-72 *58-68-5058 Rear quarter lower rear sec, 10”H 68-72 58-68-5860A Rear bumper, chrome 68-72 55-68-60A67 Outer rear wheelhouse 68-72 55-68-6771 Front floor pan 68-72 55-64-71N.I. Floor to firewall extension (toe board), 17”Lx24”W 68-72 55-64-7276 Bed floor, full half, 35” x 77” 68-72 *58-64-76N.I. Bed floor section, 22” x 48”L 68-72 58-68-77N.I. Front floor brace 68-72 55-64-77N.I. Middle floor brace 68-72 55-64-78N.I. Rear floor brace, full 68-72 55-68-78AN.I. Front floor brace, partial outer section only, specify L or R 68-72 55-64-83N.I. Middle floor brace, partial outer section, specify L or R 64-72 55-64-84N.I. Floor pan drain hole cover, steel 68-69 52-67-8691 Battery tray 68-72 53-68-91N.I. Battery retainer 68-72 53-65-9296 Wheel opening moulding, front 69 55-69-9696 Wheel opening moulding, front 70-72 55-70-9697 Wheel opening moulding, rear 69 55-69-9797 Wheel opening moulding, rear 70-72 55-70-97Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.32 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128WINDOW CRANKWindow crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383GAS TANKSGas tank, w/o filler neck, w/o Evap .emiss .cont 68-70 58-68-110Gas tank , w/o filler neck, w/evap, emiss. cont. 70-72 58-70-111Straps for gas tanks, set 68-72 55-68-115applications THat FIT:CHEVROLETEL CAMINO/CABALLERO 78-87WEATHERSTRIPMolded door seals, R & L, one pair 58 LM-12-BMolded roof rail seals, Fits El Camino, R & L 68-72 RR-5003DASH TOPSDashTop covers fitright over existing dash,makes your dash looknew againDT-219DT-225DT-226Description Year Mill Part #Dash top 68-69 DT-219Dash top with center speaker 70-72 DT-225Dash top with outside speakers 70-72 DT-226CHEV. EL CAMINO 73-77REPLACEMENT SHEETMETALIndex# Description Year Mill Part#31 Doorskin, lower outer 10”, specify L or R 73-77 55-73-3150 Rear quarter panel, 32” 73-77 *58-73-5071 Front floor pan, specify LH or RH 73-77 55-73-71N.I. Battery retainer 73-77 53-65-92GAS TANKSGas tank, fits El Camino, 26 gal, with filler neck 73-77 58-73-110Gas tank, fits El Camino, 26 gal, without filler neck 73-77 58-73-11150REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Grille, except Super Sport models 79 55-79-03N.I. Grille 81 55-81-03N.I. Grille 82-87 55-82-03N.I. Front fender 78-87 *55-78-20N.I. Full outer doorskin 78-85 *55-78-30N.I. Full outer doorskin 86-87 *58-86-30N.I. Doorshell 78-85 *55-78-34N.I. Doorshell 86-87 *58-86-3440 Rocker panel 78-87 55-78-40N.I. Front bed wall 78-87 58-78-46N.I. Inner side bed panel, complete 78-87 *58-78-47N.I. Quarter panel, factory style 78-87 *58-78-4950 Quarter panel skin, 30” x 83” 78-87 *58-78-50N.I. Rear quarter, lower front section, 16”H x 27”L 78-87 58-78-54N.I. Rear quarter, lower rear section, 13”H x 37”L 78-87 58-78-56N.I. Tailgate shell 78-87 58-78-61N.I. Outer rear wheelhouse 78-87 58-78-75N.I. Bed floor complete 78-87 *58-78-77N.I. Rear license plate bracket 78-87 58-78-92N.I. Battery retainer bracket 78-87 55-78-98N.I. Battery tray 78-87 55-78-99DOOR & WINDOW HANDLESInside door handle, Chrome, fits Malibu only 78-87 55-78-380Outside door handle, Chrome 78-87 55-78-381Window crank handle w/black knob, universal 78-87 53-58-380Window crank handle w/clear knob, universal 78-87 53-58-383112GAS TANKS112 Gas tank, fits El Camino, 22 gal., w/8fill neck w/o fuel inj. 78-87 *58-78-112N.I. Gas tank, fits El Camino, 22 gal. w/o fill neck w/o fuel inj. 78-87 58-78-113N.I. Gas tank, fits El Camino, 22 gal w/filler neck w/fuel inj. 85-87 *58-85-115N.I. Straps for 58-78-112, 58-85-115, set 78-87 58-78-117DASHTOPSDashTop covers fitright over existingdash, makes yourdash look new againDT-204DT-220DASHTOPSDashTop covers fitright over existingdash, makes yourdash look new again.DT-209DT-234Description Year Mill Part #Dash top, fits El Camino with A/C 73-77 DT-204Dash top, fits El Camino without A/C 73-77 DT-220Description Year Mill Part #Dashtop, fits Malibu, Sprint, El Camino with center speaker 78-80 DT-209Dashtop, fits Malibu, Sprint, El Camino with side speakers 78-80 DT-210Dashtop, fits Malibu, El Camino with outside speakers 81-88 DT-234All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com33

applications THat FIT:CHEVROLETCHEV. MONTE CARLO 1970-72Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEV. MONTE CARLO 1973-7772AREPLACEMENT SHEETMETALIndex # Description Year Mill Part#N.I. 4-Speed shift hump, w/o console 70-72 55-68-07N.I. Engine mount, V8 70-72 55-68-12N.I. Armrest base, black plastic, paint to match 70-72 53-68-14N.I. Armrest base moulding. S.S. pair 70-72 53-68-1721 Front fender lower rear sec, 17”H 70-72 59-70-2139 Rocker panel, 2DR, factory style, made in USA 70-72 55-68-3940 Rocker panel, 2DR 70-72 55-68-4049 Rear quarter panel, up to crown line 70-72 *59-70-49N.I. Deck lid 70-72 *59-70-57N.I. Rear bumper, chrome 70-72 59-70-6065 Panel behind rear window, 2DR 70-72 55-68-6570 Floor pan half, 63”L x 31”W, specify L or R 70-72 *55-68-70N.I. Full floor pan, 1 piece design, w/3 braces attached 70-72 *55-68-70A71 Front floor pan, 17”L x 24”W, specify L or R 70-72 55-64-7172 Rear floor pan, 31”L x 28”W, specify L or R 70-72 55-64-7272A Floor pan under rear seat, rocker to rocker, 58”W x 21”L 68-72 55-68-72A73 Trunk floor center, 33”L x 23”W 70-72 55-68-7374 Trunk floor sides, 33”L x 24”W, specify L or R 70-72 55-68-7475 Trunk floor brace 70-72 55-68-7576 Floor to firewall extension 70-72 55-64-7677 Full front floor brace, side to side 70-72 55-64-7778 Full center floor brace, side to side 70-72 55-64-78N.I. Full rear floor brace, side to side 70-72 55-68-78A79 Trunk filler panel (rear qtr, lower inner) 70-72 59-70-79N.I. Trunk floor, large one piece design 34”L x 56”W 68-72 55-68-8083 Front floor brace partial outer section 70-72 55-64-8384 Center floor brace partial outer section 70-72 55-64-8485 Fuel tank mounting brace 70-72 55-68-8591 Battery tray 70-72 53-68-91N.I. Battery retainer 70-72 53-65-92WINDOW CRANKWindow crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383REPLACEMENT SHEETMETALIndex# Description Year Mill Part#22 Front fender lower rear sec, 16”H 73-77 59-73-22N.I. Rocker panel, 2DR, 57”L 73-77 55-73-4050 Rear quarter 76-77 *59-76-5054 Rear quarter front half, 25”x25” 73-77 59-73-5456 Rear quarter rear half (does not fit 1973 models) 74-77 59-73-5671 Front floor pan, 31”L x 22”W, specify L or R 73-77 55-73-7172 Rear floor pan, 26”L x 22”W, specify L or R 73-77 55-73-7273 Trunk floor center, 36”L x 23”W 73-77 55-73-7374 Trunk floor sides, 36”L x 19”W, specify L or R 73-77 55-73-74N.I. Battery retainer 73-77 53-65-92WINDOW CRANKWindow crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383GAS TANKS110 Gas tank, with filler neck 73-77 *55-73-110N.I. Gas tank, w/o filler neck 73-77 55-73-111N.I. Fuel tank mounting brace, holds straps in place 73-77 55-73-85N.I. Straps for gas tank, set 73-77 55-73-115DASHTOP COVERSDT-204110110GAS TANKS110 Gas tank, w/o evap. emiss. cont. w/fill neck 70 *59-70-110N.I. Gas tank, w/evap. emiss. cont. & filler neck 70 *55-70-111N.I. Gas tank, without filler neck 71-72 59-71-111N.I. Straps for gas tank, set 70-72 55-68-115WEATHERSTRIPDoor Weatherstrip w/clips & molded ends, one pair 70-72 LM-12AWindow Weatherstrip, set 70-72 5132Roof Rail Weatherstrip w/molded ends, pr 70-72 5024Trunk seal, fits Monte Carlo 70-72 TK-4616Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.34 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comDT-220DashTop covers fit right over existing dash, makes yourdash look new againDescription Year Mill Part #Dash top, with A/C 73-77 DT-204Dash top, without A/C 73-77 DT-220All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEV. MONTE CARLO 1978-80applications THat FIT:CHEVROLETCHEV. MONTE CARLO 1981-88324050674970L70RREPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Hood latch 78-80 50-73-1340 Rocker panel 78-88 59-78-4050 Rear quarter panel 78-80 *59-78-5070 Floor pan half, 25” x 65”, specify L or R 78-88 *55-78-70N.I. Battery retainer bracket 78-80 55-78-98N.I. Battery tray 78-80 55-78-99DOOR & WINDOW CRANK HANDLESInside door handle, chrome 78-80 55-78-380Outside door handle, chrome 78-80 55-78-381Window crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383GAS TANKSGas tank w/ filler neck, exc. V6-262 c.i. (4.3L) 78-88 *55-78-110Gas tank w/o filler neck, exc. V6-262 c.i. (4.3L) 78-88 55-78-111Straps for gas tanks, set 78-80 55-78-115DASHTOP COVERSDT-209DashTop covers fit right over existing dash, makes your dash look newagain.Description Year Mill Part #Dashtop, fits Monte Carlo, w/center speaker 78-80 DT-209Dashtop, fits Monte Carlo, w/side speakers 78-80 DT-210WeatherstripRoof Rail Weatherstrip 2DR, except Fastback 78-88 5400Trunk Weatherstrip 78-88 2421Belt Weatherstrip, 4pc kit, w/o reveal molding 78-80 59-78-101inner/outer, LH and RH405070L70RREPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Hood latch 81-88 50-73-1320 Front fender, except LS model 81-88 *59-81-2031 Lower doorskin, specify L or R 81-88 59-81-3132 Inner door bottom, 2DR, universal 81-88 59-81-3240 Rocker panel 78-88 59-78-4049 Rear quarter panel, 80% complete 81-88 *59-81-4950 Rear quarter panel, lower half 81-88 *59-81-5067 Outer rear wheelhouse 81-88 59-81-6770 Full length floor pan half, 65”L x 25”W 81-88 *55-78-70N.I. Battery retainer bracket 81-88 55-78-98N.I. Battery tray 81-88 55-78-99GAS TANKSGas tank w/ filler neck, except V6-262 c.i. (4.3L) 78-88 *55-78-110Gas tank w/o filler neck, except V6-262 c.i. (4.3L) 78-88 55-78-111Gas tank w/ filler neck, with V6-262 c.i. (4.3L) 85-88 *59-85-114Gas tank w/o filler neck, with V6-262 c.i. (4.3L) 85-88 59-85-115Straps for gas tanks, set 78-80 55-78-115DOOR & WINDOW CRANK HANDLESInside door handle, chrome 81-88 55-78-380Outside door handle, chrome 81-88 55-78-381Window crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383WEATHERSTRIPRoof Rail Weatherstrip, 2DR 78-88 5400Trunk Weatherstrip 78-88 2421Belt Weatherstrip, 4pc kit, w/o reveal molding 81-88 59-81-102inner/outer, LH and RHDASHTOPS COVERSDashTop covers fitright over existing dash,makes your dash looknew again.Description Year Mill Part #Dashtop, fits Monte Carlo, with outside speakers 81-88 DT-234All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com35

applications THat FIT:CHEVROLETCHEV. NOVA / CHEVY II 1962-65Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEV. NOVA / CHEVY II 1966-670605REPLACEMENT SHEETMETALIndex# Description Year Mill Part#01 Front bumper, chrome, w/o lamp holes 62-64 54-62-0102 Front bumper, chrome with lamp holes 65 54-65-0205 Radiator support with lower brace 65 *54-65-0510 Hood 62-65 *54-62-1020 Front Fender 62-65 *54-62-2022 Front fender lower rear sec, 14”H 62-65 54-62-2224 Front fender lower rear half, 20”Hx28”L 62-65 54-62-2430 Doorskin, front, 27”H 62-65 *54-62-3040 Rocker, 2DR, 49”L, slip over type 62-67 54-62-40N.I. Rocker, 4DR, 69”L, slip over type 62-67 54-62-42N.I. Rocker, 2DR, 71”L, factory style 62-67 54-62-4349 Rear quarter, 2DR, 75”L x 26”H 62-65 *54-62-4950 Rear quarter, 4DR, 24”Hx50”L 62-65 54-62-5057 Rear quarter lower rear sec, 23”Hx31”L 62-65 54-62-5760 Rear Bumper, chrome 62-65 54-62-6061 Trunk lid 62-64 *54-62-6170 Floor pan half, full length, 60”Lx27”W(rear), 21”W(front) 62-67 54-62-7070A Floor pan half, 79”Lx29”W extends up center tunnel 62-67 *54-62-70A71 Floor pan front section, 29”L x 21”W(at front) 62-67 54-62-7172 Floor pan rear section, 29”L x 27”W 62-67 54-62-7273 Front floor brace, universal 62-67 54-62-7374 Center floor brace, L or R, 26”L 62-67 54-62-7475 Trunk floor center, 39” x 39” 62-67 *54-62-7576 Outer rear wheelhouse, exc. convertible & wagon 62-65 54-62-7677 Transmission mount cross member, specify L or R 62-65 54-62-7778 Shifter tunnel cover 62-65 54-62-7891 Battery tray 62-67 54-62-9192 Battery retainer (6 cylinder only) 62-67 53-65-92WEATHERSTRIPDoor Weatherstrip w/clips, 2DR, pair 62-67 4000Door W/strip w/clips & molded ends, 2DR, pair 62-67 4002Door Weatherstrip, 4DR, front, pair 62-67 4080Door Weatherstrip, 4DR, rear, pair 62-67 4080ATrunk Weatherstrip 62-67 4010WINDOW CRANK HANDLEWindow crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-3836160REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Front bumper, chrome 66-67 54-66-01N.I. Front bumper to grille filler panel 66-67 54-66-0506 Radiator support with lower brace 66-67 *54-66-0610 Hood, cowl induction style 66-67 *54-66-1020 Front fender 66 *54-66-2020 Front fender 67 *54-67-2021 Front fender lower rear section, 12”H 66-67 54-66-2130 Doorskin, 2DR, full height, 27”H 66-67 54-66-3040 Rocker, 2DR, 49”L 62-67 54-62-40N.I. Rocker, 4DR, 69”L, slip over type 62-67 54-62-42N.I. Rocker, 2DR, 71”L, factory style 62-67 54-62-43N.I. Rear quarter panel, Factory style, 2DR hardtop 66-67 *54-66-4950 Rear quarter, 26”x75”, made in Taiwan 66-67 *54-66-50N.I. Rear bumper, chrome 66-67 54-66-6063 Tail panel assembly, Factory style 66-67 54-66-63N.I. Trunk lid 66-67 54-66-6465 Rear window to trunk panel 66-67 54-66-6570 Floor pan half, 60”Lx27”W(rear)21”W(front) 62-67 *54-62-70N.I. Floor pan half, 79”Lx29”W extends up center tunnel 62-67 *54-62-70A71 Floor pan front section, 29”L x 21”W(at front) 62-67 54-62-7172 Floor pan rear section, 29”L x 27”W 62-67 54-62-72N.I. Front floor brace, universal 62-67 54-62-73N.I. Outer rear wheelhouse, except wagon 66-67 54-66-7374 Center floor brace,26”L, specify L or R, 62-67 54-62-7475 Trunk floor center, 39” x 39” 62-67 *54-62-75N.I. Transmission crossmember, specify L or R 66-67 54-62-7778 Shifter tunnel cover 66-67 54-62-78N.I. Filler panel (inside rear qtr. lower rear sec.) 66-67 54-66-7991 Battery tray 62-67 54-62-9192 Battery retainer (6 cylinder only) 62-67 53-65-92WEATHERSTRIPDoor Weatherstrip w/clips, 2DR, pr 62-67 4000Door Weatherstrip w/clips & molded ends, 2DR, pr 62-67 4002Door Weatherstrip, 4DR, front, pr 62-67 4080Door Weatherstrip, 4DR, rear, pr 62-67 4080AWindow Weatherstrip, 2DR, set 66-67 4069AWindow Weatherstrip, 4DR, set 66-67 4071Trunk Weatherstrip 62-67 4010WINDOW CRANK HANDLEWindow crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383DASH TOP COVERDT-245DT-235Dashtop Cover, fits Nova, Super Sport 65 DT-245Dashtop Cover, fits Nova, Super Sport 66 DT-2352163Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.36 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEV. NOVA 68-74CHEVY II 68BUICK APOLLO/OLDS. OMEGA/PONTIAC VENTURA0407Aapplications THat FIT:CHEVROLETIndex# Description Year Mill Part#25 Front inner fender (wheelhouse) 68-74 54-68-25N.I. Shock tower support/bolt plate, specify L or R 68-74 54-68-2730 Lower doorskin, 2DR, 7”H 68-79 54-68-3032 Front doorskin, 2DR, 27”H (modify for 73-74 models) 68-72 *54-68-3240 Rocker panel, 2DR, 64”L, slip on style 68-79 54-68-40N.I. Rocker panel, 2DR, factory style 68-79 54-68-41N.I. Inner rocker, factory style 68-79 54-68-44N.I. Inner rocker panel assembly w/kick panel support 68-72 54-68-4547 Rear quarter panel, 2DR sedan, fits Nova, 80% full, 25”H 68-69 *54-68-47N.I. Rear quarter panel, 2DR sedan , w/sail panel & door jamb 68-69 *54-68-47A48 Rear quarter panel, 2DR sedan, fits Nova/Ventura, 80% full 70-72 *54-70-48N.I. Rear quarter panel, 2DR sedan w/sail panel & 70-72 *54-70-48Adoor jamb fits Nova/Ventura II50 Rear quarter, 20”H, 2DR sedan and hatchback 73-74 *54-68-50(alter at marker hole for 68-72 models) (extra metal is added to the top ofthis panel for strengthening purposes while in transit, this metal will need tobe trimmed off)60 Tail light panel, fits Nova 68-69 54-68-6061 Tail light panel, fits Nova 70-72 54-70-6161 Tail light panel, fits Nova 73-74 54-73-6162 Rear Bumper, fits Nova 68-72 54-68-62N.I. Rear deck filler panel, 2DR Sedan 68-74 54-68-6364 Trunk lid, Nova/Ventura II, exc. hatchback 68-74 *54-68-64N.I. Trunk gutter side brace, specify L or R 68-72 54-68-66N.I. Floor assembly w/braces, factory style 68-74 *54-68-6770 Floor pan half, full length, 56”L x 18”W, specify L or R 68-79 54-68-7071 Front floor pan half, 28” x 18”W, specify L or R 68-79 54-68-7172 Rear floor pan half, 29”L x 18”W, specify L or R 68-79 54-68-72N.I. Toeboard 16”x19” 68-69 52-67-73N.I. Under rear seat brace, specify L or R 68-74 54-68-74A75 Trunk floor center, except hatchback, 31”Lx40”L 68-72 54-68-7576 Trunk floor side, except hatchback, 31”Lx12”W 68-72 54-68-7678 Filler panel, trunk side (inner lower rear quarter) 68-74 54-68-7879 Outer rear wheelhouse 68-74 54-68-7991 Battery tray 68-74 54-68-9192 Battery retainer 68-72 53-65-92N.I. Gas tank brace, 2 required, sold each 68-72 54-68-95GAS TANKSGas tank w/o filler neck 74-79 54-73-111Straps for gas tank 73-79 54-73-115WINDOW CRANK HANDLEWindow crank handle w/black knob, universal All 53-58-380Window crank handle w/clear knob, universal All 53-58-38364REPLACEMENT SHEETMETALIndex# Description Year Mill Part#01 Radiator support (modify for L6, big block V8 and 68-74 *54-68-0173-74 w/AC or HD radiator)02 Front Bumper, fits Nova 70-72 54-70-0204 Filler panel, grille to bumper, plastic, Nova 68-72 54-68-04N.I. Upper inner cowl panel 68-70 52-67-1507A Grille, fits Nova SS 70-72 54-70-07AN.I. Front edge moulding assembly for hood 68-72 54-68-11N.I. Engine mount, fits 307 cu.in. V8 engine 68-72 53-68-12N.I. Engine mount, fits 350 cu.in V8 engine 69-72 53-69-12BN.I. Upper dash panel, steel 68-74 52-69-13N.I. Armrest base, black plastic, paint to match, 68 53-68-14with deluxe interior, specify L or RN.I. Cowl side panel, specify L or R 67-69 52-67-15AN.I. Armrest base mouldings, stainless steel, set of L & R 68 53-68-17N.I. Kick panel support (hinge pillar to rocker reinf.) 68-72 52-67-1820 Front fender, fits Nova 68-69 *54-68-2020 Front fender, fits Nova 70-74 *54-70-2022 Front fender lower rear sec,12”H 68-74 54-68-22WeatherstripDoor Weatherstrip w/clips, 2DR, pair 68-74 4020Door Weatherstrip, w/clips, 4DR, front, pair 68-74 4081Door Weatherstrip, w/clips, 4DR, rear, pair 68-74 4081AWindow Weatherstrip w/ correct bead, 2DR, set 68-74 40741Window Weatherstrip, 4DR, set 68-72 40752DASH TOP COVERSDT-205DT-211DashTop covers fit right over existing dash, makes your dash look new again.Description Year Mill Part #Dashtop without A/C, fits Nova 69-74 DT-205Dashtop with A/C, fits Nova 69-74 DT-211All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com37

