Optical Systems - WinLens

LINOS distributors: Refer to Service Worldwide at the end of this catalog
Optical Systems
page 85
Laser monochromats 86
Laser monochromats with negative focal lengths 86
High Aperture Laser Objectives (HALOs) 88
Laser beam expander system 4x 90
Laser beam expander system 7x 90
Laser beam expander system 10x 91
Laser beam expander system 15x 91
Laser beam expander system 16x 92
Laser beam expander system 16x with spatial filter 92
Laser beam expander system 25x 93
Laser beam expander system 25x with spatial filter 93
Laser beam expander system 50x with spatial filter 94
Laser beam expander system 75x with spatial filter 95
Adapter 1“/W0.8“ or ø 25 mm 96
Adapter W0.8“/1“ 96
Laser line projector 96
Adapter C-Mount/M30x1 97
Laser Beam Expander Systems bm.x 98
Introduction to Laser beam Homogenizer 100
Laser Beam Homogenizer for Microbench 101
Laser Beam Homogenizer, System 40 / 65 mm 102
Condenser combination, f = 16 mm, crown glass 104
Condenser combination, f = 16 mm, fused silica 104
Condenser for Lamphouse, Crown glass singlet 105
Condensers for Lamphouse, Crown glass doublet 105
Condensers for Lamphouse, Fused silica singlet 105
Condensers for Lamphouse, Fused silica doublet 106
Fiber light guide with condenser 106
Three lens condenser 107
Three lens condenser, UV 107
Kellner eyepiece 108
Erfle / Orthoscopic eyepieces 108
Microprojection Lens System 109
Infinity-Corrected Objectives 110
MeVis-C CCD-Camera Measuring Lenses (C-Mount) 112
Measuring Telescopes 114
Image reversal system 115
Auxiliary close-up lenses, mounted 115
Mounting ring 115
Autocollimator AK 50 116
www.linos.com
Optical
Systems

page 86 Optical Systems
Laser monochromats
•
•
•
•
•
•
•
air-spaced doublets
no cement to absorb laser radiation
provide excellent imaging over a broad wavelength range
(450-1100 nm)
minimal spherical aberration
ARBS type broadband anti-reflection coating optimized for
λ=450-650 nm and λ=1064 nm
withstands high energy densities (> 10 J/cm 2 for 10 ns laser
pulses at 1064 nm)
mounts having outer diameter of 25 and 30 mm mate to
Microbench
Laser monochromats with positive focal lengths
Order-No f‘
(mm)
d clear ø
1
(mm)
mounted outer-ø D
(mm)
L (mm) l (mm) 1 l (mm) 2 s‘ 488 nm
(mm)
s‘ 514 nm
(mm)
G033481000 Í 20 4.5 yes 25 18 4.1 10.3 17.16 17.19
G033484000 Í 60 14 yes 25 24 2.4 10.4 53.58 53.54
G033486000 Í 120 22 yes 30 27 1.1 10.0 113.00 112.99
G033490000 200 45 yes 63 48.5 2.7 22.6 182.54 182.56
G033493000 310 73 yes 94 50 4.1 16.5 287.53 287.57
Í in mount mating directly to Microbench
Laser monochromats with negative focal lengths
•
•
•
•
•
•
•
air-spaced doublets
no cement to absorb laser radiation
provide excellent imaging over a broad wavelength range
(450-1100 nm)
minimal spherical aberration
ARBS type broadband anti-reflection coating optimized for
λ=450-650 nm and λ=1064 nm
withstands high energy densities (> 10 J/cm 2 for 10 ns laser
pulses at 1064 nm)
mounts having outer diameter of 25 ans 30 mm mate to
Microbench
Laser monochromats with negative focal lengths
Í in mount mating directly to Microbench
LINOS, USA
Phone +1 (508) 478-6200
E-mail info@linos.com
LINOS, UK
Phone +44 (0) 1908 262525
E-mail sales@linos.co.uk
Transmission curve of ARBS coating
Transmission curve of ARBS coating
Order-No f‘ (mm) d clear ø
1
(mm)
mounted outer-ø D
(mm)
L (mm) l (mm) 1 l (mm) 2 s‘ 488 nm
(mm)
s‘ 514 nm
(mm)
G033497000 Í -20 5.5 yes 25 18 5.3 10.5 -19.99 -20.12
G033499000 Í -40 9.5 yes 25 20.5 5.6 10.5 -40.14 -40.42
LINOS, France
Phone +33 (0)4 72 52 04 20
E-mail info-fr@linos.com
LINOS, Germany
Phone +49 (0)551 69 35-0
E-mail sales@linos.de

