Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Cat</strong> <strong>Ladders</strong><strong>Weland</strong> stock module system cat ladders and accessoriesfor all types of erection. If for any reasonstandard products do not suit, we can manufacturespecial types subject to requirement.All stock products of steel are hot dip galvanizedto offer best possible rust protection. Most productsare also available with lacquered surface(lacquered after hot dip galvanizing) in coloursblack or brick red. <strong>Weland</strong> cat ladders are typeapproved in accordance with SS 831340 andSS-EN ISO 14122-4.Access to roofheight between 4 and 8 metresProvide an exterior fixed cat ladder or interiorstaircase (BBR 8:2421).Gangway to ridge railing and servicepoint / chimneyRoof gangway can be applied for roof s lopes upto 12 degrees.Roof Access treads can be applied for roof slopesbetween 8 and 45 degrees.Roof access ladder can be applied forroof slopes exceeding 25 degrees.(BBR 8:2422 and 2426)Please note! <strong>Weland</strong> offers a completerange of roof safety products. Ask forour brochure “Safety on the Roof”.2 www.weland.co.uk
Escape Ways<strong>Weland</strong> cat ladders are approved in accordancewith SS 83 13 40 and SS-EN ISO14122-4. Fixed cat ladders are required forfaçade heights exceeding 4 m. The bottomend of cat ladders should be arranged at asuitable height above ground depending onthe accessibility required, but maximum1.5 metres above ground.<strong>Weland</strong> cat ladders are suitable for accessto towers, silos, bridge piers, chimneys etc.In case of high ladders, rest landings shouldbe provided. If hoop guards are mounted,these should end maximum 2.5 metresabove ground. We recommend that catladders exceeding 6 metres height shouldbe provided with hoop guards and restlandings.If escape ladders are combined with escapelandings, they must be provided with hoopguards to prevent stepping out into openspace.www.weland.co.uk3
LadderFixingFishplate<strong>Cat</strong> LadderLight ladder with good stability. The stringersare produced from roller formed U-profile.Rungs of profiled tube to reduce the risk of slippingand with swaged ends both on the insideand the out-side for double safety. Design followingSS 83 13 40 a nd SS-EN ISO 14122-4.LadderLength x width Part no. kg each1500 x 400 mm ST 1540 6.21800 x 400 mm ST 1840 7.52400 x 400 mm ST 2440 10.13000 x 400 mm ST 3040 12.6Fishplates (complete with bolts)Description Part no. kg/set1 set required per joint* SK 0250 0.6Set of screws BU 1201 0.2600Fixing PlateBracketMountingBracketAdjustableBracket* Mount with 4 off M10x20Pair of BracketsThe max. vertical distance between fixing pointsin the wall is 2500 mm. Arrange fixings closer ifthe wall allows it.Distance between Bracketwall and outer edge measure Part Weightof gutter (mm) no. kg/pair150 mm* 150 KS 0150 0.8300 mm* 300 KS 0300 1.2Adjustable 450-700 mm* 450-700 KS 4570 7.9Adjustable 700-1000 mm* 700-1000 KS 7010 10.1Set of screws, 10 off M10x20 BS1020 0.35Set of screws, 2 off M10x20 BS1022 0.1Fixing to floor TS4000 0.5Fixing plate to panel wall FP0300 0.44Set of screws
