If you're waiting for hot water, - PEX Universe

Hot water without the waste!Have hot water at your fingertips wheneveryou turn the faucet. Stop wasting water asyou wait for cold to turn to hot. Stop burningenergy as you wait for warm to turn warmer.The Taco D’MAND ® System puts an end tothe waste – and the wait – forever.How D’MAND ® works…The D’MAND ® System is a small, silent pumpattached to your hot and cold water lines in1 234activated, the cool water you normally let runthe cabinet under your most remote kitchenor bath fixture. When D’MAND ® System isdown the drain is circulated back to the waterheater through the cold water line.At your “demand,” the pump circulates hotwater from the water heater, and returns thecooled water back through the cold water line.When the hot water arrives at the faucet, theD’MAND ® System’s patented heat sensor andcontrol board shut off the pump to preventpumping excess hot water into the cold water line.D’MAND ® System is easy to install.No new piping required.The D’MAND ® System not only saves waterand energy, it saves in construction costs aswell. No new return line is necessary; no needto drain the system; no demolition and repair.In fact, D’MAND ® System can be installed injust eight simple steps.D’MAND ® System delivfixture, while cold waterStep 1:Select the mostdistant fixture fromthe water heaterStep 2:Remove AngleStopsStep 3:Install T’sStep 4:ReattachStopsActivate D’MAND ® only when youneed it.D’MAND ® System only runs when you tellit to, and it’s smart enough to know whenthe water currently in the line is hot enough.D’MAND ® System can be activated with thepush of a button, or with an optional wirelessremote transmitter/receiver.