s‘ 633 nm
(mm)
s‘ 647 nm
(mm)
s‘ 694 nm
(mm)
s‘ 780 nm
(mm)
s‘ 1064 nm
(mm)
f‘ 488 nm
(mm)
f‘ 514 nm
(mm)
f‘ 633 nm
(mm)
f‘ 647 nm
(mm)
f‘ 694 nm
(mm)
f‘ 780 nm
(mm)
f‘ 1064 nm
(mm)
17.22 17.23 17.25 17.28 17.38 19.90 19.91 19.95 19.95 19.97 20.00 20.10
53.46 53.48 53.51 53.52 53.77 59.64 59.63 59.66 59.68 59.71 59.77 60.03
113.02 113.02 113.09 113.21 113.69 119.55 119.57 119.73 119.76 119.84 120.00 120.56
182.86 182.91 183.04 183.33 184.27 199.64 199.67 200.00 200.05 200.20 200.49 201.45
278.99 288.07 288.29 288.71 290.17 309.45 309.50 310.02 310.09 310.33 310.77 312.27
page 87
f´ focal length
s´ back focal length
D outer diameter
d clear-aperture
1
distance from forward edge of mount to vertex of first lens
l 1
element
l distance from rear edge of mount to vertex of second lens
2
element
L mount length
F´ back focal point
Tolerances:
focal length f´: ± 1 %
image distance s´: ± 1 %
f´ focal length
s´ back focal length
D outer diameter
d clear-aperture
1
distance from forward edge of mount to vertex of first lens
s‘ 633 nm
(mm)
s‘ 647 nm
(mm)
s‘ 694 nm
(mm)
s‘ 780 nm
(mm)
s‘ 1064 nm
(mm)
f‘ 488 nm
(mm)
f‘ 514 nm
(mm)
f‘ 633 nm
(mm)
f‘ 647 nm
(mm)
f‘ 694 nm
(mm)
f‘ 780 nm
(mm)
f‘ 1064 nm
(mm)
-20.53 -20.56 -20.66 -20.80 -21.06 -18.92 -19.05 -19.46 -19.45 -19.59 -19.72 -19.98
-41.31 -41.38 -41.58 -41.87 -42.41 -37.74 -38.02 -38.86 -38.93 -39.13 -39.41 -39.95
l 1
element
l distance from rear edge of mount to vertex of second lens
2
element
L mount length
F´ back focal point
Tolerances:
focal length f´: ± 1 %
image distance s´: ± 1 %
www.linos.com
Optical
Systems

page 88 Optical Systems
High Aperture Laser Objectives (HALOs)
•
•
•
•
•
•
•
higher numerical aperture than achromats or laser monochromats
application as focussing element of laser radiation at large
aperture result in minimum spot size
alternative application as collimating element for divergent
monochromatic light
high precision optical elements mounted in tight-toleranced
anodized aluminum housing results in optimum overall performance
standard type (cemented achromat and aplanatic meniscus
lens) for low power applications with ARB2-line coating
high-power type (air-spaced laser monochromat and aplanatic
meniscus lens) for laser applications with ARBS-coating
mounts having outer diameters of 25 and 30 mm mate to
Microbench
High aperture laser objectives
Order-No f (mm) NA mounted
Í in mount mating directly to Microbench
LINOS, USA
Phone +1 (508) 478-6200
E-mail info@linos.com
outer-ø
D (mm)
clear ø
d 1 (mm)
LINOS, UK
Phone +44 (0) 1908 262525
E-mail sales@linos.co.uk
Tranmission curve of the standard ARB2 for HALOs
Transmission curve of ARBS for High-power HALOs
clear ø
d 2 (mm)
LINOS, France
Phone +33 (0)4 72 52 04 20
E-mail info-fr@linos.com
L (mm) l 1 (mm) l 2 (mm) s‘ 488 nm
(mm)
G038911000 5 0.5 yes 12.5 5.0 3.5 10.0 3.4 0.9 2.00 2.01
G038901000 14 0.32 yes 12.5 9.0 8.0 11.5 2.3 2.5 10.51 10.54
G038900000 14 0.21 H yes 12.5 6.0 4.5 10.0 2.1 1.8 9.86 9.89
G038903000 Í 30 0.38 yes 30.0 23.0 22.0 22.5 1.7 5.3 21.10 21.21
G038902000 Í 30 0.26 H yes 25.0 15.0 14.0 24.5 2.2 5.7 21.06 21.16
G038904000 50 0.31 yes 40.0 30.5 26.0 26.0 1.8 5.7 39.17 39.33
G038906000 60 0.29 yes 50.0 35.5 36.0 29.0 2.6 6.4 51.23 51.48
G038905000 60 0.19 H yes 40.0 24.0 21.0 29.0 2.3 3.7 51.10 51.34
G038907000 Í 90 0.13 yes 30.0 23.0 22.0 22.5 6.0 3.3 80.54 80.71
G038908000 Í 90 0.13 H yes 30.0 23.0 21.0 28.5 3.5 3.1 79.29 79.46
s‘ 514 nm
(mm)
G038909000 150 0.16 yes 63.0 48.0 45.0 33.0 3.4 8.1 134.49 134.82
G038910000 150 0.16 H yes 63.0 48.0 45.0 43.5 3.5 7.8 128.13 128.46
LINOS, Germany
Phone +49 (0)551 69 35-0
E-mail sales@linos.de

s‘ 633 nm
(mm)
s‘ 647 nm
(mm)
s‘ 694 nm
(mm)
s‘ 780 nm
(mm)
s‘ 1064 nm
(mm)
f‘ 488 nm
(mm)
For standard applications (low power)
f‘ 514 nm
(mm)
f‘ 633 nm
(mm)
f‘ 647 nm
(mm)
f‘ 694 nm
(mm)
f‘ 780 nm
(mm)
2.06 2.07 2.08 2.09 2.13 4.84 4.86 4.84 4.95 4.97 5.00 5.06
10.63 10.64 10.67 10.71 10.80 13.94 13.98 14.09 14.10 14.13 14.18 14.29
10.00 10.01 10.04 10.08 10.18 13.70 13.74 13.87 13.89 13.91 13.96 14.07
21.57 21.60 21.68 21.81 22.09 29.14 29.28 29.70 29.74 29.84 30.00 30.32
21.50 21.53 21.61 21.73 21.99 28.67 28.81 29.23 29.26 29.37 29.51 29.82
39.81 39.85 39.98 40.17 40.59 48.89 49.07 49.62 49.67 49.81 50.02 50.49
52.25 52.31 52.50 52.77 53.34 60.40 60.68 61.53 61.60 61.81 62.11 62.72
52.07 52.13 52.32 52.58 53.14 60.06 60.34 61.19 61.26 61.47 61.77 62.40
81.28 81.33 81.50 81.75 82.41 89.02 89.21 89.82 89.87 90.04 90.31 91.00
80.04 80.10 80.26 80.50 81.11 89.08 89.29 89.98 90.04 90.23 90.51 91.17
page 89
f´ focal length
s´ back focal length
D outer diameter
d clear-aperture
1
distance from forward edge of mount to vertex of first lens
f‘ 1064 nm
(mm)
135.91 136.01 136.31 136.77 137.92 147.66 148.01 149.16 149.27 149.58 150.07 151.27
129.54 129.64 129.94 130.38 131.45 148.52 148.86 150.00 150.10 150.41 150.88 151.99
l 1
element
l distance from rear edge of mount to vertex of second lens
2
element
L mount length
F´ back focal point
Tolerances:
focal length f´: ± 1 %
image distance s´: ± 1 %
For high-power laser applications
f´ focal length
s´ back focal length
D outer diameter
d clear-aperture
1
distance from forward edge of mount to vertex of first lens
l 1
element
l distance from rear edge of mount to vertex of second lens
2
element
L mount length
F´ back focal point
Tolerances:
focal length f´: ± 1 %
image distance s´: ± 1 %
www.linos.com
Optical
Systems