applications THat FIT:CHEVROLET/DATSUN/NISSANCHEV. NOVA 75-79Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128CHEV. VEGA, PONTIAC ASTRE 71-77BUICK APOLLOOLDS OMEGAPONTIAC VENTURAREPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Rear quarter skin, 2DR 71-77 *63-71-50WINDOW CRANKWindow crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383DATSUN 240Z/260Z/280Z 70-78REPLACEMENT SHEETMETALIndex# Description Year Mill Part#22 Front fender lower rear sec, 13”H 75-79 54-75-2230 Doorskin, 2DR, lower 7”H 68-79 54-68-3040 Rocker panel, with lower quarter, 2DR 68-79 54-68-40N.I. Rocker panel, 2DR, factory style 68-79 54-68-41N.I. Inner rocker, factory style 68-79 54-68-4448 Dog leg, outer, 4DR 75-79 54-75-4850 Rear quarter, 20”H, 2 Door only 75-79 *54-75-5057 Rear quarter, lower rear sec, 12”H, 2 or 4 DR 75-79 54-75-5770 Floor pan half, full length, 56”L x 18”W, specify L or R 68-79 54-68-7071 Front floor pan half, 28”Lx18”W, specify L or R 68-79 54-68-7172 Rear floor pan half, 29”Lx18”W, specify L or R 68-79 54-68-72GAS TANKSGas tank w/o filler neck 74-79 54-73-111Straps for gas tanks 73-79 54-73-115(Only parts on front clipwill fit ZX and 2+2 models.)REPLACEMENT SHEETMETALIndex# Description Year Mill Part21 Front fender lower rear, 11”H 70-78 167-70-2130 Doorskin, outer 8”H 70-78 167-70-3040 Rocker 70-78 167-70-4050 Rear quarter lower front, 11”H 70-78 167-70-5051 Rear wheel arch w/lower front qtr. 70-78 167-70-5152 Rear quarter lower rear, 10”H 70-6/74 167-70-5275 Rear wheelhouse, outer half 70-78 167-70-75DATSUN/NISSAN 280ZX 79-83DOOR & WINDOW CRANK HANDLEInside door handle, chrome, specify L or R 35-82-382Window crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383WEATHERSTRIPDoor Weatherstrip w/clips, 2DR, pr 75-79 4024Door Weatherstrip, w/clips, 4DR, front, pr 75-79 40813Door Weatherstrip, w/clips, 4DR, rear, pr 75-79 40814REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Center valance 79-83 167-79-01DASHTOPSDashTop coversfit right overexisting dash,makes your dashlook new again.DT-224Description Year Mill Part #Dashtop without A/C, fits Nova 75-76 DT-224Dashtop with A/C, fits Nova 75-76 DT-237Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.38 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comDODGE ARIES/PLYMOUTH RELIANT 81-89ALSO FITS: DODGE 400/600 1982-88DT-237 42REPLACEMENT SHEETMETALIndex# Description Year Mill Part#42 Rocker panel, 4DR 81-89 77-81-42All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128applications THat FIT:DODGEDODGE CHALLENGER 70-74277474-70-4906RREPLACEMENT SHEETMETALIndex# Description Year Mill Part#00 Front valance, steel with light holes 70-71 74-70-0006R Radiator support bracket, RH 71-74 74-70-06R11 Battery tray 70-74 74-70-1112 Front wheelhouse, upper section 70-74 74-70-1213 Front wheelhouse, rear section 70-74 74-70-1315 Shifter tunnel cover, manual trans. 70-74 74-70-1516 Firewall, side panel, specify L or R 70-74 74-70-16N.I. Firewall panel complete 70-74 74-70-17N.I. Front fender bracket, specify L or R 70-74 74-70-1820 Front fender 70-71 *74-70-2020 Front fender 72-74 *74-72-2022 Front fender lower rear section 70-74 74-70-2227 Trunk floor exhaust heat shield 70-74 73-70-27N.I. Inner fender cover plates, one pair 70-74 74-70-2931 Outer doorskin, 8”H 70-74 74-70-3140 Rocker panel 70-74 74-70-4049 Rear quarter, factory style 70-71 *74-70-4949 Rear quarter, factory style 72-74 *74-72-4950 Rear quarter skin to crown line 70-71 *74-70-5050 Rear quarter skin to crown line 72-74 *74-72-5054 Quarter panel lower front section, 18”H 70-74 74-70-5456 Quarter panel lower rear section, 14”H 70-74 74-70-56N.I. Tail panel 70 74-70-5960 Trunk lid 70-74 *74-70-60N.I. Trunk Lid Latch 70-74 74-70-60BN.I. Trunk weatherstrip gutter, specify L or R 70-74 74-70-6162 Rear tail filler panel, under tail lights to bumper 70-74 74-70-62606274-72-49Index# Description Year Mill Part#63 Rear valance, steel with dual exhaust 70-74 74-70-6364 Rear valance, steel without dual exhaust 70-74 74-70-64N.I. Tailpipe tip hanger bracket, RH 70-74 74-70-65R68 Panel between rear window and trunk lid 70-74 74-70-68N.I. Front floor pan complete, side to side, 47”L x 58”W 70 *74-70-70N.I. Front floor pan complete, side to side, 47”L x 58”W 71-74 *74-71-7071 Frt. floor pan to factory seam behind frt. seat, 26”x52” 70-74 74-70-7172 Front floor pan front sec; 26” x 26”, specify L or R 70-74 74-70-7273 Rear floor pan, 34”L x 28”W, specify L or R 70-74 74-70-7374 Floor pan under rear seat, side to side 70-74 *74-70-7475 Outer rear wheelhouse 70-74 74-70-7576 Trunk floor half 70-74 74-70-76N.I. Trunk floor complete 70-74 *74-70-76A77 Rear cross member, between bumper & trunk, 60”L 70-74 74-70-7778 Rear wing brackets, sold in pairs 70-71 74-70-7879 Trunk filler panel, inner rear qtr lower rear section 70-74 74-70-7981 Rear frame rail, specify L or R 70-74 74-70-81N.I. Rear frame rail, extended, specify L or R 70-74 74-70-81AN.I. Rear floor pan shock absorber crossmember, univ 70-74 74-70-91N.I. Rear shock absorber crossmember bracket 70-74 74-70-91AN.I. Rear seat floor brace, specify L or R 70-74 74-70-92N.I. Front floor support brace, front 70-74 74-70-94N.I. Fuel tank mounting brace 70-74 74-70-96N.I. Spare tire hold down bracket, Coupe 70-74 77-67-76AN.I. Front floor support brace, rear support 70-74 74-70-94BN.I. Torsion bar anchor crossmember 70-74 74-70-98CONTINUED ON NEXT PAGEAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com39

applications THat FIT:DODGEDODGE CHALLENGER 70-74Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128AUTOMOTIVE BULBSDASH TOPS & INTERIOR PANELSDashTop covers fit right overexisting dash, makes yourdash look new again.Description Year Mill Part #Dashtop, E body, w/o A/C 70-74 DT-908Dashtop, E body, with A/C 70-74 DT-909Kick Panels, Front, black, pair 70-74 DT-97Door Panels, black, pair 70-74 DT-990BDoor Panels, whtie, pair 70-74 DT-990WPadded arm rest70-74 DT-990PLRInterior rear qtr, hardtop, black, pair 70-74 DT-991BInterior rear qtr, hardtop., white, pair 70-74 DT-991WReplacement seat back, black, pair 70 DT-98BReplacement seat back, white, pair 70 DT-98WReplacement seat back, black, pair 71-74 DT-99BReplacement seat back, white, pair 71-74 DT-99WBench seat end caps 73-74 DT-96WEATHERSTRIPDT-908Description Year Part No.Molded door seal, 2-Door Hardtops, R & L 70-74 LM-23-AMade with steel cores and proper clips. A veryaccurate and detailed reproduction, Replaces OEM #2895478/9Trunk Seal Kit70-74 TK-64-A-14Heavy Duty Turn Signal,Stop,Tail,Parking LightB-1157 (CLEAR)Heavy Duty Turn SignalParking LightB-1157NA (AMBER)Turn Signal, Parking LightWedge baseB-3156 (CLEAR)Heavy Duty Turn Signal,Stop/Tail Parking LightB-2057 (CLEAR)Heavy Duty Turn SignalParking LightB-2057-NA (AMBER)Heavy Duty Back-up TurnSignal Light and HighMount Stop LightB-1156FRAME PATCHES that fit CHALLENGERSub FrameTorsion Mount(T-Mount Forward)10 GaugeHalogen High/Low BeamHeadlamp BulbsB-9003B-9004B-9007Halogen HeadlampReplacement BulbB-9005 Low BeamB-9006 High Beam• Custom-formed, heavy gauge steel• Cap design fits over existing frame rail• Strengthens weak unibody designFull Front Frame Cap13 GaugeSub Frame Front“T” Frame CapCaps area at(Radiator Support Back)Sub-Frameand TorsionBar Mount13 Gauge13 GaugeDescription with “A” Dim. Year Part No.LH Torsion Mount, 22” 70-74 74-70-82-LRH Torsion Mount, 19-1/2” 70-74 74-70-82-RSub Frame Front, 30-1/2” 70-74 74-70-83Sub Frame, 34” 70-74 74-70-87Full Front Frame Cap, 61” 70-74 74-70-84“T” Frame Cap 70-74 74-70-85Turn Signal, Stop/TailParking Light, Wedge BaseB-3057 (CLEAR)(Replaces 2457 & 2358)B-3157 (CLEAR)(Replaces 2458 & 2359)Heavy Duty IndicatorInstrument, Side Marker,License LightB-194 (CLEAR)B-194A (AMBER)Turn Signal, Parking LightWedge baseB-3057NA (AMBER)(Replaces 2457NA & 2458NA)B-3157NA (AMBER)(Replaces 2458NA & 2359NA)Heavy Duty InstrumentIndicator LightB-189540 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128applications THat FIT:DODGEDODGE CHARGER 66-701966-19671968-19700160812340REPLACEMENT SHEETMETALIndex# Description Year Mill Part#01 Front valance 68-69 85-68-01N.I. Radiator support bracket 68-70 85-68-03N.I. Torsion bar anchor crossmember 66-70 86-66-04N.I. Front frame rail, specify L or R 66-70 85-66-0911 Battery tray 66-69 86-66-1111 Battery tray 70 74-70-1116 Front fender splash shield 66-70 85-66-1622 Front fender lower rear section, 17”H 66-67 85-66-2222 Front fender lower rear section 68-70 85-68-2223 Inner front wheel shield, 18”H x 36”L 68-70 85-68-23N.I. Inner upper fender to cowl, specify L or R 66-70 85-66-27N.I. Upper cowl top 66-70 85-66-28N.I. Inner fender cover plates, one pair 66-70 85-66-2940 Rocker panel 68-70 85-68-4049 Rear quarter panel, skin only, 35”H 68 *85-68-4949 Rear quarter panel, skin only, 35”H 69 *85-69-4949 Rear quarter panel, skin only, 35”H 70 *85-70-49N.I. Rear quarter panel, factory style 70 *85-70-5054 Rear quarter, lower front section, 18”H 68-70 85-66-5455 Rear quarter, lower rear section, 15”H 68-70 85-66-5556 Outer rear wheelhouse 68-70 85-68-5658 Rear corners (lower quarter to valance extension) 68-70 85-68-5860 Rear valance 68 85-68-6060 Rear valance 69-70 85-69-6065 Rear window to trunk panel 68-70 85-68-65N.I. Sail panel, specify L or R 68-70 85-68-66N.I. Floor pan rear side rail support (to inner sill) L or R 68-70 85-66-68N.I. Rear cross rail assembly (5 pcs.) includes: center rail, 68-70 85-68-68outers & extensions.N.I. Outer rear cross rail, specify L or R 68-70 85-68-68EN.I. Bucket seat brackets, 4 piece set 66-70 85-66-6970 Front floor 3/4 length to factory seam, 56” Lx28”W 66-70 85-66-70N.I. Front floor pan complete, side to side, one piece 68-70 *85-68-7172 Front floor pan half, 24”Lx26”W, specify L or R 66-70 85-66-7274 Rear floor pan half, 29”Lx22”W, specify L or R 66-70 85-66-74N.I. Rear floor pan complete, side to side, one piece 68-70 *85-68-7576 Trunk floor half, 51”Lx29”W 68-70 85-68-76N.I. Trunk floor complete 68 *85-68-7778 Trunk floor center 66-67 85-66-7879 Outer trunk floor section with inner rear quarter 66-67 185-66-79All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Index# Description Year Mill Part#79 Inner rear quarter lower rear section 68-70 85-68-7978A Trunk cross member extension, specify L or R 68-70 86-68-78A78B Trunk rear cross member, 60”L 68-70 86-68-78(fits between rear bumper and trunk)80 Gas tank brace 68-70 85-66-8081 Gas tank strap support, weld under trunk floor, univ 68-70 85-68-8182 Rear bumper support bracket, univ. 2 required 68-70 85-68-82N.I. Rear floor pan shock absorber crossmember 68-70 86-68-92N.I. Rear frame rail assembly, specify L or R 68-70 86-68-93N.I. Front floor support brace, front, univ (2 required) 68-70 85-68-94N.I. Front floor support brace, rear, univ (2 required) 68-70 85-68-95N.I. Spare tire hold down bracket 66-70 85-68-97N.I. Rear spring front hanger bracket, specify L or R 68-70 85-66-98N.I. Rear spring front hanger bracket to rail brace, L or R 68-70 85-66-99DASHTOPSDT-911DashTop covers fitright over existingDT-910dash, makes yourdash look new again.DT-91DT-90Description Year Mill Part #Dashtop cover, fits Charger/Coronet/Superbee 68 DT-911Dashtop cover, fits Charger/Coronet/Superbee 69-70 DT-910Bucket seat end caps, pair of left and right 68-69 DT-90Bench seat end caps, pair of left and right 68-69 DT-91WEATHERSTRIPDescription Year Part No.Molded door seal, 2-Door Hardtops and Convertibles, R & L 66-67 LM-23-BMade with correct ends and clips. Made of softskin covered sponge. Perfect reproductionMolded door seal, 2-Door Hardtops, R & L 68-70 LM-23Made with steel cores and white clips plus molded ends.Trunk Seal Kit 66-67 TK-2326Made like original w/2 different profiles. Ready to install.Trunk Seal Kit 68-70 TK-2320Made like original w/2 different profiles. Ready to install.Roof rail seals, 2-Door hardtops (no posts) 68-70 RR-4001-ASpecify LH (Drivers Side) or RH (Passenger Side) When Ordering.78Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com8241

applications THat FIT:DODGEDODGE CHARGER 71-74Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128DODGE CORONET 65DODGE POLARA 63-64REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Radiator support bracket, RH only 71-74 74-70-06RN.I. Battery tray 71-72 74-70-1112 Front inner fender, upper section 71-74 74-70-1213 Front inner fender, rear section 71-74 74-70-13N.I. Four speed tunnel hump cover for auto to manual 71-74 74-70-15conversion22 Front fender lower rear section, 19”H 71-72 85-71-2240 Rocker panel 71-74 85-71-4050 Rear Quarter panel skin 73-74 *85-73-5072 Front floor pan half, 26” x 26” 71-74 74-70-72N.I. Trunk floor half 71-73 85-71-76N.I. Rear floor pan, specify L or R (modify to fit 71 & 74) 72-73 85-72-7779 Inner rear qtr, lower rear section 73-74 74-73-79N.I. Gas tank brace 71-74 85-71-80N.I. Trunk floor extension panel, die formed 71-72 85-71-92N.I. Trunk floor extension panel, die formed 73-74 85-73-92N.I. Rear frame rail 71-74 85-71-93N.I. Rear spring shackle support 71-74 85-71-94N.I. Front floor support brace, front, univ (2 required) 71-74 74-70-94N.I. Front floor support brace, rear 71-74 74-70-94BN.I. Spare tire hold down bracket 71-73 77-67-76AN.I. Rear spring front hanger bracket, specify L or R 71-72 74-70-98FRAME PATCHES that fitDODGE CHARGERS 66-74Torsion Mount• Custom-formed, heavy gauge steel• Cap design fits over existing frame rail• Strengthens weak unibody designSub Frame(T-Mount Forward)REPLACEMENT SHEETMETALIndex# Description Year Mill Part#11 Cowl panel, left side only 63-65 185-63-11N.I. Cowl panel, lower left side only, beneath 185-63-11 63-65 185-63-12N.I. Shifter tunnel 63-65 185-63-1415 Inner front wheel shield 65 185-63-1516 Front fender splash shield 63-65 185-63-1622 Front fender lower rear sec. 63-64 185-63-2251 Rear wheel arch area 63-65 185-63-5156 Rear quarter lower rear sec. 63-65 185-63-5672 Floor pan front section, 25”L x 25”W 63-65 185-63-72N.I. Floor pan under front seat, 20”L x 31”W 63-65 185-63-7374 Rear floor pan half, 23”L x 23”W 63-65 185-63-7479 Inner rear quarter, lower rear sec 63-65 185-63-79DODGE CORONET 66-6710 GaugeSub Frame Front(Radiator Support Back)13 GaugeRearShackleMountFull Front Frame Cap• Custom-formed, heavy gauge steel• Cap design fits over existing frame rail• Strengthens weak unibody design13 Gauge“T” Frame CapCaps area at Sub-Frameand Torsion Bar Mount13 Gauge13 GaugeDescription with “A” Dim. Year Part No.LH Torsion Mount, 21-3/4” 66-74 85-66-82-LRH Torsion Mount, 19-3/4” 66-74 85-66-82-RSub Frame Front, 35-1/2” 66-74 85-66-83Sub Frame, 25-1/2” 66-74 85-66-87Full Front Frame Cap, 61” 66-74 85-66-84“T” Frame Cap 66-74 85-66-85Rear Shackle Mount 66-74 85-66-86Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.42 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comREPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Torsion bar anchor crossmember 66-70 86-66-04N.I. Front frame rail, specify L or R 66-70 85-66-0911 Battery tray 66-67 86-66-1122 Front fender lower rear section 66-67 85-66-22N.I. Inner front wheel shield, 18”H x 36”L 66-67 85-68-2324 4-Speed tunnel hump, for auto to manual conversion 66-67 85-66-24N.I. Inner upper fender to cowl 66-70 85-66-2751 Rear wheel arch area, 21”H x 47”L 66-67 185-66-5157 Rear quarter, lower rear section 66-67 185-66-5770 Front floor 3/4 length to factory seam, 56”L x 28”W 66-70 85-66-7072 Front floor pan half, 24”L x 26”W 66-70 85-66-7274 Rear floor pan half, 29”L x 22”W 66-72 85-66-74N.I. Trunk floor center 66-67 85-66-7879 Trunk filler panel 66-67 185-66-79WEATHERSTRIPDescription Year Part No.Molded door seal, 2DR Hardtops and Convertibles, R & L 66-67 LM-23-BMade with correct ends and clips. Made of soft skin covered sponge.Trunk Seal Kit 66-67 TK-2325Made like original with two different profiles. Ready to install.All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128applications THat FIT:DODGEDODGE CORONET (Incl. R/T) & SUPERBEE 68-70REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Radiator support bracket 68-70 85-68-03N.I. Torsion bar anchor crossmember 66-70 86-66-04N.I. Front frame rail, specify L or R 66-70 85-66-0911 Battery tray 68-69 86-66-1111 Battery tray 70 74-70-1119 Front inner wheelhouse 68-70 86-68-1922 Front fender lower rear section 68-70 761-68-22N.I. Inner front wheel shield, 18”H x 36”L 68-70 85-68-2324 4-Speed tunnel hump, for auto to manual conversion 68-70 85-66-24N.I. Inner upper fender to cowl 66-70 85-66-27N.I. Upper cowl top 68-70 85-66-28N.I. Inner fender cover plates, one pair 68-70 85-66-2940 Rocker, 2DR 68-70 761-68-4050 Rear quarter panel, 2DR 68 *761-68-5050 Rear quarter panel, 2DR 69 *761-69-5050 Rear quarter panel, 2DR 70 *761-70-5051 Rear wheel opening repair panel, approx. 5” span 68-70 761-68-5154 Rear quarter lower front section, 12”H 68-70 761-68-5456 Rear quarter lower rear section, 12”H 68-70 761-68-5656 Outer rear wheelhouse, except convertible 68-70 85-68-5665 Rear window to trunk panel 68-70 86-68-6567 Convertible top reinforcement, rear corner above deck lid 68-70 761-68-6768 Rear window corner repair panel, exc. conv. 68-70 761-68-68N.I. Floor pan rear side rail support (to inner sill) L or R 68-70 85-66-68N.I. Rear cross rail assembly, (5 pcs.) includes: 68-70 85-68-68center rail, outers & extensionsN.I. Outer rear cross rail, specify L or R 68-70 85-68-68EN.I. Bucket seat brackets, 4 piece set 66-70 85-66-6970 Front floor 3/4 length to factory seam, 56”Lx28”W 68-70 85-66-7072 Front floor pan half, 24”Lx26”W 68-70 85-66-7274 Rear floor pan half, 29”Lx22”W 68-70 85-66-74N.I. Rear floor pan complete, side to side, one piece 68-70 *85-68-7576 Trunk floor half, 41”Lx29”W, die formed, specify L or R 68-70 86-68-76N.I. Trunk floor half, 51”L, die formed, specify L or R 68-70 86-68-76AN.I. Trunk floor complete, one piece 68-70 *86-68-7977 Trunk floor, side extension w/inside lower quarter 68-70 86-68-77Index# Description Year Mill Part#78 Trunk rear cross member 68-70 86-68-78(fits between rear bumper and trunk)N.I. Trunk cross member extension 68-70 86-68-78AN.I. Gas tank brace 68-70 85-66-80N.I. Gas tank strap support 68-70 85-68-8186 Rear shackle mount 68-70 85-66-86N.I. Rear floor pan shock absorber crossmember 68-70 86-68-92N.I. Rear frame rail assembly 68-70 86-68-93N.I. Front floor support brace, front, univ (2 required) 68-70 85-68-94N.I. Front floor support brace, rear, univ (2 required) 68-70 85-68-95N.I. Spare tire hold down bracket 66-70 85-68-97N.I. Rear spring front hanger bracket, specify L or R 68-70 85-66-98N.I. Rear spring front hanger bracket to rail brace, L or R 68-70 85-66-99DASHTOPSDashTop covers fitright over existingdash, makes yourdash look new again.WEATHERSTRIPDT-90DT-910DT-91Description Year Mill Part #Dashtop, fits Coronet/Super Bee B body 69-70 DT-910Bucket seat end caps, pair of left and right 68-69 DT-90Bench seat end caps, pair of left and right 68-69 DT-91Description Year Part No.Molded door seal, 2-Door Hardtops, R & L 68-70 LM-23Made with steel cores and white clips plus molded ends.Molded roof rail seal, 2-Door hardtops (no posts) 68-70 RR-4001-ATrunk Seal Kit 68-69 TK-2322Made like original w/2 different profiles. Ready to install.Trunk Seal Kit 70 TK-2327All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com43