HandrailRest LandingHoopHoop Guard KitLockable HatchRest LandingHoop Guard for<strong>Cat</strong> LadderDesign following SS 831340.HandrailUsed for Length Part no. kg eachLadder with hoop 1350 mm HL 1350 5.2Set of screws* BS 1051 0.2* 1 off for ladders without hoop, 2 off for ladders with hoop.Rest LandingSize Part no. kg each300 x 400 mm, adjustable 0-20° SP 3044 3.3Set of screws, 1 set per landing BS 1022 0.1Rest Landing for<strong>Cat</strong> LadderFor increased safety a rest landing should be providedfor ladders exceeding 6 metres height. Thedistance between the rest landings mounted onvery high ladders should not exceed 6 metres.Design following SS 831340.Rest LandingThe rest landing consists of the following components:1 grating with edging, 4 angle brackets, 4“half” hoops, 2 horizontal and 7 vertical flats.Description Part no. kg eachRest landing 600 x 600 mm VP 6060 33.4For each rest landing 2.1 m extra ladder are required.HoopDescription (mm) Part no. kg eachSet of hoops* SK 0650 2.1Hoop guard kit, 5 off bars, 900 SK 9005 2.95Hoop guard kit, 7 off bars, 900 SK 9007 4.1Set of screws M10x20, 10 off BS 1020 0.35* 7 off screws required per hoop witzh 5 bars.Lockable HatchDescription Part no. kg eachLockable hatch for hoop SK 0500 4.2www.weland.co.uk5
8 www.weland.co.uk
Folding <strong>Cat</strong> LadderFolding cat ladder of hot dip galvanized steel. In order to achieve a smoothand appealing surface the ladders are grey colour powder coated as standard.It can be mounted on all types of building, and when folded against thefaçade, looks just like a 45 mm wide bar. It is unfolded by pulling the ropeoutside the window.ESCAPE LADDEROUTSIDE THE WINDOWInstructions:1.Open the windowand pull the rope2.Normally the ladderunfolds itself. If not,pull it outwards.Ladderwww.weland.co.uk5003001200Length x Width Part no. kg each1200 x 500 mm FB 1250 7.52400 x 500 mm FB 2450 15.5Fishplates(complete with one rung and bolt)Description Part no. kg/setRequired one set per ladder and joint FB 2000 1.0Length of ladder 2400BracketDistance between Distance kgwall and ladder between stays Part no. each15-25 mm 900-1200 mm FB 0012 0.2(standard bracket)150 mm 900-1200 mm KS 0150 0.8300 mm 900-1200 mm KS 0300 1.2Set of bolts for fixing BS 1060 0.1brackets to ladder(for 5 off brackets)Top Part, Rope and SignDescription Part no. kg/setTop part FB 1000 0.2Rope sold by the metre FB 0010 -Instruction sign FB 0001 -3.Climb downcautiously9
Ladder in normal positionLadder unfoldedTopRopeBracketGrab Handle and Rest LandingDescription Part no. kg eachGrab Handle, mounting onto wall HL0300 0.8Rest Landing, mounting onto wall SP0400 3.7Grab handleRest landing10 www.weland.co.uk
Fixing AlternativesStainless Through RodComplete with nut and square washer100 x 100 mm.Description Length Part no. kg eachStainless threaded rod* 1000 mm RS 1010 1.0Stainless threaded rod* 500 mm RS 1050 0.6Stainless threaded rod* 250 mm RS 1025 0.3* M10Expansion Bolt for fixing into concreteDescription Length Part no. kg eachHot dip galv. M10 100 mm EB 1010 0.2French Screw with PlugDescription Part no. kg eachSet of screws (4 off) FS 1065 0.410 x 65 mmPlanning Guidelines:Length of rope + 0.5 m•Additional anticipated length of rope + 0.5 m1)Measure to bottom edge of top windowLength of ladderChoose ladderMeasureaccordingto 1)Lengthofladder-2.5 m 2.4 m2.5-3.7 m 3.6 m3.7-4.9 m 4.8 m4.9-6.1 m 6.0 metc.www.weland.co.uk11
For more information regarding<strong>Weland</strong> products visitwww.weland.co.uk1106 www.industrireklam.se Hylte Tryck AB<strong>Weland</strong> <strong>Ltd</strong> • Hardley Industrial Estate • Hardley • Southampton • Hampshire SO45 3NQTelephon: 02380 849747 • Telefax: 02380 849054E-mail: info@weland.co.uk • Homepage: www.weland.co.uk<strong>Weland</strong> <strong>Ltd</strong> reserve the right to changes of design. All rights reserved.
Change language