page 90 Optical Systems
Laser beam expander system 4x
•
•
•
•
•
•
•
•
•
•
•
•
•
To generate plane wave fronts
To focus laser beams at long distances
To reduce laser beam divergence
To use in alignment work or optoelectronic control systems
Equipped with focusable exit optics
Entrance aperture: ø 4 mm
Exit aperture: ø 16 mm
Entrance element: plano-concave singlet
Exit element: focusable from 0.5 m to ∞
Mating thread: 1“ x 1/32“
Fits directly onto most lasers
Broadband anti-reflection coated with ARB2 for
λ = 450-700 nm
Adaptable to Microbench
Laser beam expander system 4x
Order-No Item title
G038658000 Laser beam expander system 4x
Laser beam expander system 7x
•
•
•
•
•
•
•
•
•
•
•
•
•
To generate plane wave fronts
To focus laser beams at great distances
To reduce laser beam divergence
To use in alignment work or optoelectronic control systems
Equipped with focusable exit optics
Entrance aperture: ø 4 mm
Exit aperture: ø 16 mm
Entrance element: plano-concave singlet
Exit element: focusable from 1.5 m to ∞
Mating thread: 1“ x 1/32“
Fits directly onto most lasers
Broadband anti-reflection coated with ARB2 for λ = 450-700
nm
Adaptable to Microbench
Laser beam expander system 7x
Order-No Item title
G038659000 Laser beam expander system 7x
LINOS, USA
Phone +1 (508) 478-6200
E-mail info@linos.com
LINOS, UK
Phone +44 (0) 1908 262525
E-mail sales@linos.co.uk
LINOS, France
Phone +33 (0)4 72 52 04 20
E-mail info-fr@linos.com
LINOS, Germany
Phone +49 (0)551 69 35-0
E-mail sales@linos.de

Laser beam expander system 10x
•
•
•
•
•
•
•
•
•
•
•
•
•
To generate plane wave fronts
To focus laser beams at great distances
To reduce laser beam divergence
To use in alignment work or optoelectronic control systems
Equipped with focusable exit optics
Entrance aperture: ø 3 mm
Exit aperture: ø 17 mm
Entrance element: air-spaced achromat
Exit element: focusable from 1.5 m to ∞
Mating thread: 1“ x 1/32“
Fits directly onto most lasers
Broadband anti-reflection coated with ARB2 for
λ = 450-700 nm
Adaptable to Microbench
Laser beam expander system 10x
Order-No
G038662000 Laser beam expander system 10x
Laser beam expander system 15x
•
•
•
•
•
•
•
•
•
•
•
•
•
•
To generate plane wave fronts
To focus laser beams at great distances
To reduce laser beam divergence
To use in alignment work or optoelectronic control systems
Equipped with focusable exit optics
Entrance aperture: ø 3 mm
Exit aperture: ø 30 mm
Entrance element: biconvex singlet
Exit element: focusable from 10 m to ∞
Corrected for spherical aberration at 633 nm
Mating thread: 1“ x 1/32“
Fits directly onto most lasers
Broadband anti-reflection coated with ARB2 for
λ = 450-700 nm
Adaptable to Microbench
Laser beam expander system 15x
Order-No
G038650000 Laser beam expander system 15x
page 91
www.linos.com
Optical
Systems

page 92 Optical Systems
Laser beam expander system 16x
•
•
•
•
•
•
•
•
•
•
•
•
•
•
To generate plane wave fronts
To focus laser beams at great distances
To reduce laser beam divergence
To use in alignment work or optoelectronic control systems
Equipped with focusable exit optics
Entrance aperture: ø 3 mm
Exit aperture: ø 30 mm
Entrance element: centerable achromat, air-spaced
Exit element: focusable from 10 m to ∞
Wavefront distortion: < λ/8 at 633 nm
Mating thread: 1“ x 1/32“
Fits directly onto most lasers
Broadband anti-reflection coated with ARB2 for
λ = 450-700 nm
Adaptable to Microbench
Laser beam expander system 16x
Order-No Item Title
G038652000 Laser beam expander systems 16x
Laser beam expander system 16x with spatial filter
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
To generate plane wave fronts
To focus laser beams at great distances
To reduce laser beam divergence
To use in alignment work or optoelectronic control systems
Equipped with focusable exit optics
Entrance aperture: ø 3 mm
Exit aperture: ø 30 mm
Entrance element: centerable achromat
Exit element: focusable from 10 m to ∞
Wavefront distortion: < λ / 8 at 633 nm
Spatial filter: for 16 x: ø = 30 µm adjustable in X, Y and Z
Mating thread: 1“ x 1/32“
Fits directly onto most lasers
Broadband anti-reflection coated with ARB2 for
λ = 450-700 nm
Adaptable to Microbench
Laser beam expander system 16x with spatial filter
Order-No Item title
G038654000 Laser beam expander system 16x with spatial filter
LINOS, USA
Phone +1 (508) 478-6200
E-mail info@linos.com
LINOS, UK
Phone +44 (0) 1908 262525
E-mail sales@linos.co.uk
LINOS, France
Phone +33 (0)4 72 52 04 20
E-mail info-fr@linos.com
LINOS, Germany
Phone +49 (0)551 69 35-0
E-mail sales@linos.de