applications that fit:DODGE/PLYMOUTHDODGE DART 63-66Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128DODGE NEON 95-99Index# Description Year Mill Part#N.I. Rear wheel arch area, 20”H x 40”L 63-66 77-64-51N.I. Rear quarter, lower rear section, 40” L 64-66 77-64-57(modify tail lamp area for 1963)Index# Description Year Mill Part#42 Rocker panel, 4DR 95-99 115-95-42DODGE DART/SWINGER 67-77PLYMOUTH SCAMP/VALIANT 67-76DUSTER 70-76DODGE SHADOW 87-94ALSO FITS: PLYMOUTH SUNDANCE 87-94 &PLYMOUTH DUSTER 1992-944042REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker, 2DR, 62”L 87-94 178-87-4042 Rocker, 4DR, 62”L 87-94 178-87-42REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Inner front wheel shield 67-76 77-67-1222 Front fender lower rear sec; fits Dart 67-76 77-67-2223 Front fender lower rear sec; fits Duster 70-76 77-70-23N.I. 4-Speed tunnel hump, for auto to manual conversion 67-76 77-67-24N.I. Front fender innder splash shield, Dart/Duster 67-75 77-67-2640 Rocker, 2DR 67-76 77-67-4050 Rear quarter, 2DR, fits Dart, no marker hole 67-68 *77-67-5050 Rear quarter, 2DR, fits Dart, rect. marker hole 69 *77-69-5050 Rear quarter, 2DR, fits Duster, Dart Sport/Demon 70-71 *76-70-50(marker light hole must be modified for 1972-76)50 Rear quarter, 2DR, fits Swinger/Scamp 70-71 *77-70-50(alter marker hole for 72-76 Dart/Dart Swinger)N.I. Rear quarter, 2DR, fits Duster, Dart Sport/Demon 72-76 *76-72-50N.I. Rear quarter lower rear section, 18”H x 44”L, Duster 70-76 76-70-5770 Front floor pan section 67-76 77-67-7071 Rear floor pan section 67-76 77-67-7176 Trunk floor center sec, bottom of tire well 67-76 77-67-76N.I. Spare tire hold-down bracket 67-71 77-67-76A77 Trunk floor half, 26”W x 32”D (L or R) 67-74 77-67-7779 Trunk filler panel, fits Dart 67-76 77-69-7979 Trunk filler panel, fits Dart Sport, Duster, Demon 70-74 77-70-7991 Battery tray 67-74 77-67-91DODGE DYNASTY FWD 88-93CHRYSLER NEW YORKER FWD 88-93ALSO FITS: FIFTH AVE. & IMPERIAL 1990-93REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker panel, 4DR 88-93 780-88-40DODGE INTREPID 93-97CHRYSLER NEW YORKER & LHS 94-9740DASHTOPDashTop covers fit rightover existing dash, makesDT-904your dash look new again.Description YearMill Part #Dashtop, fits Dart A Body 68 DT-912Dashtop, fits Dart A Body 69 DT-904Dashtop, fits Dart/Demon/Swinger/Sport 69-76 DT-903Bucket Seat End Caps, sold in pairs 68-69 DT-90Bench Seat End Caps, sold in pairs 68-69 DT-9540REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker panel, 4DR 93-97 780-93-40Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.44 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128applications THat FIT:FORDFORD CARS 35-3660131935Tailpans fit under the lowerrear body section under thespare tire mount. They arestamped in the USA out of18-gauge steel and includecorrect body lines and raisedarea for bumper slots.60A60B1860C35706630Sold as a set of inner andouter, Order LH or RH7754405578REPLACEMENT SHEETMETALIndex# Description Year Mill Part#13 Dashboard, steel dash made expecially for street 35-36 92-35-13rodders, smooth dash, no holes. same contours as original dash, 18 gauge18 Lower Front Cowl patch panel, Pair of LH and RH 35-36 92-35-18Fixes the area front of firewall to the front door post where the front fenderbolts to the main part of the body30 Lower inner and outer doorskin, fits 2DR Sedan, Coupe/3W 35-36 92-35-30N.I. Lower inner and outer doorskin, fits Coupe/5W 35-36 92-35-3135 Front Door Rear Post Reinforcement to Flr. Brace (pr.) 35-36 92-35-3540 Rocker Panels, fits 2DR Sedan & Coupes, pairs only 35-36 92-35-4054 Rear fender lower front section, 8”, LH or RH 35-40 92-35-54(repair fender where it mounts to running board)55 Lower Quarter Panel Section, fits All 2DR Sedans 35-36 92-35-55and Long Door Coupes, Pair of LH and RH60 Tailpan, fits Humpback Sedan 35-36 92-35-6060A Tailpan, fits Flatback Sedan 35-36 92-35-60A60B Tailpan, fits Coupe, Roadster or Cabriolet 35-36 92-35-60B60C Trunk floor Extension, between tailpan & main flat 35-36 92-35-60Carea of trunk floor (tool box compartment)66 Riser over the Axle, rises from rear of floor to trunk 35-36 92-35-6670 Front floor pan kit, w/toe board & tunnel 35-36 92-35-70street rod style (flat floor), 6 pc. kit for L & R side & center humpMade to fit Big Block firewall77 Trunk Floor, extends from riser to trunk 35-36 92-35-77floor extension78 Trunk Floor extension, used w/77 (fits Sedan Only) 35-36 92-35-78All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com45

applications THat FIT:FORDFORD CARS 37-401938Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128Tailpans fit under the lowerrear body section under thespare tire mount. They arestamped in the USA out of18-gauge steel and includecorrect body lines and raisedarea for bumper slots.193918 18A1961 61ALower front cowls fit from firewall to front door post. Lowerdoor post pillar is included with a formed hinge pocket.30, 31Sold as aset of innerand outer,specify LHor RH61B61D35624061C62B5455Toolbox compartments fit between the outer body panel and the maintrunk floor and is directly behind the outer skin of the tailpan.REPLACEMENT SHEETMETALIndex# Description Year Part No.18 Cowl, lower front, All Body Styles, specify L or R 37-38 92-37-1818 Cowl, lower front, fits Standard, specify L or R 1939 92-37-1818A Cowl, lower front, fits Deluxe, specify L or R 1939 92-39-18A18A Cowl, lower front, All Body Styles, specify L or R 1940 92-39-18A19 Inner Cowl structure 37-40 92-37-1930 Doorskin, lower inner and outer, fits 2 DR Sedan 37-40 92-37-30Cabriolet, Club Coupe, specify L or R31 Doorskin, lower inner and outer, fits Coupe 4DR Sedan 37-40 92-37-31(front door only) and Sedan Delivery, specify L or R35 Front Door Rear Post Reinforcement to Floor Brace (pair) 35-40 92-35-35(Originally made for 35-36 open cars. Can be used on37-40 for extra strength)40 Rocker Panels, fits 2DR Sedan & Coupes, pairs only 37-40 92-37-40(will work on front door of the 4DR Sedan)54 Rear fender lower front section, 8”, specify L or R 35-40 92-35-54(repairs fender where it mounts to running board)55 Rear qtr, lower frt sec., fits 2DR Sedans (long door) L or R 37-40 92-37-55Cabriolet and Club CoupeN.I. Rear qtr, lower frt sec., fits Coupe (short door) 37-40 92-37-56Business Coupe, specify L or RREPLACEMENT SHEETMETALIndex# Description Year Part No.61 Tailpan, fits ‘37 standard & Deluxe Humpback Sedan, 37-38 92-37-61and ‘38 Humpback Sedan, will not fit ‘38 Deluxe Sedans61A Tailpan, fits Standard & Deluxe Flatback Sedans 37 92-37-61A61B Tailpan, fits Coupe, Roadster & Cabriolet 37-38 92-37-61B61D Tailpan, fits 1938 Deluxe, 1939-40 Sedan 38-40 92-38-61D(will not fit ‘38 Standard Sedan)N.I. Tailpan with bumper slots, fits Ford Coupe 39-40 92-39-6162 Tailpan, fits Coupe (made without bumper slots) 39-40 92-39-6261C Toolbox compartment (trunk floor ext) 37-38 92-37-61Cfits all 1937 models, 1938 Standard Sedans, 1938 Standard & Deluxe Coupes62B Toolbox compartment, (trunk floor ext.) fits all Coupes 39-40 92-39-62B(small modification for ‘39 Deluxe & ‘40 Sedan required)N.I. Front floor pan kit w/ toe board & tunnel 35-40 92-35-70street rod style (flat floor), (kit of 6 pieces for left and right & center hump)(made to fit ‘Big block firewall’)N.I. Rear floor pan kit w/center hump, street rod style, 37-40 92-35-71(kit of 3 pieces)Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.46 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128FORD CARS 41-48FORD CARS 49-51applications THat FIT:FORD194118Tailpans include complete weatherstripchannel and side flanges. Rolls completelyunder body. Stamped in the USA out of18-gauge steel.92-41-30 (2-pc)636475881554, 5563A644445, 4692-41-7664A92-46-7647, 48REPLACEMENT SHEETMETALIndex# Description Year Mill Part#18 Cowl, lower front area that mounts front fender to body 41-48 92-41-18Includes lower door post area with hinge pocket All body style(2 piece set) specify L or R30 Doorskin, lower inner and outer, fits 2 DR Sedan 41-48 92-41-30(2 piece set) specify L or RN.I. Doorskin, lower inner and outer, fits Coupe (Short Door) 41-48 92-41-31(2 piece set) specify L or R44 Rocker box, front, extends from firewall to front door 41-48 92-41-44specify L or R45 Rocker box, center, extends from door post to door post 41-48 92-41-45fits 2 dr. Sedan, Coupe, Convertible, specify L or R46 Rocker box, center, extends from door post to door post 41-48 92-41-46fits 4 dr. Sedan & Business Coupe, specify L or R47 Rocker box, rear, extends from rear door post to 41-48 92-41-47rear fender, fits 2 dr. Sedan, Coupe, Convertible, specify L or R48 Rocker box, rear, extends from rear door post to 41-48 92-41-48rear fender, fits 4 dr. Sedan & Business Coupe, specify L or R54 Rear quarter, lower front section from door to rear fender 41-48 92-41-54fits 2DR Sedan and “Long door” Club Coupe, specify L or R55 Rear quarter lower front section, fits Business Coupe 41-48 92-41-5563 Tailpan, all body styles except wagons 41-46 92-41-63This tailpan is 9” tall and will also work on the late 47-48 even though thestock tailpan is only 4” tall. Can be used with bumpers.63A Toolbox compartment, all styles except wagons 41-46 92-41-63AIncludes a reinforcement plate for the two rear body mounts. In mid-46 thetoolbox was eliminated (varied depending on model and assembly plant)64 Tailpan, short style, w/weatherstrip channel 47-48 92-47-6476 Trunk floor w/toolbox compartment, (3 pcs), 41-46 92-41-76CNC formed from 18 ga. steel.76 Trunk floor w/o toolbox compartment, (5 pcs), 46-48 92-46-76CNC formed from 18 ga. steel.78L76REPLACEMENT SHEETMETALIndex# Description Year Mill Part#15 Transmisson cover w/extra clearance for newer 49-51 92-49-15style automatic transmissions24 Front fender, lower rear section, 12” H 49-51 92-49-24N.I. Doorskin, lower inner and outer, 2 pc. set, L or R 49-51 92-49-31N.I. Rocker panel, 2DR, factory style 49-51 92-49-3940 Rocker 2DR 49-51 92-49-4042 Rocker 4DR 49-51 92-49-4243 Rocker 2DR w/extension 49-51 92-49-43N.I. Inner rocker 49-51 92-49-4552 Upper rear wheel arch 49-51 92-49-5254 Rear quarter lower front section, 12” H 49-51 92-49-5456 Rear quarter lower rear section, 12” H 49-51 92-49-5664 Tailpan, factory style 49-51 92-49-6464A Tailpan, full roll pan style 49-51 92-49-64A75 Spare tire well 49-51 92-49-7576 Trunk floor rear section, 8” deep from wheelwell to 49-51 92-49-76wheelwell at rear of trunk.78 Trunk floor pan area, specify L or R 49-51 92-49-78N.I. Front floor brace, specify L or R 49-51 92-49-8688 Rear floor brace, Universal 49-51 92-49-8878RAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com47

applications THat FIT:FORDFORD CARS 52-54Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128FORD CARS 55-5640424352REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker, 2DR 52-56 92-52-4042 Rocker, 4DR 52-54 92-52-4243 Rocker, 2DR w/extension 52-54 92-52-4352 Upper rear wheel arch, universal 52-54 92-52-5257 Rear quarter lower rear sec, 12”Hx29”L 52-54 92-52-575756REPLACEMENT SHEETMETALIndex# Description Year Mill Part#22 Front fender lower rear section, 13”H 55-56 92-55-2225 Upper headlight cap 5”L 55-56 92-55-2540 Rocker, 2DR 52-56 92-52-4042 Rocker, 4DR 55-56 92-55-4243 Rocker, 2DR w/extension 55-56 92-55-4354 Rear quarter lower front sec., 22”Hx44”L 55-56 92-55-5456 Rear quarter lower rear sec., 19”Hx51”L 55-56 92-55-56N.I. Tailpan, fits all body styles 55-56 92-55-61N.I. Floor pan, front sections, specify L or R 55-56 92-55-71N.I. Floor pan, rear sections, specify L or R 55-56 92-55-72N.I. Toe board, specify L or R 55-56 92-55-7754Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.48 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128applications THat FIT:FORDFORD CARS 57-58282955, 55F, 56, 56F27A3557736862594043, 43F157969L53, 53F, 54, 54F8269R71L71R72L72R212-pc. set27BREPLACEMENT SHEETMETALIndex# Description Year Mill Part#15 Transmission Hump Cover 57-58 92-57-1521 Front fender lower rear sec., w/inner brace 57-58 92-57-21N.I. Front fender, rear sec, 13”H 57-58 92-57-2223 Front fender, front sec, 18”Hx27”L (also fits Edsel Pacer) 58 92-58-2326 Outer headlight housing 57 92-57-2627A Upper headlight mounting panel, precision stamped 58 92-58-27A27B Lower headlight mounting panel, precision stamped 58 92-58-27B28 Front fender upper headlight cap 57 92-57-2829 Front fender upper cap 58 92-58-2935 Lower front door post, includes lower hinge pocket 57-58 92-57-3540 Rocker panel, 2DR, factory style 57-58 92-57-40N.I. Rocker 4DR (fits Custom & Wagon, 57-58 92-57-42Edsel Pacer & Ranger Ex. Hardtop)N.I. Rocker 4DR Hardtop 57-58 92-57-42F(Fairlane, Edsel, Citation & Corsair)43 Rocker 2DR w/extension (fits Custom, stat/wag, 57-58 92-57-43Edsel Ranger & Pacer models Ex.Hardtop)43F Rocker 2DR w/exten. (fits Fairlane, Ranchero, 57-58 92-57-43FEdsel Citation & Corsair models)53 Rear qtr, lwr front sec, Custom 300, precision stamped 57-58 92-57-5353F Rear qtr, lwr front sec, Fairlane 500, precision stamped 57-58 92-57-53F54 Rear quarter lower front half 57-58 92-57-54(fits 2DR Custom Station Wagon & Ranchero)54F Rear quarter lower front half (2DR Fairlane) 57-58 92-57-54F55 Rear qtr lwr rear sec, Custom 300, precision stamped 57-58 92-57-5555F Rear qtr lwr rear sec, Fairlane 500, precision stamped 57-58 92-57-55F56 Rear quarter lower rear half 57-58 92-57-56(fits Custom, Station Wagon & Ranchero)56F Rear quarter lower rear half 57-58 92-57-56F(fits Fairlane, alter for retractable)57 Rear quarter lower rear section, 25’L x 13”H 57-58 92-57-57(fits Custom, Station Wagon & Ranchero)59 Rear quarter inner brace, univ. fits LH or RH side 57-58 92-57-5962 Tailpan 57 92-57-6268 Striker reinforcement (housing for plate light) 57-58 92-57-6869 Toe board, extends from floor pan to firewall 57-58 92-57-6971 Front floor pans, LH or RH (from toe board to rear of 57-58 92-57-71front seat) use with 92-57-15 to go from side to side of car72 Rear floor pans, LH or RH, includes center hump 57-58 92-57-7273 Floor brace, first row, universal 57-58 92-57-73N.I. Floor brace, second (center front) row, universal 57-58 92-57-74N.I. Floor brace, third (center rear) row, specify L or R 57-58 92-57-75N.I. Floor brace, forth (rear) row, universal 57-58 92-57-7679 Inner lower rear quarter panel, fits Custom 300, short w/b 57-58 92-57-79N.I. Inner lower rear quarter panel, fits Fairlane 500, long w/b 57-58 92-57-80N.I. Trunk floor outer side; fits Custom 300, short w/b 57-58 92-57-8182 Trunk floor outer side; fits Fairlane 500, long w/b 57-58 92-57-82All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com49

applications THat FIT:FORDFORD CARS 59FORD GALAXIE 64Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker, 2DR & also fits Edsel 59 92-59-4042 Rocker, 4DR 59 92-59-4243 Rocker, 2DR w/extension 59 92-59-4350 Rear quarter rear half, 27”Hx63”L 59 92-59-5054 Rear quarter lower front sec, 23”Hx41”L 59 92-59-54FORD GALAXIE 60REPLACEMENT SHEETMETALIndex# Description Year Mill part#40 Rocker, 2DR 64 92-64-4048A Dog leg, outer, 4DR 64 92-64-48A50 Rear quarter rear half, 21”H x 66”L 64 92-64-5054 Rear quarter lower front sec; 26”H x 40”L 64 92-64-5457 Rear quarter lower rear sec; 23”H x 40”L 64 92-64-57FORD GALAXIE 65REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Stamped rear qtr, lower rear half, 18”Hx66”L 65 92-65-56FORD GALAXIE 68REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker, 2DR 60-63 92-60-4042 Rocker, 4DR 60-63 92-60-4243 Rocker, 2DR w/extension 60-63 92-60-43FORD GALAXIE 61-63REPLACEMENT SHEETMETALIndex# Description Year Mill Part#54 Rear quarter, lower front half (2DR), 24”Hx37”L 68 92-68-5456 Rear quarter, lower rear half (4DR), 20”Hx64”L 68 92-68-56FORD CARS 69-72REPLACEMENT SHEETMETALIndex# Description Year Mill Part#25 Upper headlight panel, 27”L 63 92-63-2540 Rocker, 2DR 60-63 92-60-4042 Rocker, 4DR 60-63 92-60-4243 Rocker, 2DR w/extension 60-63 92-60-4348A Dog leg, outer 63 92-63-48A50 Rear quarter rear half, 24”Hx64”L 62 92-62-5050 Rear quarter rear half, 22”Hx66”L 63 92-63-5054 Rear quarter, lower front sec, 23”Hx34”L 62 92-62-54(does not have lower body line for ‘63 models)REPLACEMENT SHEETMETALIndex# Description Year Mill Part#48 Dog leg, 4DR 71-72 92-71-4850 Rear quarter, rear half, 26”H x 63”L 71-72 92-71-5054 Rear quarter, front half, 32”H x 33”L 71-72 92-71-5454 Rear quarter, lower front half, 24”H x 31”L 69-70 92-69-5456 Rear quarter, lower rear half, 19”H x 59”L 69-70 92-69-56Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.50 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128FORD FAIRLANE / RANCHERO 66-71FORD TORINO 68-71FORD FALCON 64-65applications THat FIT:FORD1966-1967Floor pans fit all yearsREPLACEMENT SHEETMETALIndex# Description Year Mill Part#50 Rear quarter rear half, 22”Hx43”L 64-65 99-64-50(Alter for St/wagon & Ranchero)57 Rear quarter rear sec, 22”Hx25”L 64-65 99-64-57(Alter for St/wagon & Ranchero)1968-1969FORD FOCUS 00-04REPLACEMENT SHEETMETALIndex# Description Year Mill Part#15 Torque box, except convertible 66-71 96-66-1521 Front fender lower rear section 66-67 96-66-2121 Front fender lower rear section, specify L or R 70-71 96-70-2131 Lower doorskin, 2DR, 8”H 66-67 96-66-3140 Rocker, 2DR 66-67 96-66-4048 Dog leg outer, 4DR, specify L or R 68-69 96-68-4850 Full quarter panel, fits 2DR Fairlane only 66-67 *96-66-5054 Rear quarter lower front sec, 2DR, 17”Hx37”L 68-69 96-68-54(Fairlane & Torino), specify L or R56 Rear quarter lower rear half 18”Hx54”L 68-69 96-68-56(Fairlane & Torino), specify L or R71 Floor pan, front sec., specify L or R 66-71 96-66-7172 Floor pan, rear sec., specify L or R 66-71 96-66-7273 Floor pan, toe board area, specify L or R 66-71 96-66-7379 Trunk filler panel, fits Fairlane only, specify L or R 66-67 96-66-79FORD FALCON 60-631970-1971REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Rocker panel, 2DR 00-04 245-98-40N.I. Rocker panel, 4DR 00-04 245-98-42N.I. Rear wheel arch, 2DR 00-04 245-98-51N.I. Rear wheel arch, 4DR Sedan 00-04 245-98-53N.I. Rear wheel arch, 4DR Hatchback 00-04 245-98-54N.I. Rear wheel arch, Wagon 00-04 245-98-55FORD MAVERICK 70-77MERCURY COMET 71-77REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker 2DR, also fits Ranchero 60-63 99-60-4050 Rear quarter rear half 22”Hx43”L 60-63 99-60-50(Except Station wagon & Ranchero)54 Rear quarter lower front half 15”Hx42”L 60-63 99-60-54(Except Station wagon and Ranchero)57 Rear quarter rear sec 22”Hx34”L 60-63 99-60-57All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.REPLACEMENT SHEETMETALIndex# Description Year Mill Part#50 2DR Rear quarter, 32”Hx63”L (cut down to fit 4DR) 70-77 44-70-50Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com51

