Michelin Truck Tire Data Book - Wanderlodge Owners Group

SPECIFICATIONS FOR 295/60R22.5XZA2 ®ENERGY AND XDA2 ® + ENERGY LRJ AT 75 MPHON 9.00 X 22.5" OR 8.25 X 22.5" WHEELS/RIMSLOAD AND INFLATION TABLE FOR 295/60R22.5 LRJ9.00 x 22.5" WHEEL/RIM AT 65 MPH (1) (Design Specs)MAXIMUM LOADAND PRESSUREPER AXLEMAXIMUM LOADAND PRESSUREPER TIREPSI 85 90 95 100 105 110 115 120 125 130 130kPa 590 620 660 690 720 760 790 830 860 900 900LBSKGSINGLESINGLE10520478011010498011500522011980542012460560012930586013400604013860628014320646014780670073903350DUALDUAL19300876020200912021100960021980996022860102802372010760245801108025440115202628011880271201230067803075(2)The maximum speed on a 9.00" wheel/rim may be increased to 75 mph by using the adjustedload and pressure table below.LOAD AND INFLATION TABLE FOR 295/60R22.5 LRJ9.00 x 22.5" WHEEL/RIM AT 75 MPH (1)MAXIMUM LOADAND PRESSUREPER AXLEMAXIMUM LOADAND PRESSUREPER TIREPSI 85 90 95 100 105 110 115 120 125 130 130kPa 590 620 660 690 720 760 790 830 860 900 900LBSKGSINGLESINGLE10180464010660482011130508011590526012050544012510568012960586013420610013860626014300650071503250DUALDUAL18800856019680892020540936021400972022260100402310010480239401080024760112402558011560264001200066003000(3)The 295/60R22.5 LRJ may also be mounted on a 8.25 inch wheel/rim. Note that most 8.25 x 22.5"wheel/rims are rated at 120 psi cold and the nominal load must not exceed the rating for this coldpressure. Use of an 8.25" wheel/rim with cold pressure rating of 120 psi, requires a further reductionof load.LOAD AND INFLATION TABLE FOR 295/60R22.5 LRJ8.25 x 22.5" WHEEL/RIM UP TO 75 MPH (1)MAXIMUM LOADAND PRESSUREPER AXLEMAXIMUM LOADAND PRESSUREPER TIREPSI 75 80 85 90 95 100 105 110 115 120 120kPa 520 550 590 620 660 690 720 760 790 830 830LBSKGSINGLESINGLE90304100935042409850446010250466010710486011040500011420518011680530012170552012350560061752800DUALDUAL1698077201764080001792081201866084801976089602010091202078094402142097202214010040227001030056752575(4)(1) Exceeding the legal speed limit is neither recommended nor endorsed.(2) Matches maximum load and pressure indicated on the tire sidewall.(3) Lower than maximum load indicated on the tire sidewall.(4) Lower than maximum load and pressure indicated on the tire sidewall.Load and inflation industry standards are in a constant state of change. Michelin continually updates its productinformation to reflect these changes. Therefore, printed material may not reflect the current load and inflation information.AppendixNOTE: The actual load and inflation pressure used must not exceed the wheel/rim manufacturer's maximumconditions. Never exceed a wheel/rim manufacturer's limits without permission of the component manufacturer.Single configuration = 2 tires per axle. Dual configuration = 4 tires per axle.88