Laser beam expander system 25x
•
•
•
•
•
•
•
•
•
•
•
•
•
•
To generate plane wave fronts
To focus laser beams at great distances
To reduce laser beam divergence
To use in alignment work or optoelectronic control systems
Equipped with focusable exit optics
Entrance aperture: ø 3 mm
Exit aperture: ø 30 mm
Entrance element: centerable achromat
Exit element: focusable from 10 m to ∞
Wavefront distortion: < λ/8 at 633 nm
Mating thread: 1“ x 1/32“
Fits directly onto most lasers
Broadband anti-reflection coated with ARB2 for
λ = 450-700 nm
Adaptable to Microbench
Laser beam expander system 25x
Order-No Item title
G038653000 Laser beam expander system 25x
Laser beam expander system 25x with spatial filter
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
To generate plane wave fronts
To focus laser beams at great distances
To reduce laser beam divergence
To use in alignment work or optoelectronic control systems
Equipped with focusable exit optics
Entrance aperture: ø 3 mm
Exit aperture: ø 30 mm
Entrance element: centerable achromat
Exit element: focusable from 10 m to ∞
Wavefront distortion: < λ /8 at 633 nm
Spatial filter for 25x: ø = 20 µm adjustable in X, Y and Z
Mating thread: 1“ x 1/32“
Fits directly onto most lasers
Broadband anti-reflection coated with ARB2 for
λ = 450-700 nm
adaptable to Microbench
Laser beam expander system 25x with spatial filter
Order-No Item title
G038655000 Laser beam expander system 25x with spatial filter
page 93
www.linos.com
Optical
Systems

page 94 Optical Systems
Laser beam expander system 50x with spatial filter
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
To generate plane wave fronts
To focus laser beams at great distances
To reduce laser beam divergence
To use in alignment work or optoelectronic control systems
Equipped with focusable exit optics
Entrance aperture: ø 3 mm
Exit aperture: ø 78 mm
Entrance element: centerable best form lens
Exit element: focusable from 10 m to ∞
Wavefront distortion: < 1 λ at 633 nm
Spatial filter: ø = 10 µm adjustable in X, Y and Z
Mating thread: 1“ x 1/32“
Fits directly onto most lasers
Broadband anti-reflection coated with ARB2 for
λ = 450-700 nm
Adaptable to Microbench
Laser beam expander system 50x with spatial filter
Order-No Item title
G038657000 Laser beam expander system 50x with spatial filter
LINOS, USA
Phone +1 (508) 478-6200
E-mail info@linos.com
LINOS, UK
Phone +44 (0) 1908 262525
E-mail sales@linos.co.uk
LINOS, France
Phone +33 (0)4 72 52 04 20
E-mail info-fr@linos.com
LINOS, Germany
Phone +49 (0)551 69 35-0
E-mail sales@linos.de

Laser beam expander system 75x with spatial filter
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
to generate plane wave fronts
to focus laser beams at great distances
to reduce laser beam divergence
to use in alignment work or optoelectronic control systems
equipped with focusable exit optics
Entrance aperture: ø 3 mm
Exit aperture: ø 78 mm
Entrance element: centerable best form lens
Exit element: focusable from 10 m to ∞
Wavefront distortion: < 1 λ at 633 nm
Spatial filters: ø = 10 µm adjustable in X, Y and Z
Mating thread: 1“ x 1/32“
Fits directly onto most lasers
Broadband anti-reflection coated with ARB2 for
λ = 450-700 nm
Adaptable to Microbench
Laser beam expander system 75x with spatial filter
Order-No Item title
G038663000 Laser beam expander system 75x with spatial filter
page 95
www.linos.com
Optical
Systems

page 96 Optical Systems
Adapter 1“/W0.8“ or ø 25 mm
Accessories for Laser Beam Expander System
Adapter 1“/ W0.8“ or ø 25 mm
Order-No Item title
G061661000 Adapter 1“/ W0.8“ or ø 25 mm
Adapter W0.8“/1“
Accessories for Laser Beam Expander System
Adapter W0.8“/1“
Order-No Item title
G061662000 Adapter W0.8“/1“
Laser line projector
•
•
•
•
•
•
•
�
Converts circular laser beams into a narrow line
Mounts onto the entrance apertures of laser
Entrance aperture: ø 4 mm
Focal length: 5 mm
Mating thread: 1“ x 1/32“
For beam expander systems without spatial filters
broadband AR-coated for λ = 450-700 nm
Approx. line dimensions with 4x laser beam expander:
at 0.5 m distance: 25 mm x 0.3 mm
at 1 m distance: 60 mm x 0.5 mm
at 10 m distance: 600 mm x 5 mm
(each for a beam entrance ø = 1 mm)
Accesssories for Laser Beam Expander System
Laser line projector
Order-No Item title
G038660000 Laser line projector
LINOS, USA
Phone +1 (508) 478-6200
E-mail info@linos.com
LINOS, UK
Phone +44 (0) 1908 262525
E-mail sales@linos.co.uk
LINOS, France
Phone +33 (0)4 72 52 04 20
E-mail info-fr@linos.com
LINOS, Germany
Phone +49 (0)551 69 35-0
E-mail sales@linos.de