applications THat FIT:FORDMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128FORD MUSTANG 64-66DASH TOPcovers fit right over existingdash, makes yourdash look new again.DT-420DT-402Description Year Mill Part #Dashtop cover 64-65 DT-420Dashtop cover 66 DT-402WEATHERSTRIPDescription Year Part No.R & L Molded Door Seal made w/molded ends, 65-66 LM-10fits 2-Door Hardtops & ConvertiblesR & L Roof rail seal, made w/spliced ends, fits Hardtop 65-66 RR-6900R & L Roof rail seal, made w/spliced ends, fits Fastback 65-66 RR-6901Trunk Seal Kit, fits Coupe65-66 TK-51-A-14Trunk Seal Kit, fits Fastback 65-66 TK-51-B-11GAS TANKS96 Gas tank 16 gallon, without drain plug 64-68 93-64-9697 Gas tank 16 gallon with drain plug 64-68 93-64-97TAIL LAMPSTurn Signal Lens 64-66 G-902REPLACEMENT SHEETMETAL - FRONTIndex# Description Year Mill Part#00 Bumper, front 64-66 93-64-00N.I. Bumper bracket outer rear 64-66 93-65-00N.I. Bumper bracket inner front 64-66 93-64-0101 Lower valance below bumper 64-66 93-65-0102 Upper splash panel below grille 65-66 93-64-0204 Radiator support 64-66 *93-64-04N.I. Export brace, painted 64-70 93-64-07N.I. Front frame crossmember 64-65 93-64-09N.I. Hood 64-66 *93-64-1011 Battery Tray 64-66 93-64-1113 Outer shock tower (Front suspension bumper bracket) 65-66 93-65-1314 Torque box, convertible 64-68 93-64-14N.I. Torque box, hardtop 64-68 93-64-14BN.I. Front fender splash shield, front 64-66 93-64-1516 Front fender splash shield, rear 64-66 93-64-16N.I. Monte Carlo Bar, curved, painted 64-66 93-64-17N.I. Monte Carlo Bar, straight, painted 64-66 93-64-17AN.I. Monte Carlo Bar, curved, chrome 64-66 93-64-17B20 Front fender 64-66 *93-64-2022 Front fender, lower rear sec.11”H 64-66 93-64-2224 Cowl side panel 64-68 93-64-24N.I. Partial inner cowl patch 64-68 93-64-2527 Inner front fender, lower rear sec 64-66 93-64-27N.I. Headlight inner bracket 65-68 93-65-2858 Front wheelhouse, rear section 65-66 93-65-5873 Fender apron, houses battery, RH only 64-66 93-64-7384 Inner frame floor support, fits Convertible 65-68 93-64-8485 Inner frame floor support, fits Coupe 65-68 93-64-85N.I. Inner frame patch, fits convertible 64-68 93-64-8687 Front frame extension, outer (use with 93-64-88) 64-70 93-65-8788 Front frame extension, inner (use with 93-65-87) 64-70 93-64-88Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.52 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128applications THat FIT:FORDFORD MUSTANG 64-66REPLACEMENT SHEETMETAL -DOORSKINS AND ROCKERSIndex# Description Year Mill Part#30 Doorskin, full height 64-66 *93-64-3031 Lower doorskin, 8”H 64-66 93-64-3134 Doorshell 64-65 *93-64-3440 Rocker panel 64-67 93-64-4044 Inner rocker, convertible 64-68 93-64-44REPLACEMENT SHEETMETAL - FLOOR PANSIndex# Description Year Mill Part#67 Full floor pan, complete, fits Convertible 64-68 *93-64-67N.I. Full floor pan, complete, fits Coupe & Fastback 64-68 *93-64-6869 Floor pan, complete half 64-73 *93-64-6970 Front floor pan, long 21”Wx39”L 64-73 93-64-7071 Front floor pan, short 21”Wx23”L 64-73 93-64-7172 Rear floor pan, 21”x21” 64-73 93-64-72N.I. Rear floor extension, fits hardtop, alter for conv. 64-68 93-64-72AN.I. Seat reinforcement, fits Convertible 64-68 93-64-7477 Floor toeboard, 18”H 64-68 93-64-7794 Seat platform fits standard Hardtop 64-68 93-64-9499 Drain hole cover 64-73 93-64-99REPLACEMENT SHEETMETAL - REARIndex# Description Year Mill Part#50 Rear quarter skin, extends 1” over crown, fits Coupe 64-66 *93-64-50N.I. Rear quarter skin, Convertible 64-66 *93-64-50AN.I. Full Rear quarter panel, factory style, Fastback only 64-66 *93-64-50B52 Rear wheel arch, ext to door, 14Hx45”L 64-66 93-64-5256 Rear quarter, rear sec 12”H 64-66 93-64-56N.I. Rear bumper 64-66 93-64-6063 Rear body panel 65-66 93-65-6364 Rear splash panel, single exhaust 65-66 93-65-64(Cut hole for back up lamps when required)65 Rear splash panel, dual exhaust 65-66 93-65-6566 Rear quarter extension, die cast 64-66 93-65-6675 Outer rear wheelhouse 64-66 93-64-7576 Inner rear wheelhouse, modify fits Convertible 64-70 93-64-7678 Inner rear quarter, lower rear 64-70 93-64-7879 Trunk floor side w/lower inner rear quarter 64-70 93-64-7980 Trunk rear corner w/rain gutter 64-66 93-64-80N.I. Spare tire hold down kit (3 pcs), w/hold down plate, 65-67 93-65-81wing nut & J-bolt82 Rear frame rail rear section 64-70 93-64-8289 Trunk cross member 64-70 93-64-8995 Trunk lid, fits Coupe and Convertible 64-66 *93-64-9595A Trunk lid, fits Fastback64-66 *93-64-95AAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com53

applications THat FIT:FORDMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128FORD MUSTANG 67-682024731522272504148406DASH TOPSDashTop covers fit right over existing dash,makes your dash look new again.DT-429Description Year Mill Part #Dashtop, fits Mustang 67-68 DT-429WEATHERSTRIPMolded door seals, 2-Door Hardtops & Fastback, R & L 67-68 LM-11Made with molded ends.Roof rail seals, Hardtops, R & L, made with spliced ends 67-68 RR-6902Roof rail seals, Fastbacks, R & L, made with spliced ends 67-68 RR-6903GAS TANKSN.I. Gas tank 16 gal, w/o drain plug 64-68 93-64-96N.I. Gas tank 16 gal w/drain plug 64-68 93-64-978885REPLACEMENT SHEETMETAL - FRONTIndex# Description Year Mill Part#N.I. Bumper, front 67-68 93-67-00N.I. Upper valance between grille & bumper 67-68 93-67-01N.I. Bumper bracket inner front 67-68 93-67-02N.I. Bumper bracket outer front 67-68 93-67-0304 Radiator support 67-68 *93-67-0406 Front valance, lower 67-68 93-67-06N.I. Export brace, painted 64-70 93-64-07N.I. Battery tray 67-68 93-67-11N.I. Battery retainer bracket 67-70 93-67-1214 Torque box, convertible 64-68 93-64-14N.I. Torque box, hardtop 64-68 93-64-14B15 Front fender splash shield 67-68 93-67-1520 Front fender 67 *93-67-2020 Front fender 68 *93-68-2022 Front fender lower rear sec, 12”H 67-68 93-67-2224 Cowl side panel 64-68 93-64-2425 Inner cowl vent repair panel, 16”W x 14”L 64-68 93-64-2527 Inner front fender, lower rear sec 67-68 93-67-2773 Fender apron, houses battery, RH only 67-68 93-67-7384 Inner frame floor support, fits convertible 65-68 93-64-8485 Inner frame floor support, fits coupe 65-68 93-64-85N.I. Inner frame patch, fits convertible 64-68 93-64-8687 Front frame extension, outer (order with 93-64-88) 64-70 93-65-8788 Front frame extension, inner (order with 93-65-87) 64-70 93-64-8887Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.54 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128applications THat FIT:FORDFORD MUSTANG 67-6893-67-497530764093-68-49REPLACEMENT SHEETMETAL - DOORS& ROCKERS44Index# Description Year Mill Part#30 Doorskin, full outer 67-68 *93-67-3040 Rocker panel 64-67 93-64-4044 Inner rocker, fits convertible 64-68 93-64-4450576164898279REPLACEMENT SHEETMETAL - FLOORIndex# Description Year Mill Part#67 Full floor pan complete, 1 pc; fits Convertible 64-68 *93-64-67N.I. Full floor pan complete, 1 pc; fits Coupe & Fastback 64-68 *93-64-6869 Floor pan complete half, specify L or R 64-73 *93-64-6970 Front floor pan, long 21”Wx39”L, specify L or R 64-73 93-64-7071 Front floor pan, short 21”Wx23”L, specify L or R 64-73 93-64-7172 Rear floor pan, 21”x21”, specify L or R 64-73 93-64-72N.I. Rear floor extension, fits hardtop, alter for conv. 64-68 93-64-72AN.I. Seat reinforcement, fits convertible, specify L or R 64-68 93-64-7477 Floor toeboard, 18”H, specify L or R 64-68 93-64-7794 Seat platform fits standard hardtop, specify L or R 64-68 93-64-9499 Drain hole cover 64-73 93-64-9995REPLACEMENT SHEETMETAL - REARIndex# Description Year Mill Part#49 Rear quarter, factory style, fits coupe only 67 *93-67-4949 Rear quarter, factory style, fits coupe only 68 *93-68-4950 Rear quarter, 26”H, fits coupe only 67-68 *93-67-50N.I. Upper rear wheel arch 12”H x 43”L 67-68 93-67-5257 Rear quarter lower rear sec, 13”H 67-68 93-67-57N.I. Rear bumper 67-68 93-67-6061 Tail light panel 67-68 93-67-6164 Rear splash panel, single exhaust 67-68 93-67-64N.I. Rear body panel, dual exhaust 67-68 93-67-6575 Outer rear wheelhouse 67-68 93-67-75N.I. Complete inner & outer wheelhouse, convertible 67-68 *93-67-75C76 Inner rear wheelhouse, modify fits convertible 64-70 93-64-7678 Inner rear quarter, lower rear 64-70 93-64-7879 Trunk floor w/lower inner rear quarter 64-70 *93-64-79N.I. Spare tire hold down kit (3 pcs), w/hold down plate, 65-67 93-65-81wing nut & J-bolt82 Rear frame rail, original type 64-70 93-64-8289 Trunk cross member 64-70 93-64-8995 Trunk lid, fits Fastback 67-68 *93-67-9578All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com55

applications THat FIT:FORDFORD MUSTANG 69-7030*Our floor pans are exact for64-68 Mustang. Your 69-70 floorwill have a slightly different beadarea on the front floor area but thepans are dimensionally the same.5056Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Front bumper 69-70 93-69-0002 Lower front panel, valance 69 93-69-0203 Lower front panel, valance 70 93-70-0304 Upper front panel 69 93-69-04N.I. Front cross member, under radiator support 69-70 93-69-0607 Export brace, painted 64-70 93-64-07N.I. Battery retainer bracket 67-70 93-67-1230 Outer doorskin, full height 69-70 *93-69-30N.I. Rocker panel 69-70 93-69-4049 Rear quarter, fits Hardtop and Convertible 69 *93-69-4949 Rear quarter, fits Hardtop and Convertible 70 *93-70-4950 Rear quarter, fits Fastback (cut out scoop for Mach 1) 69-70 *93-69-5052 Upper rear wheel arch, 10”H x 32”L 69-70 93-69-5256 Rear quarter, rear sec 11”H, fits Fastback only 69-70 93-69-5657 Rear quarter, rear sec 11”H, fits Coupe & Conv. 69-70 93-69-57N.I. Rear bumper 69-70 93-69-6061 Tail light panel 69 93-69-6162 Tail light panel 70 93-70-6264 Rear valance w/o exhaust openings 69-70 93-69-6465 Rear valance with exhaust openings 69-70 93-69-6567 Full floor pan complete, 1 pc; fits Convertible 64-73 *93-64-67N.I. Full floor pan complete, 1 pc; fits Coupe & Fastback 64-73 *93-64-6869 Floor pan complete half 64-70 *93-64-6970 Front floor pan, long 21”W x 39”L 64-70 93-64-7071 Front floor pan, short 21”W x 23”L 64-70 93-64-7172 Rear floor pan, 21” x 21” 64-70 93-64-7275 Outer rear wheelhouse 69-70 93-69-7576 Inner rear wheelhouse, modify for convertible 64-70 93-64-7678 Inner rear quarter, lower rear 64-70 93-64-7879 Trunk floor w/lower inner rear quarter 64-70 93-64-7982 Rear frame rail, original type 64-70 93-64-8287 Front frame extension, outer, use w/93-64-88 64-70 93-65-8788 Front frame extension, inner, use w/93-64-87 64-70 93-64-8889 Trunk cross member 64-70 93-64-8999 Drain hole cover 64-73 93-64-9987DASH TOPSDashTop covers fitright over existingdash, makes yourdash look new again.DT-403DT-404Description Mill Part #Dashtop, fits 69-70 Mustang with A/CDT-403Dashtop, fits 69-70 Mustang without A/CDT-40488GAS TANKN.I. Gas Tank, 20 gal, with drain plug 69 93-69-110N.I. Gas Tank, 22 gal, with drain plug 70 93-70-11189Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.56 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128applications THat FIT:FORDFORD MUSTANG 71-73*Our floor pans are exact for 64-68 Mustang.Your 71-73 floor will have a slightly differentbead area on the front floor area but the pansare dimensionally the same.500140REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Front bumper 71-73 93-71-0001 Radiator support 71-73 *93-71-01N.I. Front fender 71-72 *93-71-2022 Front fender, lower rear section 71-73 93-71-2231 Lower doorskin, 9”H 71-73 93-71-3140 Rocker panel 69-70 93-71-4050 Rear quarter, fits Fastback 71-73 *93-71-5051 Rear quarter, fits Coupe & Convertible 71-73 *93-71-5154 Rear quarter lower front sec 22”Hx42”L 71-73 93-71-5457 Rear quarter, rear sec, 15”H 71-73 93-71-57N.I. Rear bumper 71-73 93-71-6061 Tail light panel 71-73 93-71-6165 Rear valance with exhaust openings 71-73 93-71-6567 *Full floor pan complete, 1 pc; fits Convertible 64-73 *93-64-67N.I. *Full floor pan complete, 1 pc; fits Coupe & Fastback 64-73 *93-64-6869 Floor pan complete half, original ribbing 71-73 *93-71-6970 *Frt. floor pan, long 21”Wx39”L, not original ribbing 64-73 93-64-7071 *Frt. floor pan, short 21”Wx23”L, not original ribbing 64-73 93-64-7172 Rear floor pan, 21”x21”, not original ribbing 64-73 93-64-72N.I. Outer rear wheelhouse 71-73 93-71-75N.I. Inner rear wheelhouse 71-73 93-71-7678 Inner rear quarter, lower rear sec 71-73 93-71-7879 Trunk floor (must be shipped freight) 54”W x 36”L 71-73 *93-71-79N.I. Trunk lid, Hardtop & Convertible 71-73 *93-71-95N.I. Trunk lid, Fastback 71-73 *93-71-95A99 Drain hole cover 64-73 93-64-9961DASH TOPDashTop covers fit right over existing dash,makes your dash look new again.7879Description Year Mill Part #Dashtop, fits Mustang with A/C 71-73 DT-413GAS TANKSN.I. Gas Tank, 20 gallon 71-73 93-71-110N.I. Straps for 20 gallon gas tank, 93-71-110 71-73 93-71-115All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com57

applications THat FIT:FORDFORD MUSTANG 74-78Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128FORD TAURUS 86-9148REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Lower outer doorskin, 8”H 74-78 93-74-3150 Rear quarter panel (alter for fastback) 74-78 *93-74-50(Relocate gas fill hole on 74 models)N.I. Front floor pan, 21”W x 30”L 74-78 93-74-71DOOR HANDLESN.I. Outside door handle, chrome. L or R 74-78 90-73-381REPLACEMENT SHEETMETALIndex Description Year Mill Part#40 Rocker Panel, 4DR 86-91 95-86-4048 Dog leg, 4DR, 12”H 86-91 95-86-48FORD TAURUS 92-95DASH TOPSDescription Year Mill Part #Dashtop, fits over existing dash, fits Mustang 74-78 DT-410FORD MUSTANG 79-93REPLACEMENT SHEETMETALIndex# Description Year Mill PartN.I. Radiator Support 90-93 *93-90-0520 Fender 79-90 *93-79-2020 Fender 91-93 *93-91-2040 Rocker panel 79-93 93-79-4050 Rear quarter panel, fits hatchback 79-93 *93-79-5051 Rear quarter, fits coupe and convertible 79-93 *93-79-5170 Floor pans, full half, 21”W x 53”L 79-93 93-79-70GAS TANKSGas tank, 15.4 gal, pump on engine 4/81-86 93-81-110Gas tank, pump on tank 83-91 93-83-111DASH TOPSDashTop covers fit right over existingdash, makes your dash look new again.Description Year Mill Part #Dashtop cover, fits Mustang 79-86 DT-412WEATHERSTRIPBelt weatherstrip, Sedan inner door belts, L & R side, 81-93 93-81-101also fits 80-86 convertible, 2 pc kitBelt weatherstrip, Sedan, outer door belts, L & R side 87-93 93-87-102Belt weatherstrip, Convertible inner/outer, L & R, 4pc kit 87-93 93-87-104Quarter window belt weatherstrip, inner/outer, L/R, 4pc kit 83-93 93-83-105Door seal kit, Hardtop, L & R side, 2pc kit 79-83 93-79-107Door seal kit, Convertible, L & R side, 2pc kit 79-83 93-79-108Plastic window molding set, Hatchback, L & R side, 2pc kit 87-93 93-87-110Windshield seal, Convertible, L & R side, 2pc kit 89-93 93-89-111Door reveal molding kit, L & R side 87-93 93-87-113“A” Pillar post weatherstrip set, convertible, L & R, 2pc kit 83-86 93-83-115“B” Pillar post weatherstrip set, convertible, L & R, 2pc kit 88-93 93-88-116REPLACEMENT SHEETMETALIndex# Description Year Mill Part#01 Front valance, Exc. SHO 92-95 95-92-0102 Stone deflector, Exc. SHO 92-95 95-92-0203 Front bumper cover assembly, Exc. SHO 92-95 95-92-03w/o corner lamp hole, w/valance (assembled) paint to matchN.I. Header panel, Exc. SHO 92-95 95-92-0520 Front fender, Exc. SHO 92-95 *95-92-2060 Rear bumper cover, fits Sedan only, Exc. SHO 92-95 *95-92-6061 Rear bumper cover, fits Wagon only 92-95 *95-92-6191 Headlamp assembly, 92-93 Taurus except SHO 92-95 95-92-91also fits 94-95 Taurus GL models92 Side marker lamp assembly, Exc. SHO 92-95 95-92-92GAS TANKN.I. Gas tank, 16 gallons 4/88-95 95-88-110N.I. Gas tank, 18.5 gallons 88-95 95-88-111N.I. Straps for 16 and 18.5 gallon tanks, set 88-95 95-88-115FORD TAURUS 96-07MERCURY SABLE 96-0540REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Full rocker panels 96-07 95-96-40N.I. Rear wheel arch upper (will fit 96-99 if modified) 00-07 95-00-51N.I. Dog leg, 4DR 96-07 95-96-55Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.58 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128FORD THUNDERBIRD 58-60FORD THUNDERBIRD 89-97applications THat FIT:FORD24REPLACEMENT SHEETMETALIndex# Description Year Mill Part#24 Front fender rear half, 25”H x 36”L 58-60 94-58-2440 Rocker, universal 58-60 94-58-4043 Rocker, 2DR with extension 58-60 94-58-4354 Rear quarter lower front sec, 20”H x 33”L 58-60 94-58-5456 Rear quarter lower rear sec 18”H x 65”L 58-60 94-58-56GAS TANKN.I. Gas tank, 20 gallon with drain plug 58-60 94-58-110N.I. Straps for Gas tank 58-60 94-58-115WEATHERSTRIP2-Door Molded Door Seals Hardtops & Convertibles, R & L 58-60 LM-15Steel cores where needed, made of molded spongeMolded Roof Rail Seals, 6-Piece Set, R & L. 58-60 RR-3320Beautifully detailed with molded ends and steel cores.Molded Trunk Seal Kit 58-60 TK-42-16FORD THUNDERBIRD 64-6640REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Front fender, fits Cougar/T-Bird Std./LX 89-95 *72-89-20N.I. Front fender, fits T-Bird Super Coupe 89-95 *72-89-21N.I. Front fender, fits T-Bird & Cougar 96-97 *72-96-2224 Front wheelhouse (splash shield) 89-95 72-89-24N.I. Lower doorskin, 2DR 89-97 72-89-3140 Rocker panel, 2DR 89-97 72-89-40FORD TORINO 66-71 SEE FORD FAIRLANEFORD TORINO 72-76REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Rear quarter, 2DR, 26”H x 75”L 72-76 *96-72-50FORD ESCORT 91-02ALSO FITS: MERCURY TRACERREPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Rocker, 2DR, 65”L (also fits Mercury Tracer) 91-96 95-91-40N.I. Rocker, 4DR (also fits Mercury Tracer) 91-96 95-91-42N.I. Rocker, 4DR, 64”L (also fits Mercury Tracer) 97-02 95-97-42FORD TEMPO 84-91ALSO FITS: MERCURY TOPAZREPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Rocker, 4DR 84-91 99-84-42REPLACEMENT SHEETMETALIndex# Description Year Mill Part#22 Front fender lower rear sec, 13”H 64-66 94-64-2240 Rocker panel 64-66 94-64-4049 Rear quarter lower half 64-66 94-64-49(measures approx. 3” above wheel)50 Rear quarter, 2DR 64-66 *94-64-5071 Front floor pan half sec 64-66 94-64-7175 Outer rear wheelhouse 64-66 94-64-7579 Rear quarter inner rear sec 64-66 94-64-79GAS TANKSN.I. Gas tank, 16.5 gallon, with drain plug 1/64-3/27/64 94-64-110N.I. Gas tank, 16.5 gallon 3/27/64-6694-64-111N.I. Straps for 16.5 gallon tank 64-66 94-64-115FORD CONTOUR 95-00ALSO FITS: MERCURY MYSTIQUEREPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Rocker panel, 4DR, 71.5”L 95-00 961-95-42FORD CROWN VICTORIA 92-97ALSO FITS: MERCURY GRAND MARQUISREPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Rocker panel, 4DR, 69”L 92-97 223-92-40All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com59

applications THat FIT:HONDAHONDA ACCORD 86-89Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128HONDA ACCORD 94-974251 54REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Front fender 86-89 213-86-2042 Rocker panel, 4DR 86-89 213-86-4251 Rear wheel arch area, 2DR 86-89 213-86-5154 Rear wheel arch area, 4DR 86-89 213-86-54HONDA ACCORD 90-93COUPE / SEDAN / WAGONREPLACEMENT SHEETMETALIndex# Description Year Mill Part#05 Radiator support assemby, 4 cylinder only 94-97 *211-94-0505A Radiator support assembly, 6 cylinder only94-97 *211-94-05A14 Grille chrome/black w/moulding., V-6 only 94-95 211-94-1415 Grille, mat Black w/moulding, 4 cylinder 96-97 211-96-1520 Front fender, 4 cylinder only 94-97 211-94-2026 Fender liner 94-97 211-94-2654 Rear wheel arch, 4DR sedan 94-97 211-94-545454REPLACEMENT SHEETMETALIndex# Description Year Mill Part#05 Radiator support assembly 90-93 *211-90-0511 Grille moulding, chrome 90-91 211-90-1112 Grille, black 90-91 211-90-1213 Grille assembly, chrome/black w/mouldings 92-93 211-92-1320 Front fender 90-93 211-90-2054 Rear wheel arch, 4DR 90-93 211-90-54Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.60 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128HONDA CIVIC 88-91HONDA CIVIC 96-00applications THat FIT:HONDA405154514154REPLACEMENT SHEETMETALIndex# Description Year Mill Part#51 Rear wheel arch, 3DR Hatchback 96-01 212-96-51N.I. Rear wheel arch, 4DR Sedan 96-00 212-96-54HONDA CRX 85-91REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Front fender, Hatchback 88-91 212-88-20N.I. Front fender, Sedan 88-91 212-88-2140 Rocker panel, 2DR Hatchback, 69-1/2” overall length 88-91 212-88-4041 Rocker panel, 4DR Sedan, 66” to front fender, 68”overall 88-91 212-88-4151 Rear wheel arch area, Hatchback, 2DR 88-91 212-88-5154 Rear wheel arch area, Sedan, 4DR 88-91 212-88-54HONDA CIVIC 92-9551REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Header panel 85-87 215-85-02N.I. Front bumper reinforcement, DX/SI 88-89 215-88-08N.I. Front bumper reinforcement, HF 88-89 215-88-09N.I. Front bumper reinforcement, DX/SI 90-91 215-90-08N.I. Front bumper cover 88-89 *215-88-14N.I. Front bumper cover 90-91 *215-90-15N.I. Front fender 88-91 *215-88-2051 Rear wheel arch 88-91 212-88-515440REPLACEMENT SHEETMETALIndex# Description Year Mill Part#20 Front fender, fits Sedan only w/moulding holes 92-95 212-92-2021 Front fender, fits Hatchback/Coupe/Sedan w/o mldg. holes 92-95 212-92-2122 Front fender, fits Hatchback/Coupe only w/mldg holes 92-95 212-92-2224 Fender liner, front, fits Civic only, L or R 92-95 212-92-2440 Rocker, 2DR Hatchback/Coupe 92-95 212-92-40N.I. Rocker, 4DR Sedan 92-95 212-92-42N.I. Rocker panel, 4DR Sedan, factory style 92-95 212-92-4351 Rear wheel arch, extends back to bumper, 92-95 212-92-51fits 2DR Hatchback, alter at rear for 2DR Coupe54 Rear wheel arch, 4DR 92-95 212-92-54All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com61

