Reason Ref - SampleKings

The Edit modeThe Edit mode allows you to edit events inside a clip. This is where you perform detailedediting of note and automation events.Opening a clip in Edit modeD To edit the contents of a note clip, double-click it, or select it and press[Return].Opening a note clip automatically switches the sequencer to Edit mode.D To select Edit mode, click the Edit/Arrange mode button in the top leftcorner of the sequencer area.Double-clicking a note clip in Arrange mode...Edit mode selected with a note clip open for editing.You can also toggle between Arrange mode and Edit mode by pressing [Shift]-[Tab] or [Command]/[Ctrl]+[E].Selecting what to editThe Edit mode always shows the contents of a single track (or for a single note laneon a track) at a time. Only one note lane can have edit focus at a time.D If one track is selected when you enter Edit mode, that track contents willbe shown.All clips on this note lane will be shown and available for editing but no clips will beopen, and the clip events will be grayed out. To be able to edit or draw notes or automationevents, you need to open a clip, as described below.D If the track has multiple note lanes it will show the contents of the currentlyselected note lane.To switch between note lanes, click on the note lane handle....opens it for editing in Edit mode. An open clip in Edit mode is highlighted.D You can change track at any time, by clicking in the track list.This way you can stay in Edit mode and select different tracks and note lanes forediting, without having to go back to Arrange mode.D Double-clicking a automation clip will open it for editing in Arrangemode which is convenient for quick editing of a single parameter.All track parameter automation clips for a track are shown and can be edited inEdit mode. How to edit automation is described on page 85.78THE SEQUENCER