Adapter C-Mount/M30x1
For adaptation of the laser expansion systems bm.x
to components with C-mount connection:
•
•
Enables the connection to HeNe-lasers with C-mount threads
Serves as connection of the laser expansion systems bm.x to
the LINOS tube construction system C
Adapter C-Mount/M30x1
Order-No Item Title
G038699000 Adapter C-Mount/M30x1
page 97
www.linos.com
Optical
Systems

page 98 Optical Systems
Laser Beam Expander Systems bm.x
•
•
•
•
•
•
•
•
Modular setup
For laser beam expanding (exit aperture 30 mm)
Entrance lens fabricated from fused silica
To reduce laser beam divergence
Enables diffraction limited focus diameters in connection with
the high aperture laser objectives (HALOs)
Internal focusing
Quick change between different expansion ratios by modular
structure with BMX basic module and exchangeable BMX
inserts
ARBS coating for high power Nd:YAG-Laser (532 nm, 1064
nm) or ARB2 NIR coating for 750-1200 nm
Laser Beam Expander Systems bm.x
Order-No Expansion ratio Coating Wavelength (nm) Module
G038673000 3x ARBS 450-650/1064 Laser beam expander system
G038674000 4x ARBS 450-650/1064 Laser beam expander system
G038675000 5x ARBS 450-650/1064 Laser beam expander system
G038678000 8x ARBS 450-650/1064 Laser beam expander system
G038670000 10x ARBS 450-650/1064 Laser beam expander system
G038673911 3x ARBS 450-650/1064 bm.x insert
G038674911 4x ARBS 450-650/1064 bm.x insert
G038675911 5x ARBS 450-650/1064 bm.x insert
G038678911 8x ARBS 450-650/1064 bm.x insert
G038670911 10x ARBS 450-650/1064 bm.x insert
G038673525 3x ARB2 NIR 750-950 Laser beam expander system
G038674525 4x ARB2 NIR 750-950 Laser beam expander system
G038675525 5x ARB2 NIR 750-950 Laser beam expander system
G038678525 8x ARB2 NIR 750-950 Laser beam expander system
G038670525 10x ARB2 NIR 750-950 Laser beam expander system
G038673921 3x ARB2 NIR 750-950 bm.x insert
G038674921 4x ARB2 NIR 750-950 bm.x insert
G038675921 5x ARB2 NIR 750-950 bm.x insert
G038678921 8x ARB2 NIR 750-950 bm.x insert
G038670921 10x ARB2 NIR 750-950 bm.x insert
G038670905 ARBS bm.x basic module
G038670925 ARB2 NIR bm.x basic module
LINOS, USA
Phone +1 (508) 478-6200
E-mail info@linos.com
LINOS, UK
Phone +44 (0) 1908 262525
E-mail sales@linos.co.uk
LINOS, France
Phone +33 (0)4 72 52 04 20
E-mail info-fr@linos.com
LINOS, Germany
Phone +49 (0)551 69 35-0
E-mail sales@linos.de

Outline of the modular structure of the laser beam expander systems
Mounting Options
- direct mounting with M43x0.5
- mounting with flange D80
(M4 or M6 screws)
- mounting with clamp holder
Additional mounting components
- Flange D80 03 8669
- Clamp holder 35 06 1244
- Tube wrench 22/1.5 06 1105
page 99
www.linos.com
Optical
Systems

page 100 Optical Systems
Introduction to Laser beam Homogenizer
Many applications, e.g. from microscopy and material processing,
require a very even distribution of the illuminating light.
For this purpose, micro lens based homogenizers are available nowadays
for numerous light sources, ranging from excimer lasers to high
power LEDs.
Two general types are distinguished, Non-Imaging and Imaging
Homogenizers. Both types split the incident beam into small sub
beams. This is achieved by passage either through arrays of cylindrical
lenses in a crossed configuration, or through arrays of micro lenses.
The sub beams are then superimposed by a spherical lens in its focal
plane, leading to a homogeneously illuminated field. This spherical
lens is called Fourier lens, as it effectively performs a two dimensional
Fourier transformation.
The application itself should be considered when choosing between
Non-Imaging and Imaging Homogenizer. As an orientation aid one
should consider the Fresnel number, which is defined for micro lens
homogenizers by
where P LA represents the pitch of the micro lens array, D FT the size of
the flat top in the plane of homogenization, f FL the focal length of the
Fourier lens, and λ is the wavelength. The Fresnel number is the most
important determinant for laser beam homogenizers based on micro
lens arrays. As a general rule, the uniformity of the flat top increases
with higher Fresnel numbers.
Non-imaging homogenizers
Non-Imaging Homogenizers are built from one micro lens array and
one spherical lens (see figure above). The plane of homogenization
lies in the focal plane of the Fourier lens (FL), the size of the
homogeneously illuminated area is determined by:
LINOS, USA
Phone +1 (508) 478-6200
E-mail info@linos.com
LINOS, UK
Phone +44 (0) 1908 262525
E-mail sales@linos.co.uk
Non-Imaging Homogenizers often show dominant diffraction effects
due to Fresnel diffraction at the micro lens array. In practice, Fresnel
numbers of FN >10, or better FN >100, lead to homogeneous intensities.
Due to the connection of the Fresnel number with the size of the
flat top, Non-Imaging Homogenizers are the first choice for illuminating
large areas. For small Fresnel numbers of FN < 10, or when a
very even distribution is required, Imaging Homogenizers should be
chosen..
Imaging homogenizers:
Imaging Homogenizers are built from two micro lens arrays and one
spherical lens (see figure above). The plane of homogenization lies in
the focal plane of the Fourier lens (FL), the size of the homogenized
area is defined by:
LINOS, France
Phone +33 (0)4 72 52 04 20
E-mail info-fr@linos.com
with
Here, a 12 denotes the distance between the two micro lens arrays. As
with Non-Imaging Homogenizers, the incident beam is split into many
small sub beams with the first micro lens array. The second micro lens
array then acts, in combination with the spherical lens, like an array
of objective lenses, overlapping the sub beams of the first array in the
plane of homogenization. As the size of the flat top depends in this
case on the distance between the two arrays, it can easily be adjusted
by moving the second array. However, great care has to be taken that
the second array is not moved into the focus plane of the first array,
where it could be damaged by focussed high energy laser light.
Imaging Homogenizers usually use micro lens arrays of identical pitch.
The shape of the flat top is determined by the shape of the micro
lenses (e.g. square, round, hexagonal).
LINOS, Germany
Phone +49 (0)551 69 35-0
E-mail sales@linos.de