applications THat FIT:MAZDA/MERCEDESMAZDA 626 93-02REPLACEMENT SHEETMETALIndex# Description Year Mill PartN.I. Rocker panel 93-97 246-93-40N.I. Rocker panel, 4DR 98-02 246-98-42N.I. Rear wheel arch, Sedan 98-02 246-98-54Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128MERCEDES 220/8, 220D, 230/4, 230/8,240D, 250/8, 250C, 280C, 300DCHASSIS TYPE 114 & 115 68-76MAZDA MIATA 89-05244-89-51 244-99-51REPLACEMENT SHEETMETALIndex# Description Year Mill Part51 Rear wheel arch with lower front section 89-98 244-89-5151 Rear wheel arch with lower front section 99-05 244-99-51MAZDA PROTEGE SEDAN 99-03MAZDA PROTEGE 5 HATCHBACK 02-03REPLACEMENT SHEETMETALIndex# Description Year Mill PartN.I. Rear wheel arch, Sedan 99-03 248-99-54N.I. Rear wheel arch, Hatchback 02-03 248-02-51REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker, 4DR 68-76 262-68-4050 Rear quarter lower half, 4DR 68-76 262-68-50DASHTOPSDashTop covers fitright over existingdash, makes yourdash look new again.Description Year Mill Part #Dashtop, fits Mercedes, Chassis 114/115 w/11” speaker 68-76 DT-702Dashtop, fits Mercedes, Chassis 114/115 w/9” speaker 68-76 DT-703MERCEDES 280S, 300SE, 300SD, 450SE,450SEL, 450SEL 6.9CHASSIS TYPE 116 73-80Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.62 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comREPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker 4DR, 76”L (except SEL) 73-80 264-73-4051 Rear wheel arch, 4DR 73-80 264-73-51DASH TOPSDashTop covers fitright over existing dash,makes your dash looknew again.Description Year Mill Part #Dashtop, fits Mercedes, Chassis 116 73-80 DT-707Dashtop, fits Mercedes, Chassis 116 w/climate sensor 73-80 DT-708Dashtop, fits Mercedes, Chassis 116 w/climate sensor & speakers 73-80 DT-709Dashtop, fits Mercedes, Chassis 116 w/speakers 73-80 DT-710All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128MERCEDES 350SL/SLC, 380SL/SLC,450SL/SLC, 560SLCHASSIS TYPE 107 73-89applications THat FIT:MERCEDES/LINCOLN/MERCURYLINCOLN/MERCURY 49-56921-49-40REPLACEMENT SHEETMETALIndex# Description Year Mill Part#51 Rear wheel arch, 2DR 73-89 267-71-51DASH TOPSDashTop covers fit right overexisting dash, makes yourdash look new again.Description Year Mill Part #Dashtop, fits Mercedes, Chassis 107 w/o climate sensor 73-89 DT-705MERCEDES 300SD, 380SE/SEL, 500SEL 81-85300, 350, 420, 560 SEL/SDL 86-91CHASSIS TYPE 126REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Fender, front 81-91 *264-81-20MERCEDES E-CLASSCoupe/Sedan 86-95Wagon 87-95CHASSIS TYPE 124REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Fender, front 86-95 *265-86-20N.I. Rocker panel, 4DR 86-95 265-86-42N.I. Rear wheel arch 86-95 265-86-54MERCEDES C-CLASS 94-00CHASSIS TYPE 202REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Radiator support upper tie bar 94-00 266-94-01N.I. Radiator support assembly (includes upper tie bar) 94-00 *266-94-02N.I. Crossmember support assembly 94-00 266-94-03N.I. Front fender 94-00 *266-94-20N.I. Rear wheel arch 94-00 266-94-51MERCEDES E-CLASSSedan & Wagon 96-02CHASSIS TYPE 210REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Rear wheel arch, 4 DR Sedan & Wagon 96-02 267-96-54921-49-42921-49-5092-52-4092-52-4292-52-52REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker panel, 2DR, fits Lincoln & Mercury 49-51 921-49-4042 Rocker panel, 4DR, fits Lincoln & Mercury 49-51 921-49-42N.I. Rocker panel, 2DR, factory style, fits Lincoln & Mercury 49-51 921-49-4350 Quarter panel, 2DR, 22”H x 81”L, fits Lincoln & Mercury 49-50 *921-49-5040 Rocker panel, 2DR, fits Mercury 52-56 92-52-4042 Rocker panel, 4DR, fits Mercury 52-56 92-52-4252 Rear wheel arch, 2/4DR, fits Mercury, 9”H x 36”L 52-56 92-52-52MERCURY 65-66REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Rocker panel, 2DR 65-66 96-66-40MERCURY CAPRI 79-8640REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Doorskin, outer lower 9” 79-86 200-79-3140 Rocker panel, 2DR 79-86 200-79-40MERCURY COMET 71-77FORD MAVERICK 70-77REPLACEMENT SHEETMETALIndex# Description Year Mill Part#50 2DR Rear quarter, 32”Hx63”L (cut down to fit 4DR) 71-77 44-70-50All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com63

applications THat FIT:MERCURYMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128MERCURY COUGAR 67-7382851101 04252440REPLACEMENT SHEETMETALIndex# Description Year Mill Part#01 Radiator support 71-73 *93-71-0104 Radiator support 67-68 *93-64-0411 Battery tray 67-70 93-67-11N.I. Battery hold down bracket 67-70 93-67-12N.I. Torque box, specify L or R 67-70 93-64-14BN.I. Front fender lower rear secton 67-68 72-67-2224 Cowl side panel 67-68 93-64-2425 Partial inner cowl patch 67-68 93-64-2540 Rocker panel 67-68 93-64-40N.I. Rocker panel 69-70 93-69-4067 Full floor pan, complete, fits Convertible ‘67-’68 67-68 *93-64-67modify rocker area for ‘69-’73 modelsN.I. Full floor pan, complete, fits Coupe ‘67-’68 67-68 *93-64-68modify rocker area for ‘69-’73 models69 Floor pan, complete half, up to center hump 67-70 *93-64-6970 Front floor pan, long 21”W x 39”L 67-70 93-64-7071 Front floor pan, short 21”W x 23”L 67-70 93-64-7172 Rear floor pan, 21” x 21” 67-70 93-64-7273 Fender apron, houses battery, RH only 67-68 93-64-7377 Floor pan toeboard area, 18”H 67-70 93-64-7778 Trunk filler, inner rear quarter lower rear section 67-70 93-64-78(trim to fit 71-73)79 Trunk floor, 54” x 38”, lengthen 5” to fit Cougar 71-73 *93-71-7982 Rear frame rail rear section 67-70 93-64-8285 Inner frame floor support, fits Coupe 67-68 93-64-8594 Seat platform fits standard Hardtop 67-68 93-64-9499 Drain hole coverlets 67-70 93-64-99DASH TOPSDashTop covers fit right over existing dash,makes your dash look new again.Description Year Mill Part #Fits Mercury Cougar 71-73 DT-423737978Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.64 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128MERCURY COUGAR 89-9724REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Front fender, fits Cougar/T-Bird Std./LX 89-95 *72-89-20N.I. Front fender, fits T-Bird & Cougar 96-97 *72-96-2224 Front wheelhouse (splash shield) 89-95 72-89-24N.I. Lower doorskin, 2DR 89-97 72-89-3140 Rocker panel, 2DR 89-97 72-89-4040applications THat FIT:MERCURY/OLDSMOBILEOLDSMOBILE88/98 CUSTOM CRUISER, RWD 80-90REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Hood latch 78-88 50-73-13N.I. Rocker panel, 2DR 80-90 53-77-40N.I. Rocker panel, 4DR 80-90 53-77-42OLDSMOBILE CUTLASS 64-674042MERCURY GRAND MARQUIS 92-97ALSO FITS: FORD CROWN VICTORIA5157REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker panel, 4DR 92-97 223-92-40OLDSMOBILE ACHIEVA 92-984042REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker panel, 2DR 92-98 650-92-4042 Rocker panel, 4DR 92-98 650-92-42OLDSMOBILE EIGHTY EIGHT, LSS, REGENCY 92-9998 REGENCY FWD 91-96REPLACEMENT SHEETMETALIndex# Description Year Mill Part#42 Rocker panel, 4DR 91-99 67-91-42404267REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Dash top, metal 66-67 55-66-13N.I. Dash top reinforcement 66-67 55-66-14N.I. Front fender lower rear sec, 16”H 66-67 64-66-22N.I. Rocker, 2DR, factory style 64-67 55-64-3940 Rocker, 2DR 64-67 55-64-4042 Rocker, 4DR 64-67 55-64-42N.I. Rocker panel w/extension, 2DR 66-67 55-64-4351 Rear wheel arch 66-67 64-66-5157 Rear quarter lower rear section 66-67 64-66-57N.I. Panel behind rear window to trunk, 2DR 66-67 64-66-6567 Inner rear wheelhouse 64-67 55-64-6770 Floor pan half, 70”Lx30”W, L or R 64-67 *55-64-70N.I. Front floor pan, 31”L x 28”W, L or R 64-67 55-64-71N.I. Rear floor pan, 31”L x 30”W, L or R 64-67 55-64-72N.I. Floor pan under rear seat, 30L x 25”W, L or R 64-67 55-64-72AN.I. Trunk floor center, 45”L x 21”W 64-67 66-64-73N.I. Trunk floor side, 45”L x 23”W 64-67 66-64-74N.I. Trunk floor brace 64-67 55-64-75N.I. Floor to firewall panel extension 64-67 55-64-7677 Front floor brace, rocker to rocker 64-67 55-64-7778 Middle floor brace, rocker to rocker 64-67 55-64-78N.I. Rear floor brace, rocker to rocker 64-67 55-64-79N.I. Front floor brace, partial outer section, L or R 64-67 55-64-83N.I. Middle floor brace, partial outer section, L or R 64-67 55-64-84N.I. Trunk filler, inner lower rear quarter section 64-65 55-64-80N.I. Trunk filler, inner lower rear quarter section 66-67 55-66-80N.I. Trunk floor complete 64-67 *64-66-91WINDOW CRANKWindow crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383GAS TANKSN.I. Gas tank, exc station wagon 66-67 68-64-110777870All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com65

applications THat FIT:OLDSMOBILEMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128OLDSMOBILE CUTLASS 68-72747375302077, 7850, 5131394022654255-68-408471837055-64-4264-68-65Supreme/Convertible S/442REPLACEMENT SHEETMETALIndex Description Year Mill Part#N.I. 4-Speed shift hump w/o console 68-72 55-68-07N.I. 4-Speed shift hump w/console 68-72 55-68-08N.I. Armrest, black plastic, paint to match 68-72 53-68-14N.I. Armrest base mouldings, stainless steel, one pair 68-72 53-68-1720 Front Fender 70-72 *64-70-2022 Front fender lower rear sec 19”H 68-69 64-68-2222 Front fender lower rear sec 15”H w/offset 70-72 64-70-2230 Full outer doorskin, 2DR 70-72 *64-70-3031 Lower front doorskin, 2DR 68-69 64-68-3131 Lower front doorskin, 2DR 70-72 64-70-3139 Rocker, factory style, 2DR 68-72 55-68-3940 Rocker, 2DR with ext., slip on style 68-72 55-68-4042 Rocker, 4DR 66-72 55-64-42N.I. Inner rocker panel 68-72 55-64-4550 Rear quarter panel, 2DR, 28”tall 68-69 *64-68-5050 Rear quarter panel, fits 2DR (Cutlass + 442 only), 28”tall 70-72 *64-70-5051 Rear quarter panel, fits 2DR Supreme & conv., 28”tall 70-72 *64-70-51N.I. Quarter panel, 2DR, factory style, fits convertible 70-72 *64-70-52N.I. Trunk lid, Convertible 70-72 *64-70-61N.I. Trunk lid, Supreme 70-72 *64-70-62N.I. Trunk lid, 442 70-72 *64-70-6365 Outer rear wheelhouse 68-69 64-68-6565 Outer rear wheelhouse 70-72 64-70-65N.I. Inner rear wheelhouse, except convertible 70-72 55-68-68N.I. Rear window to trunk panel 70-72 64-70-6970 Floor pan half, 63” x 31W 68-72 *55-68-70N.I. Full floor pan, 1 piece design w/3 braces attached 68-72 *55-68-70A55-68-74Index Description Year Mill Part#71 Front floor pan, 31”L x 28”W 68-72 55-68-7173 Trunk floor, center only 68-72 55-68-7374 Trunk floor, side only, specify L or R 68-72 55-68-7475 Trunk floor brace, specify L or R 68-72 55-68-75N.I. Floor to firewall extension, 17”L x 24”W, specify L or R 64-72 55-64-7677 Front floor brace, rocker to rocker 66-72 55-64-7778 Middle floor brace, rocker to rocker 66-72 55-64-78N.I. Rear floor brace, rocker to rocker 68-72 55-68-78AN.I. Filler panel, inner rear quarter, lower rear section 68-69 64-68-79N.I. Filler panel, inner rear quarter, lower rear section 70-72 64-70-79N.I. Trunk floor, one piece design, 39”L x 56”W 68-72 *55-68-80N.I. Trunk floor front cross member 68-69 55-64-81N.I. Toolwell, Station Wagon only 68-72 55-68-8183 Front floor support outer section, specifyL or R 66-72 55-64-8384 Middle floor support outer section, specify L or R 66-72 55-64-84N.I. Battery tray w/L6 or 350 V8 68-72 64-68-91N.I. Battery tray w/400 or 455 V8 68-72 64-68-91AN.I. Battery retainer 68-72 53-65-92WINDOW CRANKWindow crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383GAS TANKSGas tank, exc. station wagon 68-69 68-68-111Gas tank, with evap. emiss. control, Exc S/W 70-72 68-70-113Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.66 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128OLDSMOBILE CUTLASS 73-77applications for:OLDSMOBILEOLDSMOBILE CUTLASS SUPREME 78-88REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Rocker panel, 2DR, 57”L 73-77 55-73-4050 Rear quarter lower half (alter bumper area for 73 models) 73-75 *64-73-5050 Rear quarter, 30”Hx65”L 76-77 *64-76-5071 Front floor pan, 22”W x 31”L, L or R 73-77 55-73-71N.I. Rear floor pan, 22”W x 26”L, L or R 73-77 55-73-7273 Trunk floor center, 23”W x 36”L 73-77 55-73-7374 Trunk floor sides, 19”W x 36”L 73-77 55-73-7485 Fuel tank mounting brace 73-77 55-73-85N.I. Battery retainer 73-77 53-65-92GAS TANKN.I. Gas tank, w/o filler neck, 2 or 4 DR 73-77 55-73-111N.I. Gas tank, w/filler neck, 2 DR 76-77 *55-73-110OLDSMOBILE CUTLASS CIERA 82-96REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Rocker panel, 4DR 82-96 801-82-42OLDSMOBILE CUTLASS SUPREME FWD 88-97REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Rocker panel, 2DR, Coupe/Conv. Factory style 88-97 802-88-40also fits Sedan 90-97REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Hood latch 78-88 50-73-1331 Lower doorskin, 10”H 81-88 64-81-31N.I. Inner door bottom, 2DR 81-88 59-81-3240 Rocker, 2DR 78-88 59-78-4050 Rear quarter, 2DR 27”H 78-80 *64-78-5050 Rear quarter, 2DR full 81-88 *64-81-5070 Floor pan half, 25” x 65” 78-88 *55-78-70N.I. Battery hold down bracket 78-88 55-78-98N.I. Battery tray 78-88 55-78-99WEATHERSTRIPDoor weatherstrip, 4DR, front doors, pair 78-88 64-78-96Door weatherstrip, 4DR, rear doors, pair 78-88 64-78-97GAS TANKSGas tank,w/filler neck, fastback, 78-87 *64-78-110rear wheel drive, 2 & 4 DR exc. S.W.Gas tank, w/o filler neck, 78-88 55-78-111fastback & notchback, 2 & 4 DR exc. S.W.Gas tank, FWD, w/o fuel injection 82-85 64-82-114Gas tank, FWD, with fuel injection 84-93 64-84-115OIL PANSDescription Oil Pan Gasket1978, V8, 350, 5.7 Liter 85-208 85-1041980, V8, 350, 5.7 Liter 85-203 85-1041981-82, V8, 267, 4.4 Liter; 305, 5 Liter 85-203 85-1041988, V-6, 173 2.8 Liter 85-201 85-103DOOR HANDLESDescription Year Mill Part#Inside door handle, chrome 78-88 55-78-380Outside door handle, chrome 78-88 55-78-381Window crank handle w/black knob, universal 78-88 53-58-380Window crank handle w/clear knob, universal 78-88 53-58-383OLDSMOBILE FIRENZA 82-88SEE CHEVROLET CAVALIEROLDSMOBILE OMEGA 68-79SEE CHEVROLET NOVAAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com67

applications that fit:PLYMOUTHMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128PLYMOUTH BARRACUDA 67-74REPLACEMENT SHEETMETALIndex Description Year Mill Part#N.I. Front valance w/o light holes fits 70, 72-74 73-70-01(will not fit 71 with light holes in valance)N.I. Grille & headlight bezel mldg. assembly, 7pc. set 70 73-70-07A11 Battery tray 70-74 74-70-1112 Front wheelhouse upper section 67-69 77-67-1216 Firewall, side panel 70-74 74-70-16N.I. Firewall panel complete 70-74 74-70-17N.I. Front fender bracket 70-74 74-70-18N.I. Front fender 70 *73-70-20N.I. Front fender (except ‘Cuda’ model) 71 *73-71-20N.I. Front fender ‘Cuda’ model with gills holes 71 *73-71-21N.I. Front fender 72-74 *73-72-2022 Front fender lower rear sec. 67-69 73-67-2222 Front fender lower rear sec. 70-74 73-70-2224 4-Speed tunnel hump, for auto to manual conversion 67-74 77-67-24(modify for 1970 models)27 Heat shield between trunk floor and exhaust 70-74 73-70-27N.I. Inner fender cover plates, one pair 70-74 74-70-2931 Doorskin, lower outer 8”H 70-74 73-70-3140 Rocker, 2DR with extension 67-69 73-67-4040 Rocker 70-74 74-70-4050 Rear quarter, no lamp hole 67 *73-67-5050 Rear quarter, round lamp hole 68 *73-68-5050 Rear quarter, rectangular lamp hole 69 *73-69-50N.I. Rear quarter, factory style 70-71 *73-70-4950 Rear quarter, die formed, 31”H 70-71 *73-70-50N.I. Rear quarter, factory style 72-74 *73-72-4950 Rear quarter, die formed, 31”H 72-74 *73-72-5054 Rear quarter, lower front section, 12”H 70-74 73-70-5457 Rear quarter, lower rear section, 16”H 70-74 73-70-57Index Description Year Mill Part#60 Trunk lid 70-74 *73-70-6061 Rear valance with dual exhaust 70-74 73-70-6162 Rear valance without dual exhaust 70-74 73-70-62N.I. Tail panel 70-74 73-70-63N.I. Tail panel corner bracket 70-74 73-70-6465 Panel behind rear window to trunk 70-74 73-70-65N.I. Tailpipe tip hanger bracket 70-74 74-70-65RN.I. Front floor pan complete, side to side, 47”L x 58”W 70 *74-70-70N.I. Front floor pan complete, side to side, 47”L x 58”W 71-74 *74-71-7070 Front floor pan half section, specify L or R 67-69 77-67-7071 Rear floor pan half section, specify L or R 67-69 77-67-7172 Front floor pan half section, 26”Wx26”L, specify L or R 70-74 74-70-7273 Rear floor pan half section, 28”W x 38”L, specify L or R 70-74 74-70-7371 Floor pan to factory seam behind front seat, 26” x 49” 70-74 74-70-7175 Outer rear wheelhouse 70-74 73-70-7576 Trunk floor half, specify L or R 70-74 74-70-76N.I. Trunk floor center, bottom of tire well 67-69 77-67-7676A Spare tire hold-down bracket 67-69 77-67-76AN.I. Trunk floor half, 26”W x 32”D 67-69 77-67-7777 Trunk rear cross member 70-74 74-70-77(fits between rear bumper and trunk)N.I. Trunk weatherstrip gutter, specify L or R 70-74 73-70-7879 Trunk filler side panel 70-74 73-70-7981 Rear frame rail 70-74 74-70-81N.I. Rear floor pan shock absorber crossmember, univ 70-74 74-70-91N.I. Rear shock absorber cross member bracket 70-74 74-70-91AN.I. Rear seat floor brace, specify L or R 70-74 74-70-92N.I. Front floor support brace, front 70-74 74-70-94N.I. Front floor support brace, rear 70-74 74-70-94BN.I. Fuel tank mounting brace 70-74 74-70-96Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.68 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128applications that fit:PLYMOUTH16 2470-74 WEATHERSTRIPDescription Year Part No.Molded door seal, 2-Door Hardtops, R & L 70-74 LM-23-AMade with steel cores and proper clips. A veryaccurate and detailed reproduction, Replaces OEM #2895478/9Trunk Seal Kit, fits Fastback, made like original 67-69 TK-2323with 2 different profilesTrunk Seal Kit70-74 TK-64-A-14DASH TOPS & INTERIOR PANELS2760DashTop covers fit right overexisting dash, makes yourdash look new again.Description Year Mill Part #Dashtop, fits E body, w/o A/C 70-74 DT-908Dashtop, fits E body, with A/C 70-74 DT-909Kick Panels, Front, black, pair 70-74 DT-97Door Panels, black, pair 70-74 DT-980BDoor Panels, white, pair 70-74 DT-980WInterior rear quarter, fits hardtop, black, pair 70-74 DT-981BInterior rear quarter, fits hardtop., white, pair 70-74 DT-981WInterior rear quarter, fits conv., black, pair 70-74 DT-983BInterior rear quarter, fits conv., white, pair 70-74 DT-983WReplacement seat back, black, pair 70 DT-98BReplacement seat back, white, pair 70 DT-98WFRAME PATCHESTorsion MountDT-908Sub Frame(T-Mount Forward)10 Gauge72L72R• Custom-formed, heavy gauge steel• Cap design fits over existing frame rail• Strengthens weak unibody designFull Front Frame Cap13 Gauge77Sub Frame Front(Radiator Support Back)Caps area atSub-Frameand Torsion BarMount“T” Frame Cap76A13 Gauge13 GaugeDescription with “A” Dim. Year Part No.LH Torsion Mount, 22” 70-74 74-70-82-LRH Torsion Mount, 19-1/2” 70-74 74-70-82-RSub Frame Front, 30-1/2” 70-74 74-70-83Sub Frame, 34” 70-74 74-70-87Full Front Frame Cap, 61” 70-74 74-70-84T” Frame Cap 70-74 74-70-85All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com69

