12.07.2015 Views

Material Safety Data Sheet - Movac Group Limited

Material Safety Data Sheet - Movac Group Limited

Material Safety Data Sheet - Movac Group Limited

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

DR<strong>Safety</strong> <strong>Data</strong> <strong>Sheet</strong>according to 1907/2006/EC, Article 31Page 3/6Printing date 22.05.2008 Revision: 06.04.2008Trade name: 14 Line Polyurethane (contains lead)· Ingredients with limit values that require monitoring at the workplace:7758-97-6 lead chromateWEL Long-term value: 0.5 mg/m³as Cr1330-20-7 Xylene (mix)WEL Short-term value: 441 mg/m³, 100 ppmLong-term value: 220 mg/m³, 50 ppmSk; BMGV· Additional information: The lists valid during the making were used as basis.(Contd. of page 2)· Personal protective equipment:· General protective and hygienic measures:Keep away from foodstuffs, beverages and feed.Immediately remove all soiled and contaminated clothingWash hands before breaks and at the end of work.Store protective clothing separately.· Respiratory protection:In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposureuse respiratory protective device that is independent of circulating air.· Protection of hands:When skin exposure may occur, advice should be sought from the glove supplier on appropriate types andusage times for this product.Protective gloves`SThe glove material has to be impermeable and resistant to the product/ the substance/ the preparation.Selection of the glove material on consideration of the penetration times, rates of diffusion and thedegradation· <strong>Material</strong> of glovesThe selection of the suitable gloves does not only depend on the material, but also on further marks of qualityand varies from manufacturer to manufacturer. As the product is a preparation of several substances, theresistance of the glove material can not be calculated in advance and has therefore to be checked prior to theapplication.· Penetration time of glove materialThe exact break through time has to be found out by the manufacturer of the protective gloves and has to beobserved.· Eye protection:Tightly sealed goggles`R9 Physical and chemical properties· General InformationForm:Colour:Odour:· Change in conditionMelting point/Melting range: Undetermined.Boiling point/Boiling range: 137°C· Flash point: 38°CFluidAccording to product specificationCharacteristic(Contd. on page 4)GB

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!