Laser Beam Homogenizer for Microbench
•
•
•
•
•
•
•
�
For homogenous intensity distributions
for laser and illumination systems
Production according to custom specifications
Pre-assembled and tested
Module consisting of microbench components
Design of a fly`s eye condenser
Quartz glass for applications from UV to IR
AR coating on request.
Order-No Item title
G061010000 Mounting plate 25
G061025000 Centering mounting plate 25
G063651000 Mount CL 22.5
G065220018 Aperture 10x10mm*
G065220017 Aperture 5x5mm*
*only one type of aperture needed (two times)!
Microlens arrays and Fourier lens depending on custom specifications.
�
Device consist of:
Please specify when ordering:
- beam diameter and divergence
- wavelength and laser power
- dimension and distance of the flat-top
page 101
www.linos.com
Optical
Systems

page 102 Optical Systems
Laser Beam Homogenizer, System 40 / 65 mm
•
•
•
•
•
•
•
•
�
For homogenous intensity distribution
Flat-top uniformities up to below 5% achievable
Compatible with various optics systems
For wavelengths from 193 nm to 3 µm
Low-power version (up to laser class 3B) / High-power version
(up to laser class 4) available
Edge steepnes < 20 %
Flatness factor < 0.9
Illumination of the entry aperture > 80%
Please specify when ordering:
- beam diameter and divergence
- wavelength and laser power
- dimension and distance of the flat-top
LINOS, USA
Phone +1 (508) 478-6200
E-mail info@linos.com
LINOS, UK
Phone +44 (0) 1908 262525
E-mail sales@linos.co.uk
System 40 mm System 65 mm
LINOS, France
Phone +33 (0)4 72 52 04 20
E-mail info-fr@linos.com
LINOS, Germany
Phone +49 (0)551 69 35-0
E-mail sales@linos.de

page 103
www.linos.com
Optical
Systems

page 104 Optical Systems
Condenser combination, f = 16 mm, crown glass
•
•
•
•
•
•
For uniform illumination
For use as collimators in large focal ratio illumination systems
Supplied in CL-mounts, ø 25 mm, 21.4 mm clear-aperture
Microbench-compatible
Re-arrangeable lens elements (see illustrations; all tools required
are included)
Consisting of: 2 plano-convex lenses f = 40 mm
(G312314000), 1 concave-convex lens f = 50 mm
(G315505000)
Condenser combination, f = 16 mm, crown glass
Order-No Item title
G063010000 Condenser combination, f = 16 mm, crown glass
Condenser combination, f = 16 mm, fused silica
•
•
•
•
•
•
•
For uniform illumination
For use as collimators in large focal ratio illumination systems
High transmittance in the UV
Supplied in CL-mounts, ø 25 mm, 21.4 mm clear-aperture
Microbench compatible
Re-arrangeable lens elements (see illustrations; all tools required
are included)
Consisting of: 2 plano-convex lenses f = 40 mm (G312286000),
1 concave-convex f = 50 mm (G315506000)
Condenser combination, f = 16 mm, fused silica
Order-No Item title
G063011000 Condenser combination, f = 16 mm, fused silica
LINOS, USA
Phone +1 (508) 478-6200
E-mail info@linos.com
LINOS, UK
Phone +44 (0) 1908 262525
E-mail sales@linos.co.uk
LINOS, France
Phone +33 (0)4 72 52 04 20
E-mail info-fr@linos.com
LINOS, Germany
Phone +49 (0)551 69 35-0
E-mail sales@linos.de

Condenser for Lamphouse, Crown glass singlet
•
•
•
•
•
•
•
Interchangeable lenses
Accepts ø 50 mm filters
Equipped with M55x0.75 internal thread
Includes an f = 40 mm aspherical condenser lens
ø 48 mm clear aperture
Focusable from s´ = 140 mm to s´ = ∞
Supplied in cylindrical mount
Condenser for Small Lamphouse, Crown glass singlet condenser
Order-No Item title
G035012000 Condenser for Small Lamphouse, Crown glass
singlet condenser
Condensers for Lamphouse, Crown glass doublet
•
•
•
•
•
•
•
Condensers for Lamphouse, Fused silica singlet
•
•
•
•
•
•
•
Interchangeable lenses
Accepts ø 50 mm filters
Equipped with M55x0.75 internal thread
Includes an f = 40 mm aspherical condenser lens plus f = 100
mm plano-convex lens
ø 48 mm clear aperture
Focusable from s´ = 50 mm to s´ = 120 mm
Supplied in cylindrical mount
Condensers for Small Lamphouse, Crown glass doublet condenser
Order-No Item title
G035013000 Condensers for Small Lamphouse, Crown glass doublet
condenser
Interchangeable lenses
Accepts ø 50 mm filters
Equipped with M55x0.75 internal thread
Includes an f = 42 mm fused silica best form condenser lens
ø 48 mm clear aperture
Focusable from s´ = 140 mm to s´ = ∞
Supplied in cylindrical mount
Condensers for Small Lamphouse, Fused silica singlet condenser
Order-No Item title
G035022000 Condensers for Small Lamphouse, Fused silica
singlet condenser
page 105
www.linos.com
Optical
Systems