applications that fit:PLYMOUTHMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128PLYMOUTH BELVEDERE/SATELLITEROADRUNNER/GTX 66-7023034086-70-506078REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Radiator support bracket 68-70 85-68-0303 Grille set with headlight bezels, Roadrunner 69 85-69-03N.I. Torsion bar anchor crossmember 66-70 86-66-04N.I. Front frame rail, specify L or R 66-70 85-66-0911 Battery tray 66-69 86-66-1111 Battery tray 70 74-70-1119 Front inner wheelhouse 68-70 86-68-1922 Front fender lower rear section, Exc. 70 Superbird 68-70 86-68-2222 Front fender lower rear section, fits Superbird 70 761-68-2223 Inner front wheel shield 68-70 85-68-2324 4-Speed tunnel hump, for auto to manual conversion 68-70 85-66-24N.I. Inner upper fender to cowl, specify L or R 66-70 85-66-27N.I. Upper cowl top 66-70 85-66-28N.I. Inner fender cover plates, one pair 66-70 85-66-2940 Rocker 68-70 761-68-40N.I. Rear quarter, factory style 68 *86-68-49N.I. Rear quarter, factory style 69 *86-69-49N.I. Rear quarter, factory style 70 *86-70-4950 Rear quarter skin 68 *86-68-5050 Rear quarter skin 69 *86-69-5050 Rear quarter skin with scoop 70 *86-70-5054 Rear quarter, lower front section, 18”H 68-70 86-68-5456 Rear quarter, lower rear section, 14”H 68-70 86-68-5660 Rear bumper, chrome, except station wagon 68 86-68-6065 Rear window to trunk panel 68-70 86-68-6567 Convertible top reinforcement, rear corner above deck lid 68-70 761-68-67N.I. Rear cross rail assembly (5 pcs. includes: center rail, 68-70 85-68-68outers & extensions).N.I. Rear window corner channel reinforcement 68-70 761-68-68N.I. Floor pan rear side rail support (to inner sill) L or R 68-70 85-66-68N.I. Outer rear cross rail, specify L or R 68-70 85-68-68EN.I. Bucket seat brackets, 4 piece set 66-70 85-66-6970 Front floor 3/4 length to factory seam, 56” Lx28”W 68-70 *85-66-70N.I. Front floor pan complete, side to side, one piece 68-70 *85-68-71N.I. Full floor pan, factory style 68-70 *86-68-71A72 Front floor pan half, 24”L x 26”W 66-70 85-66-7274 Rear floor pan half, 29”L x 22”W 66-70 85-66-74Index# Description Year Mill Part#N.I. Rear floor pan complete, side to side, one piece 68-70 *85-68-7575 Outer rear wheelhouse 68-70 86-68-7576 Trunk floor pan half, stamped, 29”W x 41”L 68-70 86-68-7676A Trunk floor half, 51-1/2”L, specify L or R 68-70 86-68-76A77 Trunk floor side ext. w/inside lower quarter 68-70 86-68-7778 Trunk rear cross member (between bumper & trunk) 68-70 86-68-78N.I. Trunk cross member extension 68-70 86-68-78AN.I. Trunk floor complete one piece 68-70 *86-68-7979 Trunk floor side ext. w/inside lower qtr. 66-67 185-66-7980 Trunk floor brace 68-70 85-66-8081 Gas tank strap support, weld under trunk floor, univ 68-70 85-68-8183 Gas tank brace, front (2 required) 68-70 85-68-83N.I. Gas tank brace, center 68-70 85-68-84N.I. Rear floor pan shock absorber crossmember 68-70 86-68-92N.I. Rear frame rail assembly 68-70 86-68-93N.I. Front floor support brace, front, univ (2 required) 68-70 85-68-94N.I. Front floor support brace, rear, univ (2 required) 68-70 85-68-95N.I. Spare tire hold down bracket 66-70 85-68-97N.I. Rear spring front hanger bracket, specify L or R 68-70 85-66-9899 Rear spring front hanger bracket to rail brace, L or R 68-70 85-66-99WEATHERSTRIPDescription Year Part No.Door Seals, 2-Door Hardtops and Conv., R & L, Made 66-67 LM-23-Bw/correct ends and clips & soft skin covered sponge. Perfect reproductionDoor Seals, 2-Door Hardtops, R & L, Made with steel cores 68-70 LM-23and white clips plus molded ends.Roof rail seal, 2-Door hardtops (no posts) 68-70 RR-4001-ATrunk Seal Kit, Made like original w/2 different profiles. 66-67 TK-2326Trunk Seal Kit, Made like original w/2 different profiles. 68-70 TK-2320DASH TOPDescription Year Mill Part #Dashtop, fits Roadrunner/GTX/Belvedere/Satellite 69-70 DT-910Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.70 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128applications that fit:PLYMOUTHPLYMOUTH SATELLITE/ROADRUNNER 71-74678180FRAME PATCHESTorsion Mount9910 GaugeSub Frame Front(Radiator Support Back)70Full Front Frame Cap83• Custom-formed, heavy gauge steel• Cap design fits over existing frame rail• Strengthens weak unibody design13 GaugeSub Frame(T-Mount Forward)“T” Frame CapCaps area at Sub-Frameand Torsion Bar Mount76AREPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Radiator support bracket, RH 71-74 74-70-06R11 Battery tray 71-72 74-70-1112 Front wheelhouse upper front section 71-74 74-70-12N.I. Front wheelhouse upper rear section 71-74 74-70-13N.I. 4-Speed tunnel hump, auto to manual conversion 71-74 74-70-1522 Front fender lower rear sec, 16”H 73-74 86-73-22N.I. Door jamb piller, specify L or R 71-72 743-71-24N.I. Outer rear wheelhouse, specify L or R 71-74 743-71-25N.I. Inner rear wheelhouse, specify L or R 71-74 743-71-2640 Rocker, 2DR 71-74 86-71-40N.I. Quarter panel complete, 2DR, specify L or R 71 *743-71-49N.I. Quarter panel complete, 2DR, specify L or R 72 *743-72-49N.I. Quarter panel to crown line, 2DR, specify L or R 71 *743-71-50N.I. Quarter panel to crown line, 2DR, specify L or R 72 *743-72-50N.I. Upper rear wheel arch area, specify L or R 71-72 743-71-51N.I. Rear quarter, lower front section, 2DR, specify L or R 71-72 743-71-54N.I. Rear quarter, lower rear section, 2DR, specify L or R 71 743-71-57N.I. Rear quarter, lower rear section, 2DR, specify L or R 72 743-72-5770 Front floor pan complete, side to side, 47”L x 58”W 71-74 *74-71-7072 Front floor pan, 26”W x 26”L, specify L or R 71-74 74-70-72N.I. Trunk floor half, specify L or R 71-73 85-71-76N.I. Spare tire hold down bracket 71-74 77-67-76AN.I. Trunk weatherstrip gutter, specify L or R 71-74 743-71-77N.I. Rear floor pan, specify L or R, will fit 71&74 if modified 72-73 85-72-77N.I. Trunk floor outer drop off (outer side) specify L or R 71-74 743-71-79N.I. Gas tank brace 71-74 85-71-80N.I. Rear panel to rear crossmember extension, spec L or R 71-74 743-71-82N.I. Rear frame rail 71-74 85-71-93N.I. Rear spring shackle support 71-74 85-71-94N.I. Front floor support brace, front 71-74 74-70-94N.I. Front floor support brace, rear 71-74 74-70-94BN.I. Torsion bar anchor crossmember 70-72 74-70-98DASH TOPDashTop covers fit rightover existing dash, makes yourdash look new again.Description Year Mill Part #Fits Roadrunner/Satellite 71-74 DT-90713 GaugeRearShackleMount13 Gauge13 GaugePLYMOUTH SUNDANCE 87-94PLYMOUTH DUSTER 92-94ALSO FITS: DODGE SHADOW 87-94Description with “A” Dim. Year Part No.LH Torsion Mount, 21-3/4” 66-74 85-66-82-LRH Torsion Mount, 19-3/4” 66-74 85-66-82-RSub Frame Front, 35-1/2” 66-74 85-66-83Sub Frame, 25-1/2” 66-74 85-66-87Full Front Frame Cap, 61” 66-74 85-66-84“T” Frame Cap 66-74 85-66-85Rear Shackle Mount 66-74 85-66-864240REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker, 2DR, 62”L 87-94 178-87-4042 Rocker, 4DR, 62”L 87-94 178-87-42All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com71

applications that fit:PLYMOUTHPLYMOUTH 49-5240Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128PLYMOUTH SCAMP/VALIANT 67-76DUSTER 70-7642REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker, 2DR, specify L or R 49-52 185-49-4042 Rocker, 4DR, specify L or R 49-52 185-49-42PLYMOUTH BELVEDERE 64FURY 63-64SATELLITE 6512264023 2477-70-5076-70-50REPLACEMENT SHEETMETALIndex# Description Year Mill Part#11 Cowl panel, left side only 63-65 185-63-11N.I. Cowl panel, lower left side only 63-65 185-63-12N.I. Shifter tunnel 63-65 185-63-1415 Inner front wheel shield 63-65 185-63-1521 Front fender lower rear section 63-65 185-64-2151 Rear wheel arch area 63-65 185-63-5157 Rear quarter lower rear section 63-65 185-63-5772 Front floor pan half 63-65 185-63-72N.I. Floor pan under front seat, 20”L x 31”W 63-65 185-63-7374 Rear floor pan half 63-65 185-63-7480 Trunk filler, Inner rear quarter lower rear section 63-65 185-63-80PLYMOUTH RELIANT/DODGE ARIES 81-89REPLACEMENT SHEETMETALIndex# Description Year Mill Part#42 Rocker, 4DR 81-89 77-81-42775770REPLACEMENT SHEETMETALIndex# Description Year Mill Part#12 Inner front wheel shield 67-76 77-67-1223 Front fender lower rear sec, fits Duster 70-76 77-70-2324 4-Speed tunnel hump, for auto to manual conversion 67-76 77-67-2426 Front fender innder splash shield, Dart/Duster 67-75 77-67-2640 Rocker, 2DR 67-76 77-67-4050 Rear quarter, fits 2DR Valiant/Scamp 70-71 *77-70-50(alter marker light hole to fit 1972-76 models)50 Rear quarter, fits 2DR Duster/Dart Sport/Demon 70-71 *76-70-5057 Rear quarter, lower rear section, 18”H x 44”L 70-76 76-70-5770 Front floor pan section 67-76 77-67-70N.I. Rear floor pan section 67-76 77-67-7176 Trunk floor center sec, bottom of tire well 67-76 77-67-7677 Trunk floor half, 26”W x 32”D, specify L or R 67-74 77-67-77N.I. Spare tire hold-down bracket 67-71 77-67-76A79 Trunk filler panel, fits Duster/Demon 70-74 77-70-79N.I. Battery tray, fits Duster/Demon 67-74 77-67-917976Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.72 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128PONTIAC BONNEVILLE RWD 82-86LeMANS/GRAND AM 78-81applications that fit:PONTIACPONTIAC GRAND PRIX 78-87404070 LH 70 RHREPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker panel, 2DR 78-86 55-78-4070 Floor pan half, 25”W x 65”L, specify L or R 78-86 *55-78-70N.I. Battery hold down bracket 78-86 55-78-98N.I. Battery tray 78-86 55-78-99PONTIAC BONNEVILLE FWD 87-9970 LH 70 RHREPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Hood latch 78-87 50-73-1340 Rocker, 2DR 78-87 59-78-4070 Floor pan half, 25” x 65” 78-87 *55-78-70N.I. Battery hold down bracket 78-87 55-78-98N.I. Battery tray 78-87 55-78-99DOOR HANDLESInside door handle, chrome 78-87 55-78-380Outside door handle, chrome 78-87 55-78-381Window crank handle w/black knob, universal 78-87 53-58-380Window crank handle w/clear knob, universal 78-87 53-58-38342REPLACEMENT SHEETMETALIndex# Description Year Mill Part#42 Rocker panel, 4DR, fits Bonneville only 87-99 67-91-42PONTIAC GRAND AM 92-98PONTIAC GRAND PRIX COUPE 88-96& SEDAN FWD 90-96REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker, 2DR Coupe, 70”L 88-96 36-88-40(also fits Sedan FWD 90-96)PONTIAC GRAND PRIX 97-03650-92-4040650-92-42REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker panel with extension, 2DR 92-98 650-92-4042 Rocker panel, 4DR 92-98 650-92-42REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker, 2DR, factory style, specify LH or RH 97-03 665-97-4042 Rocker, 4DR, universal 97-03 665-97-4242All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com73

applications that fit:PONTIACMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128PONTIAC FIREBIRD 67-69031115A15B52-67-30REPLACEMENT SHEETMETALIndex# Description Year Mill Part#00 Radiator support 67-69 *52-67-0001 Lower valance 67 38-67-0102 Lower valance 68 38-68-0203 Lower valance 69 38-69-03N.I. Front Spoiler mount, 3 pc. kit 67-68 52-67-02BN.I. Front Spoiler mount, 3 pc. kit 69 52-69-02DN.I. Outer drip rail molding set (6 pcs) 67-69 52-67-0811 Hood scoop inserts, fits Firebird 400, Includes two 67-69 38-67-11ornaments; trim out opening for Ram Air models13 Upper dash panel (metal) 67 52-67-1313 Upper dash panel (metal) 68-69 52-68-13N.I. Armrest base, black plastic 68-69 53-68-14N.I. Cowl upper inner panel 68-69 52-67-1515A Cowl side panel, specify L or R 67-69 52-67-15A15B Cowl vent grille panel 67-69 52-67-15BN.I. Cowl panel lower, Coupe with A/C, LH only 67-69 52-67-15CL16 Heater adaptor plate, big block 67-69 52-67-16N.I. Armrest base mouldings, stainless steel, pair 68-69 53-68-17N.I. Kick panel support 67-69 52-67-18N.I. Front fender 67-68 *38-67-2022 Front fender lower rear sec, 13”H 67-68 52-67-2222 Front fender lower rear sec, 16”H 69 38-69-22N.I. Front fender brace, pair 67-69 52-67-23N.I. Front fender, front extension 67 52-67-24N.I. Front fender, front extension 68 38-68-24N.I. Front shock support & bolt plate 67 52-67-27N.I. Front shock support & bolt plate 68-69 52-68-2730 Outer doorskin, full 67 *52-67-3030 Outer doorskin, full 68 *52-68-3030 Outer doorskin, full 69 *52-69-3031 Doorskin, lower 8” 67-68 52-67-3152-68-30 52-69-30Index# Description Year Mill Part#31 Doorskin, lower 8” 69 52-69-31N.I. Door jamb vent grille w/o flap, univ 67-69 52-67-36N.I. Door jamb vent grille with flap and backing, univ 67-69 52-67-36A39 Rocker panel, factory type, USA made 67-69 52-67-3940 Rocker with extension 67-69 52-67-40N.I. Inner rocker, factory style 67-69 52-67-44N.I. Inner rocker assembly w/kick panel support 67-69 52-67-4550 Rear quarter panel, w/louvers, w/o marker light holes 67 *38-67-5050 Rear quarter panel, with louvers & marker light holes 68 *38-68-5050 Rear quarter panel, w/”Bird” marker light holes 69 *38-69-5050A Rear quarter panel, factory style 67 *38-67-50A50A Rear quarter panel, factory style 68 *38-68-50A50A Quarter panel, factory style, w/”bird” marker light hole 69 *38-69-50AN.I. Rear wheel arch, upper 11”H x 29”L 67-68 52-67-5255 Rear quarter, front sec. 11”H 67-68 52-67-5557 Rear quarter, rear sec. 12”H 67-68 52-67-5759 Tail light panel 67-68 38-67-5960 Rear bumper, chrome 67-68 38-67-6060 Rear bumper, chrome 69 38-69-60N.I. Inner rear valance 67-68 52-67-6265 Panel behind rear window, fits coupe only 67-69 52-67-65N.I. Panel behind rear window, coupe only, factory style 67-69 52-67-66N.I. Trunk latch mounting bracket 67-69 52-67-69B69W Trunk weatherstrip gutter, 3 pc set67-69 52-67-69W70 Floor pan half, 19”Wx55”L 67-69 52-67-7070A Floor pan full half, includes center seam, 82”L x 27”W 67-69 *52-67-70A70B Full floor pan w/center, one piece67-69 *52-67-70Bincludes bracesN.I. Floor pan front half section, 27”L x 19”W 67-69 52-67-7172 Floor pan rear half section 67-69 52-67-72N.I. Floor pan ‘X’ member brace, convertible 67-69 52-67-72ASpecify LH (Drivers Side) or RH (Passenger Side) When Ordering.74 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128Index# Description Year Mill Part#N.I. Seat frame support, coupe, specify L or R 67-69 52-67-72BN.I. Under rear seat brace, specify L or R 67-69 52-67-72D73 Toe board 67-69 52-67-73N.I. Firewall to floor brace 69 52-69-73B74 Rear shock tower patch LH 67 52-67-7474 Rear shock tower patch LH 68-69 52-68-7474 Rear shock tower patch RH 67-69 52-67-7475 Outer rear wheelhouse, exc convertible 67-68 52-67-7575 Outer rear wheelhouse, exc convertible 69 52-69-7576 Inner rear wheelhouse, exc. LH side on 67 models 67-69 52-67-76N.I. Inner rear wheelhouse LH only for 1967 67 52-67-76AN.I. Floor pan under rear seat 67-69 52-67-7778 Trunk floor center, 29” x 37” 67-68 52-67-7878 Trunk floor center, 29” x 37” 69 52-69-78N.I. Trunk floor complete, 61W x 47 Deep 67 *52-67-78AN.I. Trunk floor complete 68 *52-68-78A79 Trunk floor outer sec w/inner lower quarter 67-68 52-67-7979 Trunk floor outer sec w/inner lower quarter 69 52-69-7980 Trunk floor upper left side, 27” x 13” 67-68 52-67-8081 Frame rail 67-69 52-67-8182 Trunk reinforcement 67-69 52-67-82N.I. Inner trunk to tail pan brace, univ. (4 required) 67-68 52-67-83N.I. Trunk floor brace 69 52-69-8586 Floor pan drain hole cover, steel 67-69 52-67-86N.I. Front seat bracket 67-69 52-67-87N.I. Rear seat bracket 67-69 52-67-8891 Battery tray 67-69 52-67-91N.I. Battery retainer 67-81 53-65-9296 Front wheelwell moulding 67-68 52-67-9697 Rear wheelwell moulding 67-68 52-67-9797 Rear wheelwell moulding 69 52-69-9738-67-50A38-69-50Aapplications that fit:PONTIAC38-68-50A59WINDOW CRANK HANDLESWindow crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383GAS TANKSGas Tank 67-68 52-67-110Gas tank with filler neck 69 *52-69-110Straps for gas tanks 67-69 52-67-11570A LH70A RH38-67-6038-69-6069WWEATHERSTRIPMolded door seals, Hardtop and Convertible, L & R 67 LM-22Molded door seals, Hardtops and Convertibles, L & R 68-69 LM-22-ATop roof rail seals with header seal. 67-69 RR-1500Convertible only, 5 piece molded set. Includes all right and left side top rail seals,also has clips installed into header seal. Made with steel cores as per original.Roofrail weatherstrip w/molded ends, Hardtop, pair 67 52-67-101Conv. pillar post weatherstrip w/molded ends, pair 67 52-67-102Roofrail weatherstrip w/molded ends, Hardtop, pair 68-69 52-68-101Conv. pillar post weatherstrip w/molded ends, pair 68-69 52-68-102Trunk Seal Kit 67-81 TK-46-1573 LH 73 RH8079DASH TOPSDT-214DT-215DashTop covers fit rightover existing dash, makesyour dash look new again.70 LH 70 RHDescription Year Mill Part #Pontiac Firebird 67 DT-214Pontiac Firebird 68 DT-215All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.7870BBold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com75

