Michelin Truck Tire Data Book - Wanderlodge Owners Group

PROPER FASTENER FOR X ONE ®TIREON STUD PILOTED WHEELSIt is important that the proper fasteners be used whenmounting the X One ®tire on stud piloted wheels. If afastener specified for the stud piloted aluminum wheelis used on a steel wheel, it will bottom out on the brakedrum and the proper clamping force necessary to helpensure that the torque on the wheel remains constantwill not be achieved, possibly resulting in a “wheel off”situation.In the table below, the top fastener, Part No. 5554R&Lis primarily for the Alcoa single mounted stud pilotedaluminum wheel (ex. 8.25 x 22.5") and 14.00 x 22.5" widebase stud piloted steel wheel. Part Number 5995R&L isfor the Alcoa 14.00 x 22.5" wide base stud pilotedaluminum wheels.The last two fasteners Part No.5652R&L for a 3 ⁄4"-16studs and 5977R&L for a 1 1 ⁄8"-16 studs are specified forthe 14.00 x 22.5" stud piloted steel wheel.Part No. Replaces Thread Hex High Application and General InformationFor Single Mounting5554R&LAlcoa 5554R&LBudd 706 13/43⁄4" - 16 1 1 ⁄2" 1"of Alcoa ForgedAluminum Disc Wheelsand Steel Stud Piloted WideSingle Wheels.For Alcoa Wide Base Aluminum5995R&LAlcoa 5995R&LWebb 178950R178951L3⁄4" - 16 1 1 ⁄2" 1 3 ⁄8"Wheels – “Long Grip” Cap NutLarger height provides greater lugwrench contact into wheel.5652R&L ZincDichromatePlatingAccuride NTL/NTR 25Budd 37888/9Gunite 2564/65Motor Wheel 84523/243⁄4" - 16 1 1 ⁄2" 7⁄8"Steel Wheel:Single Stud MountingFront and Rear5977R&LHardened ZincYellowDichromatePlatingAlcoa 5977 R&LAccuride NTL/NTR 25Alcoa 5552R&LBudd 37891/21 1 ⁄8" - 16 1 1 ⁄2" 7⁄8"Single Large Stud MountingFront and RearAppendix90