page 106 Optical Systems
Condensers for Lamphouse, Fused silica doublet
•
•
•
•
•
•
•
Interchangeable lenses
Accepts ø 50 mm filters
Equipped with M55x0.75 internal thread
Includes f = 42 mm and f = 100 mm fused silica best form
condenser lenses
ø 48 mm clear aperture
Focusable from s´ = 50 mm to s´ = 120 mm
Supplied in cylindrical mount
Condensers for Small Lamphouse, Fused silica doublet condenser
Order-No Item title
G035023000 Condensers for Small Lamphouse, Fused silica doublet
condenser
Fiber light guide with condenser
•
•
•
•
•
Assembled with Microbench components
Fits to lamphouse
Includes two aspherical lenses
Includes silicate glass fiberoptic cable (ø 4 mm fiber bundle,
500 mm length)
Supplied with KG1 heat-absorbing filter
Fiber light guide with condenser
Order-No Item title
G030129000 Fiber light guide with condenser
LINOS, USA
Phone +1 (508) 478-6200
E-mail info@linos.com
LINOS, UK
Phone +44 (0) 1908 262525
E-mail sales@linos.co.uk
LINOS, France
Phone +33 (0)4 72 52 04 20
E-mail info-fr@linos.com
LINOS, Germany
Phone +49 (0)551 69 35-0
E-mail sales@linos.de

Three lens condenser
•
•
•
•
All elements fabricated from crown glass
Usable as doublet/triplet
Focal length f = 75 mm, ø 75 mm clear aperture
Accepts iris diaphragm (G100500000)
Three lens condenser
Order-No Item title
G035006000 Three lens condenser
Three lens condenser, UV
•
•
•
•
All elements fabricated from fused silica
Usable as doublet/triplet
Focal length f = 75 mm, ø 75 mm clear aperture
Accepts iris diaphragm (G100500000)
Three lens condenser, UV
Order-No Item Title
G035026000 Three lens condenser, UV
page 107
www.linos.com
Optical
Systems

page 108 Optical Systems
Kellner eyepiece
•
•
•
•
•
•
For viewing intermediate images
Adaptable for use on Microbench
Eyepiece focal length f eyepiece = 250 mm/Mag.
Broadband anti-reflection coated for λ = 450-700 nm
Supplied in standard ø 23.2 mm mounts
Reticles may be inserted in front of the eye lens
Kellner eyepiece
Order-No Mag.
±5%
L
(mm)
LINOS, USA
Phone +1 (508) 478-6200
E-mail info@linos.com
Intermediate
image diameter
(mm)
G063310000 12.5x 35.4 17.5 8
Erfle / Orthoscopic eyepieces
•
•
•
•
•
•
•
For viewing intermediate images
Adaptable for use on Microbench
Ultralow imaging distortion
Eyepiece focal length f eyepiece = 250 mm/Mag.
Broadband anti-reflection coated for λ= 450-700 nm
Supplied in standard ø 23.2 mm mounts
Also available with a choice of reticles
Erfle / Orthoscopic eyepieces without reticle
Order-No Mag. ±
5%
L
(mm)
Intermediate
image diameter
(mm)
G038251000 10x 54 16 16
G038247000 12.5x 48 16 14
G038243000 16x 42 13 13
G038240000 25x 29 6.5 8
Erfle / Orthoscopic eyepieces with reticle
200 divisions over 10 mm
Order-No Mag. ±
5%
L
(mm)
Intermediate
image diameter
(mm)
G038252000 10x 54 16 16
G038248000 12.5x 48 16 14
G038244000 16x 42 13 13
Image
distance s´
(mm)
distance s´
(mm)
distance
s´ (mm)
LINOS, UK
Phone +44 (0) 1908 262525
E-mail sales@linos.co.uk
Erfle / Orthoscopic eyepieces with reticle
crosshairs plus double line scale center
Order-No Mag. ±
5%
Erfle / Orthoscopic eyepieces with reticle
200 divisions over 5 mm
Order-No Mag. ±
5%
L
(mm)
L
(mm)
LINOS, France
Phone +33 (0)4 72 52 04 20
E-mail info-fr@linos.com
Intermediate
image diameter
(mm)
G038253000 10x 54 16 16
G038249000 12.5x 48 16 14
G038245000 16x 42 13 13
G038242000 25x 29 6.5 8
Intermediate
image diameter
(mm)
G038241000 25x 29 6.5 8
distance s´
(mm)
distance s´
(mm)
LINOS, Germany
Phone +49 (0)551 69 35-0
E-mail sales@linos.de

Microprojection Lens System
•
•
•
•
�
�
Superb imaging over entire field of view
Optimized for use at moderate magnifications
4- or 5-element compound lenses
Adaptable to Microbench
Custom microprojection objectives with other focal lengths,
diameters, or fabricated from other choices of optical glasses
are available for higher quantities by special order
for Microbench applications use Adapter 16, G061622000 or
Adapter 19, G061623000 (depending on mount diameter D)
in chapter Microbench, section Adapters
Microprojection Objectives
page 109
F, F´ object/image focal points
f´ focal length
sF distance from object focal point to vertex of first lens element
s´ F´ distance from image focal point to vertex of last lens element
d barrel outer diameter
d1 clear-aperture diameter of first lens element
d2 clear-aperture diameter of last lens element
L mount length
l1 distance from forward edge of mount to vertex of first lens element
l2 distance from rear edge of mount to vertex of second lens element
EP entrance pupil
sEP distance from EP to vertex of first lens element
w field-of-view half-angle (the table below lists values of 2w)
k f-number (see table below)
β´ optimum magnification
Order-No f‘
(mm)
k 2w (°) β‘ sF (mm)
s‘ F‘
(mm)
sEP (mm)
D
(mm)
d1 (mm)
d2 (mm)
L
(mm)
l1 (mm)
l2 (mm)
G038814000 22.5 3.5 42 1:30 -20.12 19.53 2.87 16.0 6.0 5.5 15.0 6.9 1.9
G038840000 25 3.0 43 1:25 -21.00 19.58 4.97 16.0 9.0 8.0 17.0 0.2 6.7
G038842000 30 3.5 43 1:22 -25.36 23.18 6.42 16.0 8.7 8.7 14.0 0.5 2.3
G038846000 44 4.5 44 1:14 -40.01 38.19 5.70 19.0 10.5 11.5 17.0 3.0 2.0
G038731000 50 4.5 42 1:14 -43.52 42.73 7.20 19.0 13.0 12.0 16.0 0.4 1.6
G038848000 60 6.0 46 1:14 -53.43 52.28 7.09 19.0 13.0 13.0 18.0 1.5 0.5
www.linos.com
Optical
Systems