applications that fit:PONTIACPONTIAC FIREBIRD, TRANS AM 70-81Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128PONTIAC FIREBIRD, TRANS AM 82-9261REPLACEMENT SHEETMETALIndex# Description Year Mill Part#11 Battery tray 70-81 38-71-1121 Front fender lower rear section, 18” H 70-81 38-70-2140 Rocker with extension 70-81 52-70-4043 Rocker panel, factory style 70-73 52-70-4350 Rear quarter 70-73 *38-70-5050 Rear quarter 74-81 *38-74-5057 Rear quarter, lower rear sec. 10”H 74-81 38-74-5761 Tail panel 74-78 38-74-61N.I. Trunk lid 70-81 *52-70-65N.I. Rear deck filler panel (between window & trunk lid) 70-81 52-70-6669 Floor pan half, 57”L x 21”W, L or R 70-74 52-70-69N.I. Floor pan half with center hump, 77”L x 27”W 70-74 *52-70-69Awill fit 75-81 if modify for catalytic converter brace. Made in USA70 Floor pan half, 49”L x 21”W, L or R 75-81 52-70-7071 Front floor pan half, 23”L x 18”W, L or R 70-76 52-70-7172 Rear floor pan half, 26”L x 18”W 70-76 52-70-7275 Outer rear wheelhouse 70-81 38-70-7578 Trunk floor, center section 70-73 52-70-7878 Trunk floor, center section 74-81 52-74-7879 Trunk filler panel, inner rear quarter area L or R 70-81 38-70-7981 Rear frame rail (specify L or R) 70-73 52-70-81N.I. Rear frame rail (specify L or R) 74-81 52-74-82N.I. Battery retainer 67-81 53-65-92OIL PANSDescription Oil Pan Gasket1977, V8, 305, 5 Liter 85-208 85-1041978-79, V8, 305, 350 85-208 85-1041980-85, V8, 305, 5.0 Liter 85-203 85-104GAS TANKSDescription Year Mill Part#Gas tank w/o filler neck, w/EEC 70-73 52-70-110& with three external vent pipesGas tank w/o filler neck 74-81 54-73-111Straps for gas tanks, pair 74-81 52-74-115DOOR & WINDOW CRANK HANDLESInside door handle, chrome 75-81 35-82-382Outside door handle, chrome 73-81 53-75-383Window crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383DASHTOPSDT-1300Dashtop, fits Firebird/Trans Am, 3/4 cover only 70-78 DT-1300Console Cover (not shown) 70-81 DT-1901Dashtop Cover 79-81 DT-1301WEATHERSTRIP 4pc kit of inner/outer, LH and RHBelt weatherstrip w/chrome outer bead & flat inner bead 70-81 52-70-102Belt weatherstrip w/small flat chrome inner bead and 70-81 52-70-103no outer beadREPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Hood latch 81-88 50-73-1331 Doorskin, lower 82-92 52-82-3140 Rocker panel 82-92 52-82-4050 Rear quarter panel 82-88 *38-82-5070 Floor pan half, full length, 65”L x 28”W 82-92 *52-82-70N.I. Trunk well 82-92 52-82-77GAS TANKSGas tank w/pump in tank w/filler neck 82-92 *52-82-110Gas tank w/pump in tank w/o filler neck 82-92 52-82-111Gas tank w/pump on engine w/filler neck 82-87 *52-82-112Gas tank w/pump on engine w/o filler neck 82-87 52-82-113Straps for gas tank 82-92 52-82-115OIL PANSDescription Oil Pan Gasket1980-85, V8, 305, 5 Liter 85-203 85-1041986-92, V8, 305, 5 Liter 85-202 85-1091987-92, V8, 350, 5.7 Liter 85-202 85-109DOOR & WINDOW CRANK HANDLESOutside door handle, chrome 82-92 93-82-387Outside door handle, black 82-92 93-82-386Window crank handle w/black knob, universal 82-92 53-58-380Window crank handle w/clear knob, universal 82-92 53-58-383DASHTOPSDashTop covers fit rightover existing dash, makesyour dash look new again.DT-1302DT-1904Dash Top, fits Firebird 82-92 DT-1302Console Cover, fits Firebird 82-82 DT-1904WEATHERSTRIPDoor Belt Weatherstrip, 4pc. kit for L and R (w/o chrome) 82-92 52-82-101Door weatherstip, 2pc kit for L and R door 82-92 52-82-106PONTIAC FIREBIRD 93-02REPLACEMENT PANELS40 Rocker panel 93-02 52-93-40WEATHERSTRIPDoor Belt Weatherstrip, 4pc. kit of inner/outer, L & R 93-02 52-93-101Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.76 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128applications that fit:PONTIACPONTIAC LEMANS, GTO, TEMPEST 64-67REPLACEMENT SHEETMETALIndex# Description Year Mill Part#07 4-Speed Tunnel Cover, w/o console 64-67 55-64-0707A 4-Speed Tunnel Cover with console 64-67 55-64-07A11 Battery tray, fits GTO only 64-67 66-64-1121 Front fender lower rear sec; 17”H 64-65 66-64-2121 Front fender lower rear sec; 17”H 66-67 66-66-2122 Front fender lower rear sec; 9”H, factory style 66-67 66-66-22with brace & rocker moulding clip holes31 Lower doorksin, 2DR; 14”H 64-65 66-64-3131 Lower doorskin, 2DR; 8”H 66-67 66-66-3139 Rocker panel, 2DR, factory style 64-67 55-64-3940 Rocker panel, 2DR 64-67 55-64-4043 Rocker panel, 2DR w/extension 64-67 55-64-43N.I. Inner rocker panel 64-67 55-64-4550 Stamped rear quarter 64-65 *66-64-5050 Stamped rear quarter 66 *66-66-50(add metal at bumper area for 67 models)57 Rear quarter rear sec; 16”H 64-65 66-64-5757 Rear quarter rear sec; 15”H x 45”L 66 66-66-5757 Rear quarter rear sec; 15”H x 45”L 67 66-67-5760 Taillight panel, fits GTO only 67 66-67-6064 Outer rear wheelhouse 64-67 66-64-6465 Rear window to trunk panel 64-65 66-64-6565 Rear window to trunk panel, 2DR Sedan/HT 66-67 64-66-6566 Trunk filler extension, lower inner rear quarter area 64-65 66-64-6666 Trunk filler extension, lower inner rear quarter area 66-67 66-66-6667 Inner rear wheelhouse 64-65 55-64-6770 Floor pan half, 70”L x 30”W 64-72 *55-64-7071 Front floor pan half, 31”L x 28”W 64-72 55-64-7172 Rear floor pan half, 31”L x 28”W 64-72 55-64-72N.I. Floor pan under rear seat, 30”L x 25”W 64-67 55-64-72A73 Trunk floor center, 45”L x 21”W 64-67 66-64-7374 Trunk floor side, 45”L x 23”W 64-67 66-64-7475 Trunk floor brace 64-67 55-64-7576 Floor to firewall extension, 17”L x 29”W 64-72 55-64-7677 Front floor brace, full 64-72 55-64-7778 Middle floor brace, full 64-72 55-64-78N.I. Rear floor brace, rocker to rocker 64-67 55-64-79N.I. Front floor brace, partial outer section, specify L or R 64-72 55-64-83N.I. Middle floor brace, partial outer section, specifyL or R 64-72 55-64-84N.I. Trunk floor complete 64-67 *64-66-91N.I. Battery retainer 66-67 53-65-9207 07A39406067 LH 67 RHGAS TANKDescription Year Mill Part#Gas tank, GTO, Lemans, Tempest 64 66-64-110Gas tank, Lemans & Tempest 65 66-65-110Gas tank, GTO, Lemans, Tempest 66-67 66-66-111Straps for gas tanks 64-67 55-64-115DOOR & WINDOW CRANK HANDLESWindow crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383DT-1303DASHTOPS DT-1304DashTop covers fit right over existingdash, makes your dash look new again.Dashtop, fits Pontiac GTO/Lemans/Tempest 66 DT-1303Dashtop, fits Pontiac GTO/ Lemans/Tempest 67 DT-130422All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com77

applications that fit:PONTIACMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128PONTIAC LEMANS, GTO, TEMPEST 68-720508 2665798372AREPLACEMENT SHEETMETALIndex# Description Year Mill Part#05 Radiator support, fits 68-70 GTO & 68-69 Lemans/Temp. 68-70 *66-68-05N.I. 4-Speed shift hump w/o console 68-69 55-68-0708 4-Speed shift hump w/console 68-69 55-68-0811 Battery tray 68-72 66-68-11N.I. Armrest, black plastic, paint to match, specify L or R 68-72 53-68-14N.I. Armrest base mouldings, stainless steel, specify L or R 68-72 53-68-1720 Front fender, fits GTO/Lemans 68-69 *66-68-2022 Front fender lower rear section 68-69 66-68-2222 Front fender lower rear, without louvers 70-72 66-70-2226 Front wheelhouse 68-69 66-68-2631 Lower doorskin, 8”H 68-69 66-68-3131 Lower doorskin, 8”H 70-72 66-70-3140 Rocker, 2DR 68-72 55-68-40N.I. Inner rocker panel 64-72 55-64-45N.I. Rocker, factory style, 2DR 68-72 55-68-3950 Rear quarter panel, fits 68 GTO & 68-69 Lemans/Tempest 68-69 *66-68-50modify for convertible50 Rear quarter panel, fits 69 GTO only, modify for conv. 69 *66-69-5050 Rear quarter panel, modify for convertible 70-72 *66-70-5057 Rear quarter lower rear sec, 17”Hx34”L 68 66-68-5757 Rear quarter lower rear sec, 17”Hx34”L 69 66-69-5764 Outer rear wheelhouse, except convertible 68-69 66-68-6464 Outer rear wheelhouse, exc. wagon. Modify top for conv. 70-72 66-70-6465 Rear window to trunk panel, 2DR Sedan/Hardtop 68-72 66-68-65N.I. Inner rear wheelhouse 68-72 55-68-6870 Floor pan half, 63”L x 31”W 68-72 *55-68-70N.I. Floor pan complete, 1 piece design w/3 braces attached 68-72 *55-68-70A71 Front floor pan half 68-72 55-64-7172 Rear floor pan half 68-72 55-64-7272A Floor pan under rear seat, rocker to rocker, 58”W x 21”L 68-72 55-68-72A73 Trunk floor center 68-72 55-68-7374 Trunk floor side 68-72 55-68-74N.I. Trunk floor brace 68-72 55-68-7576 Front floor pan extension 68-72 55-64-7677 Front floor brace 68-72 55-64-7778 Middle floor brace 68-72 55-64-7878A Rear floor brace, full 68-72 55-68-78A83 Front floor brace, partial outer section, L or R 64-72 55-64-8384Index# Description Year Mill Part#84 Middle floor brace, partial outer section, L or R 64-72 55-64-84N.I. Trunk filler panel, inside lower rear quarter 68 66-68-79N.I. Trunk filler panel, inside lower rear quarter 69 66-69-7979 Trunk filler panel, inside lower rear quarter 70-72 66-70-79N.I. Trunk floor, large one piece design 34”L x 56”W 68-72 *55-68-80N.I. Trunk floor, 1 pc; complete w/trunk & gas tank braces 68 *66-68-80N.I. Trunk floor, 1 pc; complete w/trunk & gas tank braces 69 *66-69-80N.I. Toolwell, Station Wagon only 68-72 55-68-81N.I. Rear cross bar 68 66-68-82N.I. Decklid, outer 70-72 *66-70-83N.I. Decklid, inner 70-72 *66-70-84N.I. Decklid, assembly, inner & outer 70-72 *66-70-85N.I. Battery retainer 68-72 53-65-92WINDOW CRANK HANDLESWindow crank handle w/black knob, universal 53-58-380Window crank handle w/clear knob, universal 53-58-383GAS TANKSGas tank, 2 vents 68-70 66-68-111Gas tank, 1 vent, w/o evaporation emission control 69-70 66-69-112Gas tank with evap. emission control 70 66-70-113Gas tank 71-72 66-71-114Straps for gas tanks 68-72 55-68-115DASHTOPSDashTop covers fit right overexisting dash, makes your dashlook new again.78ADT-1305Description Year Mill Part#Dashtop, fits Pontiac GTO/Lemans/Tempest, without air 69 DT-1306Dashtop, fits Pontiac GTO/Lemans/Tempest 70-72 DT-1305Dashtop, fits Pontiac GTO/Lemans/Tempest w/o side vents 70-72 DT-1307Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.78 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128SUBARU SEDAN/WAGON 85-89applications that fit:PORSCHE/SUBARU/suzukiSUZUKI SAMURAI 86-9540REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker panel, 2DR 86-95 368-86-40SUZUKI SIDEKICK/GEO TRACKER 89-98REPLACEMENT SHEETMETALIndex# Description Year Mill Part#42 Rocker, 4DR 85-89 362-85-4254 Rear wheel arch, 4DR 85-89 362-85-54GAS TANKSN.I. Gas tank, fits Sedan, Coupe & S.W. w/o fuel inj. 85-87 360-85-110N.I. Gas tank, fits Sedan, Coupe & S.W. with fuel inj. 85-94 360-85-111SUBARU LOYALE 90-9442REPLACEMENT SHEETMETALIndex# Description Year Mill Part#42 Rocker panel, 4DR 90-94 362-85-42N.I. Rear wheel arch, 4DR 90-94 362-85-542540REPLACEMENT SHEETMETALIndex# Description Year Mill Part#25 Front inner fender, specify L or R 89-98 369-89-25N.I. Doorskin lower, 9”H, 2DR, specify L or R 89-98 369-89-3140 Rocker panel, 2DR, specify L or R 89-98 369-89-40N.I. Rocker panel extension, 4DR, (attach to 369-89-40)LorR 89-98 369-89-41N.I. Floor pan front section, 27”L x 20”W, specify L or R 89-98 369-89-71N.I. Floor pan under front seat, 28”L x 28”W, specify L or R 89-98 369-89-72N.I. Step brace, 51”L 89-98 369-89-74N.I. Floor pan, rear, 28”L x 42”W 89-98 369-89-76N.I. Front seat brace, universal 89-98 369-89-77SUZUKI SWIFT/GEO METRO/SPRINT 89-94ALSO FITS: PONTIAC FIREFLYREPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Rocker panel, 2/3DR 89-94 369-89-41N.I. Rocker panel, 4DR 89-94 369-89-42N.I. Wheel arch, 3DR 89-94 369-89-51All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com79

applications that fit:TOYOTATOYOTA CAMRY 87-91Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128TOYOTA COROLLA 84-875451REPLACEMENT SHEETMETALIndex# Description Year Mill Part#54 Rear wheel arch, also fits 89-92 Cressida 87-91 385-87-54TOYOTA CAMRY 92-96REPLACEMENT SHEETMETALIndex# Description Year Mill Part#51 Rear wheel arch, fits FWD Sedan/Liftback 84-87 375-84-51TOYOTA COROLLA 88-924254REPLACEMENT SHEETMETALIndex# Description Year Mill Part#02 Upper cover reinforcement 92-94 385-92-0203 Front bumper cover, paint to match 92-94 *385-92-0304 Front bumper cover, paint to match, USA 95-96 *385-95-0405 Radiator support assembly 92-95 *385-92-0506 Front bumper re-bar 92-96 385-92-0607 Front bumper arm 92-96 385-92-0708 Front impact absorber 92-94 385-92-0808 Front impact absorber 95-96 385-95-0812 Grille, silver/gray/black 92-94 385-92-1213 Grille, black, paint to match 95-96 385-95-1320 Front fender 92-96 *385-92-2026 Front fender liner 92-96 385-92-2654 Rear wheel arch, fits Sedan/Wagon 92-96 385-92-5460 Rear bumper re-bar, exc. Wagon 92-96 385-92-6064 Rear bumper cover, exc. Wagon 92-96 *385-92-64LAMP ASSEMBLIES91 Headlamp assembly 92-94 385-92-9191 Headlamp assembly 95-96 385-95-9192 Parklamp assembly 92-94 385-92-9294 Signal lamp assembly 92-93 385-92-9495 Parklamp assembly, U.S.A. built with clear/yellow lens 95-96 385-95-9597 Side marker lamp, 92-93 USA built; 92-94 Japan built 92-93 385-92-97MIRRORSLH Mirror Assembly, flat head, black, ELECTRIC 92-96 385-92-351RH Mirror Assembly, convex, black, ELECTRIC 92-96 385-92-353LH Mirror Assembly, flat head, black, MANUAL 92-96 385-92-355RH Mirror Assembly, convex, black, MANUAL 92-96 385-92-357REPLACEMENT SHEETMETALIndex# Description Year Mill Part#42 Rocker panel, fits Sedan/Wagon 88-92 375-88-4254 Rear wheel arch, fits Sedan 88-92 375-88-54N.I. Rear wheel arch, fits Liftback 88-92 375-88-51TOYOTA COROLLA 93-9753REPLACEMENT SHEETMETALIndex# Description Year Mill Part#N.I. Rear wheel arch, fits Hatchback 93-97 375-93-51N.I. Rear wheel arch, fits 5DR Liftback 93-97 375-93-5253 Rear wheel arch, fits Sedan 93-97 375-93-53N.I. Rear wheel arch, fits Wagon 93-97 375-93-54Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.80 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128applications that fit:VOLKSWAGENVOLKSWAGEN BEETLE & SUPER BEETLE 52-79REPLACEMENT PANELS400-52-00 400-68-01400-71-02400-52-03400-52-10400-68-11 400-71-12REPLACEMENT SHEETMETALIndex# Description Year Mill Part#00 Front panel 55-67 400-52-0001 Front panel 68-78 400-68-0102 Front panel, fits Super Beetle, w/o louvers 71-79 400-71-0203 Front panel assembly 52-67 400-52-03N.I. Front panel assembly 68-73 400-68-0410 Front wheelhouse section with bumper bracket retainer 52-67 400-52-1011 Front wheelhouse section with bumper 68-73 400-68-11bracket retainer (w/o 5 MPH bumper)12 Front wheelhouse section with bumper 71-73 400-71-12bracket retainer, fits Super Beetle (w/o 5 MPH bumper)13 Front shock tower sec, fits Super Beetle 71-79 400-71-1314 Front wheelhouse lower rear section 52-79 400-52-1415 Front wheelhouse lower rear section, fits Super Beetle 71-79 400-71-1518 Firewall assembly, lower section 52-78 400-52-1830 Outer doorskin, 5”H 62-79 400-52-3047 Front hinge pillar,lower sec, 5”H 52-79 400-52-4749 Rear quarter front half, 27”Hx30”L 52-67 400-52-4949 Rear quarter front half, 27”Hx30”L 68-79 400-68-4950 Rear quarter sec, 10”H 52-79 400-52-5051 Rear quarter sec, 4”H 52-79 400-52-5152 Rear fender fastening panel 52-79 400-52-5253 Rear wheelhouse top half 52-79 400-52-5354 Rear wheelhouse lower front section 52-66 400-52-5455 Rear wheelhouse lower front section 67-78 400-68-55with torsion bar suspension56 Rear wheelhouse rear section with bumper 58-73 400-58-56bracket retainer (w/o 5 MPH bumper)57 Spare tire well (Except Super Beetle) 58-79 400-58-5780 Rear apron (does not fit 1967) 52-66 400-52-8080 Rear apron 68-74 400-68-80400-71-13 400-52-14400-52-50 400-52-51400-52-53400-52-18400-52-47400-71-15400-52-52400-52-49400-68-49400-52-54 400-68-55400-58-56400-58-57400-52-80 400-68-80All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com81

applications that fit:VOLKSWAGENMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128VOLKSWAGEN BEETLE & SUPER BEETLE 52-79FENDERS AND BUMPERSREPLACEMENT SHEETMETALIndex# Description Year Mill Part#20 Front fender, fits Beetle, specify L or R 52-66 400-52-2021 Front fender, fits Beetle, specify L or R 67 400-67-2122 Front fender, fits Beetle, specify L or R 68-73 400-68-2223 Front fender, fits Beetle, specify L or R 74-77 400-74-2324 Front fender, fits Super Beetle, specify L or R 71-73 400-71-2425 Front fender, fits Super Beetle, specify L or R 74-79 400-74-2590 Rear fender, specify L or R 52-67 400-52-9091 Rear fender, specify L or R 68-72 400-68-9192 Rear fender, specify L or R 73 400-73-9293 Rear fender, specify L or R 74 400-74-9394 Rear fender, specify L or R 75-79 400-75-9496. Fender welt, front & rear, fits Standard & Super 52-79 400-52-9660 Front bumper, with over-riders 52-67 400-52-6060 Front bumper 68-73 400-68-6061 Rear bumper 68-73 400-68-6161 Rear bumper,chrome 74-79 400-74-6164 Front bumper, fits Super Beetle 74-79 400-74-6465 Bumper bracket, front, specify L or R 68-73 400-68-6566 Bumper bracket, rear, specify L or R 68-73 400-68-66REAR FENDERS9293941952-67909119741975-791973961968-72Front BumpersRear BumpersFRONT FENDERS20212219671968-73400-52-601952-67400-68-6068-73400-74-641974-79400-68-611968-73400-74-611974-791952-6623242565661974-771971-731973-79DASH TOPSDashTop covers fitright over existingdash, makes yourdash look new again.DT-1204DT-1201Description Year Mill Part #Fits Standard Beetle 68-74 DT-1204Fits Super Beetle 72-79 DT-1201Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.82 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128VOLKSWAGEN BEETLE & SUPER BEETLE 52-79FLOOR AND CHASSIS BODY PANELS400-52-41applications that fit:VOLKSWAGEN400-52-42400-52-43400-69-44400-71-45REPLACEMENT SHEETMETALIndex# Description Year Mill Part#17 Axle beam repair kit 68-79 400-68-1735 Frame head assembly 52-65 400-52-3537 Frame head bottom panel 52-65 400-52-3738 Frame head bottom panel 66-78 400-66-3839 Frame head bottom panel, fits Super Beetle 71-79 400-71-3940 Running Board with mat and moulding 8/66-79 400-52-4041 Rocker, inside & outside under door 52-79 400-52-4142 Running board retainer with nuts welded on back side 52-79 400-52-4243 Heating channel w/bottom plate 52-68 400-52-4344 Heating channel w/bottom plate 69-78 400-69-4445 Heating channel w/bottom plate, fits S/B only 71-79 400-71-4546 Rocker, lower repair sec 52-79 400-52-4658 Frame support under luggage shelf, L or R 52-73 400-52-5859 Shelf, luggage area behind seat 52-73 *400-52-5972 Jack support w/floor pan sec 52-79 400-52-7273 Battery tray 52-79 400-52-7376 Heating channel bottom plate 52-79 400-52-7677 Heating channel bottom plate, fits S/B only 71-79 400-71-7778 Floor pan half, also fits convertible 52-72 400-52-78includes side seat rails and jack support79 Floor pan half, with side seat rails only 73-79 400-71-79(Does not include front center seat mount hump)79A Floor pan half, with side rails and front center seatmount hump73-79 *400-71-79A400-52-58400-52-72400-52-46400-52-76400-71-77400-52-59400-52-73400-68-17400-66-38400-52-78400-71-79400-52-40 L or R 400-71-79AAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com83

applications that fit:VOLKSWAGENVOLKSWAGEN BEETLE & SUPER BEETLE 52-79ELECTRICAL, ENGINE & TRANSMISSIONFUEL & TRANSMISSION PARTSIndex# Description Year Mill Part#G Fuel Tank, fits Standard Beetle 68-79 400-68-98G Fuel Tank, fits Super Beetle 74-79 400-74-99S Rear Transmission Mount 50-72 113 301 263T LH Rear Transmissin Mount 73-77 73-79 113 301 263CT RH Rear Transmissin Mount 73-77 73-79 113 301 264Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128VOLKSWAGEN BUS 68-79725556GVOLKSWAGEN BUS 50-67ST52846930318364424188,89872185,86REPLACEMENT SHEETMETALIndex# Description Year Mill Part#02 Front panel lower, 5”H 68-7/72 402-68-0220 Front door step panel 68-72 402-68-2021 Front Fender 68-7/72 402-68-2130 Cargo doorskin 8”H 68-79 402-68-3031 Cargo inner door bottom 68-79 402-68-3141 Inner rocker 8/72-79 402-72-4142 Lower rail for sliding door 68-79 402-68-4252 Rear wheel arch, has flair 71-79 402-71-5255 Corner panel 9”H 68-71 402-68-5556 Corner panel 15”H 72-79 402-72-5664 Outrigger, front 68-79 402-68-6469 Outrigger, rear 68-79 402-68-6972 Battery tray 73-79 402-73-7283 Front jack point support 68-79 402-68-8384 Rear jack point support 68-79 402-68-8485 Front crossmember 68-72 402-68-8586 Front crossmember 73-79 402-73-8687 Center crossmember 68-79 402-68-8788 Rear crossmember 68-72 402-68-8889 Rear crossmember 73-79 402-73-89VOLKSWAGEN BUS 80-906984642002837772777873785120REPLACEMENT SHEETMETALIndex# Description Year Mill Part#20 Front fender 50-67 401-50-2051 Rear wheel arch with lower front section, no flair 50-67 401-50-5152 Lower front sec of rear wheel arch, RH only 50-67 401-50-5272 Front crossmember 50-67 401-50-7273 Rear crossmember 50-67 401-50-7377 Front outrigger 50-67 401-50-7778 Rear outrigger 50-67 401-50-78Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.84 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com5256523054 31 21 32 5120REPLACEMENT SHEETMETALIndex# Description Year Mill Part#20 Front door step panel 80-90 402-80-2021 Front fender arch 80-90 402-80-2130 Cargo doorskin 8”H 80-90 402-80-3031 Cargo inner door bottom 80-90 402-80-3132 Front door outer lower doorskin 80-90 402-80-3251 Left side lower panel 80-90 402-80-5152 Rear wheel arch 80-90 402-80-5254 Rear quarter lower front section 80-90 402-80-5456 Rear quarter lower rear section 80-90 402-80-56All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128VOLKSWAGEN GOLF/JETTA 85-92applications that fit:VOLKSWAGENVOLKSWAGEN GOLF/GTI/JETTA 99-05The Golf/GTI 7th & 8th position of the VIN are (1J) for generation 4 style.The Jetta 7th & 8th position of the VIN are (9M) for generation 4 style.40424051 54425951 54REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker panel, 2DR with extension 85-92 409-85-4042 Rocker panel, 4DR 85-92 409-85-4251 Rear wheel arch, 2DR 85-92 409-85-5154 Rear wheel arch, 4DR 85-92 409-85-5459 Fuel filler hole plate 85-92 409-85-59VOLKSWAGEN GOLF/JETTA 93-994359REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker panel, 2DR, Golf/GTI 99-05 409-99-4042 Rocker panel, 4DR, Golf/Jetta 99-05 409-99-4251 Rear wheel arch, 2DR, Golf/GTI 99-05 409-99-5154 Rear wheel arch, 4DR, Golf (does not fit Jetta) 99-05 409-99-5459 Fuel filler hole plate, round hole 99-05 409-99-5942515459REPLACEMENT SHEETMETALIndex# Description Year Mill Part#42 Rocker panel, 4DR, fits Golf/Jetta (old style) 93-99 409-93-4243 Rocker panel, 2DR with extension, fits Golf/GTI (old style) 93-99 409-93-4351 Rear wheel arch, 2DR, fits Golf/GTI (old style) 93-99 409-93-5154 Rear wheel arch, 4DR, fits Golf/Jetta (old style) 93-99 409-93-5459 Fuel filler hole plate, square hole 93-99 409-93-59All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com85

applications that fit:VOLKSWAGENVW KARMANN GHIA 56-74Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128VOLKSWAGEN RABBIT 75-844151 54REPLACEMENT SHEETMETALIndex# Description Year Mill Part#00 Valance panel, 10”Hx36”L 56-74 404-58-0021 Fender headlight sec 60-74 404-58-2122 Front fender lower rear sec, 13”H 60-74 404-58-2235 Frame head assembly 56-65 400-52-3537 Frame head bottom panel 56-65 400-52-3738 Frame head bottom panel 66-78 400-66-3842 Rocker panel (factory type) 56-74 404-58-4250 Rear quarter lower front sec, 12”H 56-74 404-58-5051 Rear wheel arch upper 56-74 404-58-5152 Rear qtr lower rear sec, 10”H, indented at bumper 72-74 404-72-5253 Rear quarter lower rear sec, 10”H 56-71 404-58-5354 Rear quarter inner lower front section 56-74 404-58-5460 Rear panel 56-74 404-58-6069 Floor pan half 56-74 *404-56-6971 Rear floor pan 36”L x 25”W 56-74 404-58-7172 Front floor pan 30”L x 23”W 56-74 404-58-725971REPLACEMENT SHEETMETALIndex# Description Year Mill Part#41 Rocker panel, 2DR 75-84 407-75-4151 Rear wheel arch, 2DR 75-84 407-75-5154 Rear wheel arch, 4DR, 75-84 407-75-5459 Fuel filler hole plate 75-84 407-75-5971 Front floor pan section, specify L or R 75-84 407-75-71DT-1206DT-1207DashTop covers fit right over existing dash, makes your dashlook new again.DASH TOPSDescription Year Mill Part #Dash top 66-70 DT-1206Dash top 71-74 DT-1207Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.86 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128VOLVO 142, 144, 145, 164 69-74VOLVO 242, 244, 245, 262, 264, 265 75-85B4-2B4-3B4-4B4-5applications that fit:VOLVOBUTTONHEAD & COUNTERSUNK RIVETSB4-6B4-8BUTTONHEADB6-2B6-4B6-6B6-8B6-10B6-12C4-2C4-3C4-4REPLACEMENT SHEETMETALIndex# Description Year Mill Part#40 Rocker panel, 2DR complete 69-85 422-69-4041 Rocker panel outer, 4DR 69-85 422-69-41N.I. Floor pan, front 75-85 422-75-71N.I. Floor pan, rear 75-85 422-75-74N.I. Spare tire well 75-85 422-75-72DASH TOPSDashTop covers fitright over existingdash, makes yourdash look new again.DT-1401DT-1402DT-1403Descriptionn Year Mill Part #Dashtop, fits Volvo, 140, 160 Series 73-74 DT-1401Dashtop, fits Volvo, 240, 260 Series 75-80 DT-1402Dashtop, fits Volvo, 240, 260 GL and DL 81-93 DT-1403QualityHand RiveterM-39000 - Quality cast riveter will give you years of service. Known andtrusted for durability, quality and performance. Patented design sets upto 3/16” all steel rivets. Includes four nosepieces mounted on riveter plusservice tool.Deluxe Rivet KitM-39001 - A deluxe riveter kit thatincludes the M-39000 riveter. Alsofeatures an assortment of popularautomotive rivets. Molded plasticcase houses riveter, rivets andservice tool. Special compartmentholds optional countersink drill bit.MATCH YOUR RIVET WITH THIS ACTUAL SIZE RIVET CHARTPlace rivet on picture lining up rivet head with chart. The Mandrel (nailportion) length does not determine rivet size. If rivet length is between twosizes (i.e. B4-2 and B4-3) choose the larger size.RIVET CHARTC = Countersunk B = ButtonheadRivet Rivet Size Grip Part Number HeadDiameter Head Sty Range Plated Steel Rivet Dia.Steel MandrelB4-2 Up to 1/8” M40112 1/4”C4-2 Up to 1/8” M40113 .240B4-3 1/8”to 3/16” M40115 1/4”1/8” C4-3 1/8” to 3/16” M40116 .240B4-4 3/16” to 1/4” M40117 1/4”C4-4 3/16” to 1/4” M40118 .240B4-5 1/4” to 5/16” M40120 1/4”B4-6 5/16” to 3/8” M40121 1/4”B4-8 3/8” to 1/2” M40122 1/4”B6-2 Up to 1/8” M40145 3/8”B6-4 1/8” to 1/4” M40147 3/8”B6-6 1/4” to 3/8” 613638 3/8”3/16” B6-8 3/8” to 1/2” M40152 3/8”B6-10 1/2” to 5/8” M40155 3/8”B6-12 5/8” to 3/4” M40159 3/8”All 1/8” & 3/16” Rivets are Packaged 500/boxCountersunk Drill BitM-39100 - Countersunk Double EndedDrill Bit provides the correct size holefor 1/8 countersunk rivets. Countersunkrivets shown above are used to hide thehead of the rivet into the metal allowingless bondo to be used.SizeDouble End High Speed Drill BitQUALITY HIGH SPEED DRILL BITSMADE IN USAPart No.1/8 90-0083/16 90-01298808 - 1/8” double ended drill bit (12 pack)90-316 - 3/16” double ended drill bit.All manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.Specify LH (Drivers Side) or RH (Passenger Side) When Ordering.Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.com87

UNIVERSAL REPAIR PANELSDoor Bottoms with Bottom LipJ-11560 - 59”L x 11.5”H,Universal door bottom with5/8” lip to wrap bottomedge.J-5560 - 59”L x 5.5”H,Universal door bottom with3/8” lip to wrap bottomedge.Call forPricingMill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128Cold Rolled Flat Sheet SteelDoor Bottom with Inside Bottom2”1”9”Part no....................................Gauge..................SizeCRS-2424-G......... 24ga.........24”x48”CRS-2422-G......... 22ga.........24”x48”CRS-2420-G......... 20ga.........24”x48”CRS-2418-G......... 18ga.........24”x48”CRS-2416-G......... 16ga.........24”x48”DB-49” x 59”L (with 2” bottom and 1” lip)Floor Support 2” Hat ChannelDB-32”5/8”9” x 59L (with 2” bottom and 5/8” lip)9”3/4” A(END VIEW)FSC-36 - “A” Dim: 2” x 36”L, 18 gaugeSR6X-48 - “A” Dim: 2-1/16” x 48”L, 16 gauge4-1/16” overall widthFlex Edge with Tabs on One Side1/8” Angle IronFor inside or outsidecurves. Saves time andlabor when rebuildinga new lip for wheelarch areas and norepair section is available.Call forPricingJ-3436 - 3/4” x 3/4” x 36”Flex EdgeJ-4536 - 3/4” x 3” x 36”Flex EdgeCS-1811-48 - 1” x 1” x 48”CS-1822-48 - 2” x 2” x 53”On all universal sheet metal there is aminimum order 3 pieces of any one length88 Bold Type - New Item • * - Too Large for UPS • N.I. - Not Illustrated800-888-5072 • Toll Free Fax 888-781-2700visit our web site: www.rustrepair.comAll manufacturers’ names, numbers, and descriptions are used for referencepurposes only. It is not implied that any part listed is the product of the originalmanufacturers or approved by any of these manufacturers.

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128Prices are subject to change without notice.MOLDED SPONGE RUBBER WEATHERSTRIPAV-4746 - 50ft $51.97AV-16393 - 15ft $14.66Door flange weatherstripChrysler 1958-onAV-4745 - 50ft $47.25AV-16392 - 15ft $17.12Door flange weatherstrip55-on FordAV-4744 - 50ft $49.71AV-16391 - 15ft $17.02Door flange weatherstrip55-on GMAV-4747 - 50ft$36.29Door inner beltweatherstripAll cars 1955-’70AV-16524 - 50ft$49.20Door seal weatherstripGM 1964-’7250-73-90 - 13ft. 6in $19.57Door weatherstrip Chevrolet, Ford& Dodge trucks 1973-’87. Mountedon post and header. Enough forone door.AV-4749 - 50ft $71.34AV-16394 - 15ft $25.32Deck lid weatherstrip: GM Cars1956-on.AV-4675 - 50ft $48.14AV-16390 - 15ft $16.05Door flange weatherstripGM, Ford, Chrysler, car & truckAV-4707 - 50ft $40.08Door Flange weatherstripChrysler 1950-54Ford 1950-58AV-16525 - 50ft$53.30Door seal weatherstripGM 1955-63AV-16523 - 50ft$57.40Door seal weatherstripGM 1972-onAV-16892 - 25ft $44.49Roof rail weatherstripGM 1968-’77AV-16522 - 25ft$47.15Top of door sealGM late 1970’sAV-4742 - 50ft $52.17Trunk and rear deck lid weatherstrip:GM 1959-on;Studabaker 1955-’67;Ford, Lincoln, Mercury 1949-on.AV-4743 - 35ft $58.84Univ. trunk weatherstripAV-4703 - 50ft $60.37AV-16395 - 15ft $25.63Trunk and rear deck gutterweatherstrip - GMAV-4750 - 50ft $61.40Deck lid weatherstrip: Ford Cars1956-on.AV-4712 - 50ft $76.26Trunk and rear deck lidweatherstrip GM Cars 1949-’54.PEEL BAK ADHESIVE SPONGEWEATHERSTRIPAuveco sponge rubber weatherstrip,with its variety of sizes, is used in manyold and new settings for the automotive,commercial and residential industry.Peel-back linen tape design eliminatesthe use of adhesives. Special lightweightclosed cell sponge material willpress on any clean dry surface.50 ft. RollThickness Width Part No Price5/32” 3/8” AV-4850 $13.335/32” 1/2” AV-4851 $19.855/32” 3/4” AV-4852 $22.805/32” 1” AV-4853 $30.725/16” 3/8” AV-4854 $15.945/16” 1/2” AV-4855 $21.965/16” 3/4” AV-4856 $31.675/16” 1” AV-4857 $40.127/16” 3/8” AV-4858 $23.237/16” 1/2” AV-4859 $27.037/16 3/4” AV-4860 $39.177/16” 1” 97-861 $51.25WEATHERSTRIP ADHESIVEHigh strength weatherstrip adhesive.Bonds rubber and vinyl weatherstrip ondoors, trunks and windows.3M-8001 - Super weatherstripadhesive, yellow $7.25/5 oz.8B - Super weatherstrip adhesive, black$4.86/ 5 oz89

Mill Supply Inc., 19801 Miles Rd., Cleveland, OH 44128Prices are subject to change without notice.AUTOMOTIVE BODY SEALERSExterior or Interior Body SealerFor use as a water and dust seal on exterior and interior body surfaces.Use every place a car or truck needs sealing such as drip rails, interior truckwelds, exterior body seam welds and many other areas around interior andexterior of the body. Applies to bare or bonderized metal, or other paintedsurfaces. Spreads with spatula, putty knife or wipe joint with finger. Can beair dried or baked and painted within 30 minutes after application. Completedrying or curing will take place overnight or sealer can be force dried.Will not harden or become brittle. Excess smears can be cleaned up withsuitable solvent before sealer dries. Sealer surfaces must be painted.AV-1001 - Seam Sealer (natural color)$8.72 each $7.85 12+ tubesFREE Automotive Hardware& Fastener Catalog• Huge variety of over1500 AutomotiveHardware Items• Over 60 Pre-PackagedKits• Buy by the Box orby the Kit• Discounts whenPurchased in Quantities.Silaprene Adhesive SealantBonds all types of metal, plastics, masonry and concrete. For bonding andsealing in the repair and manufacture/construction of all vehicles, and mostbuilding product components. Use as adhesive or sealant. Withstands broadtemperature range: -60oF to 250oF. Exceptional weatherability, resist sunlight,rain, ice, snow, heat and cold. Resistant to chemicals, oils, greases, fuel andsalt. Provides flexibility that resists shocks, vibration and stress. Paintable.87-000 - Silaprene Adhesive Sealant (gray) $10.73each $9.47 2+ tubesSikaflex Adhesive SealantSikaflex is a one-compound, moisture curing polyurethane designed for use asan all purpose sealant. It cures to a permanently elastic seal, is paintable andsandable, and bonds to aluminum, steel, fiberglass, glass and wood with propersurface preparation. Use in automotive, industrial and commercial applications.This sealant is a standard in the glass setting industry and is used for windshieldreplacement and leaks.M-1378 - Sikaflex-221 Adhesive/Sealant (black) $11.23 each $10.11 12+ tubesOrder this catalog if you are interested in alarge selection of Body Moulding Clips, PanelRetainers, Bolts, Nuts, Screws, Rivets, Shims,Electrical Terminals and Connectors, Fuses, Bulbs,Weatherstrip and Specialty Body Tools.FREE Restoration Parts Catalogfor Pick-up Trucks, Sport UtilityVehicles, Full Size & Mini VansWorking on a pickup, SUV orVan? Our ‘Truck’ catalog listsparts for Chevrolet, Dodge,Ford, International, Jeep,Mercury, Mitsubishi, Nissan,Oldsmobile, Plymouth, Pontiac,Sprinter, Suzuki, Toyota andVolkswagen.KA - 376 - TRIM PAD REMOVAL TOOLreaches under the trim panel to support,grip and remove plastic trim pad fastenerswithout damaging or scratching thesurface. A must for GM cars... works onmetal fasteners as well. Reverse end oftool used to remove door panels. $5.74Floor PansRear QuartersCabCornersRocker PanelsKA-369 Universal Moulding ReleaseTool. Remove moulding without ruining theclip or the moulding. Rock tool to spring clipand release moulding. $4.62and much more....95

year................................................pageBMW84-91 318I, 325E, M3.............192-99 3 Series ..........................1BUICK68-74 Apollo........................... 3775-79 Apollo........................... 3882-96 Century..........................197-05 Century..........................280-90 Elecrtra RWD................180-90 LeSabre RWD...............186-99 LeSabre FWD...............185-96 Park Avenue/Ultra.......178-80 Regal...............................181-04 Regal...............................282-89 Skyhawk....................... 2467-72 Skylark............................392-98 Skylark............................2CADILLAC82-88 Cimarron...................... 2471-76 Eldorado.........................4CHEVROLET35-39 Full Size..........................440-48 Full Size..........................549-54 Full Size..........................655-57 Full Size.......................7-1158-60 Full Size........................ 1261-64 Full Size......................13-1465-66 Full Size........................ 1567-70 Full Size........................ 1671-90 Full Size........................ 1787-96 Beretta.......................... 1767-68 Camaro......................18-1969 Camaro......................20-2170-81 Camaro......................22-2382-92 Camaro........................ 2393-02 Camaro........................ 2477-90 Caprice......................... 1782-05 Cavalier........................ 2482-90 Celebrity...................... 2464-67 Chevelle.....................26-2768-69 Chevelle.....................28-2970-77 Chevelle.....................30-3162-68 Chevy II......................36-3787-96 Corsica......................... 3159-87 El Camino..................32-3389-94 Geo Metro.................. 7989-94 Geo Tracker................ 7977-90 Impala .......................... 1764-67 Malibu........................26-2768-69 Malibu........................28-2970-83 Malibu........................30-3197-03 Malibu.......................... 3170-88 Monte Carlo.............34-3568-74 Nova...........................36-3775-79 Nova............................. 3889-94 Sprint............................ 7971-77 Vega............................. 38INDEXyear ................................................page year ................................................page year ................................................pageCHRYSLER88-97 New Yorker & LHS.... 44DATSUN/NISSAN70-78 240Z/260Z/280Z...... 3879-83 280ZX.......................... 38DODGE81-89 Aries.............................. 3870-74 Challenger ................39-4066-70 Charger........................ 4171-74 Charger........................ 4265-67 Coronet........................ 4268-70 Coronet........................ 4363-77 Dart/Swinger.............. 4488-93 Dynasty........................ 4493-97 Intrepid......................... 4495-99 Neon ............................ 4463-64 Polara........................... 4287-94 Shadow........................ 4468-70 Superbee..................... 43FORD35-36 Full Size........................ 4537-40 Full Size........................ 4641-51 Full Size........................ 4752-56 Full Size........................ 4857-58 Full Size........................ 4959-72 Full Size........................ 5095-00 Contour........................ 5992-97 Crown Victoria........... 5991-02 Escort............................ 5967-71 Fairlane......................... 5160-65 Falcon........................... 5100-04 Focus............................ 5160-68 Galaxie......................... 5070-77 Maverick...................... 5164-66 Mustang.....................52-5367-68 Mustang.....................54-5569-70 Mustang....................... 5671-73 Mustang....................... 5774-93 Mustang....................... 5867-71 Ranchero..................... 5186-07 Taurus........................... 5884-91 Tempo.......................... 5958-97 Thunderbird................ 5968-71 Torino........................... 5172-76 Torino........................... 59HONDA86-97 Accord ......................... 6088-00 Civic.............................. 6185-91 CRX............................... 61LINCOLN49-51 Full Size Lincoln......... 63MAZDA93-02 626................................ 6289-05 Miata............................ 6299-03 Protege......................... 62MERCEDES73-89 Chassis Type 107....... 6268-76 Chas. Type 114/115. 6273-80 Chassis Type 116....... 6286-95 Chassis Type 124....... 6381-91 Chassis Type 126....... 6394-00 Chassis Type 202....... 6396-02 Chassis Type 210....... 63MERCURY49-66 Full Size Mercury....... 6379-86 Capri............................. 6371-77 Comet.......................... 6367-73 Cougar......................... 6489-97 Cougar......................... 6592-97 Grand Marquis........... 6595-00 Mystique...................... 5996-05 Sable............................. 5884-91 Topaz ........................... 5991-02 Tracer........................... 59OLDSMOBILE92-98 Achieva........................ 6592-99 88/LSS/Regency........ 6580-90 88/98 Cruiser RWD.... 6591-96 98 Regency FWD....... 6564-67 Cutlass.......................... 6568-72 Cutlass.......................... 6673-77 Cutlass.......................... 6782-96 Cutlass Ciera............... 6778-88 Cutlass Supreme......... 6788-97 Cutlass Supreme FWD.6782-88 Firenza.......................... 2468-74 Omega......................... 3775-79 Omega......................... 38PLYMOUTH49-52 Full Size Car...............7267-74 Barracuda................68-6964 Belvedere....................7266-70 Belvedere.................70-7170-76 Duster..........................7292-94 Duster..........................7163-64 Fury..............................7266-70 GTX...........................70-7181-89 Reliant.........................7266-74 Roadrunner.............70-71See page 25 for our Order form65 Satellite........................7266-74 Satellite ...................70-7167-76 Scamp.........................7287-94 Sundance....................7167-76 Valiant.........................72PONTIAC82-94 J2000............................ 2482-91 6000............................. 2471-77 Astre............................. 3882-86 Bonneville RWD........ 7387-99 Bonneville FWD......... 7367-69 Firebird.......................74-7570-02 Firebird......................... 7678-81 Grand Am.................... 7392-98 Grand Am.................... 7378-87 Grand Prix................... 7388-03 Grand Prix FWD........ 7364-67 GTO.............................. 7768-72 GTO.............................. 7864-67 Lemans......................... 7768-72 Lemans......................... 7878-81 Lemans......................... 7383-89 Parisienne.................... 1783-89 Safari............................. 1795-05 Sunfire.......................... 2482-94 Sunbird......................... 2464-67 Tempest....................... 7768-72 Tempest....................... 7887-96 Tempest....................... 3170-92 Trans Am..................... 7668-74 Ventura........................ 3775-79 Ventura........................ 38SUBARU90-94 Loyale........................... 7985-89 Sedan/Wagon............ 79SUZUKI86-95 Samurai........................ 7989-98 Sidekick........................ 7989-94 Swift.............................. 79TOYOTA87-96 Camry........................... 8084-97 Corolla ......................... 80VOLKSWAGEN52-79 Beetle ........................81-8450-90 Bus................................ 8485-05 Golf/GTI/Jetta............. 8556-74 Karmann Ghia............ 8675-84 Rabbit........................... 86VOLVO67-85 140 & 240 Series....... 87