page 110 Optical Systems
Infinity-Corrected Objectives
The infinity-corrected objectives offer increased resolution when
compared to Mitutoyo´s M Plan Apo series.
•
•
•
•
Long working distances
High Performance
M26 x 0.706 mm thread (Mitutoyo compatible)
95 mm parfocal length
Infinity-Corrected Objectives
Order-No Item Title Magnification Numercial Working Distance, Focal length Resolution
Aperture, NA WD (mm) (mm) power (µm)
G038750000 Objective High-Res 5x *) 5x 0.225 34.0 40.0 1.20
G038751000 Objective High-Res 10x *) 10x 0.45 19.0 20.0 0.70
G038752000 Objective High-Res 20x *) 20x 0.60 13.0 10.0 0.45
G038753000 Objective LWD 10x *) 10x 0.30 34.0 20.0 1.12
*) High-Res = High Resolution, LWD = Long Working Distance
LINOS, USA
Phone +1 (508) 478-6200
E-mail info@linos.com
LINOS, UK
Phone +44 (0) 1908 262525
E-mail sales@linos.co.uk
LINOS, France
Phone +33 (0)4 72 52 04 20
E-mail info-fr@linos.com
LINOS, Germany
Phone +49 (0)551 69 35-0
E-mail sales@linos.de

High Resolution 5x
High Resolution 20x
High Resolution 10x
High Resolution, Long Working Distance, 10x
Depth of Focus Maximum Field Field of view 2/3“ Field of view 1/2“ Dimensions Weight (g)
(µm)
diameter (mm) (mm)
(mm)
(Max. dia. x L)
5.4 11.0 1.8 x 1.32 1.28 x 0.96 34.0 x 61.0 mm 210
2.0 11.0 0.88 x 0.66 0.64 x 0.48 34.0 x 76.0 mm 205
0.76 11.0 0.44 x 0.33 0.32 x 0.24 34.0 x 82.0 mm 240
6.11 2.4 1.1 diag. 0.8 diag. 34.0 x 61.0 mm 314
page 111
www.linos.com
Optical
Systems

page 112 Optical Systems
MeVis-C CCD-Camera Measuring Lenses (C-Mount)
•
•
•
•
•
•
•
•
•
•
•
�
�
�
�
�
�
�
Suitable for use in the near IR region, spectral range 450 nm
to 900 nm
C-Mount thread to connect to CCD-cameras
Focusing and aperture rings lockable
Free of irritating color fringes
No color shading when using 3 chip cameras with beam
splitters
Optimized for a large magnification range
Motorized version available (MeVis-Cm)
Easy integration
Robust design
Maximum sensor size 2/3“ for f = 12 mm and 16 mm and 1“
for f = 25 mm, 35 mm and 50 mm
Filter thread M35.5 x 0.5
Technical data motorized version MeVis-Cm:
Motorization: Focus and shutter
Focal Range: close up to 2 m or 1 m to infinity
Access: 5 V DC, 300 mA
Connection: 500 mm cable with free cable ends
Motor for Focus/Shutter: Faulhaber geared motor type 1016
M 012 G 10 / 1K 256 : 1
Encoder for Focus /Shutter: Farnell potentiometer 10 kOhm
type 32 82 569
Measuring lens MeVis C/MeVis Cm
Order-No Focal
length
(mm)
LINOS, USA
Phone +1 (508) 478-6200
E-mail info@linos.com
Objective
type
Aperture Max.
sensor
LINOS, UK
Phone +44 (0) 1908 262525
E-mail sales@linos.co.uk
Minimum
focus distance
(m)
Transmission
range (nm)
LINOS, France
Phone +33 (0)4 72 52 04 20
E-mail info-fr@linos.com
Camera
mount
Mounting
depth
(mm)
Focusing Iris
diaphragm
MeVis C
G038403000 12 MeVis C 1.8 2/3“ 0.03 450-900 C-Mount 3.5 manual, lockable
G038404000 16 MeVis C 1.6 2/3“ 0.22 450-900 C-Mount 3.5 manual, lockable
G038414000 16 MeVis Cm 1.6 2/3“ 0.22 450-900 C-Mount 3.5 -
G038405000 25 MeVis C 1.6 1“ 0.32 450-900 C-Mount 3.5 manual, lockable
G038415000 25 MeVis Cm 1.6 1“ 0.32 450-900 C-Mount 3.5 -
G038406000 35 MeVis C 1.6 1“ 0.45 450-900 C-Mount 3.5 manual, lockable
G038416000 35 MeVis Cm 1.6 1“ 0.45 450-900 C-Mount 3.5 -
G038407000 50 MeVis C 1.8 1“ 0.76 450-900 C-Mount 3.5 manual, lockable
G038417000 50 MeVis Cm 1.8 1“ 0.76 450-900 C-Mount 3.5 -
LINOS, Germany
Phone +49 (0)551 69 35-0
E-mail sales@linos.de

CCD-Camera Measuring lenses MeVis C
CCD-Camera Measuring lenses MeVis Cm
Focusing Iris
diaphragm
MeVis Cm
Iris range Filter
thread
MeVis C
Filter
thread
MeVis Cm
Length
MeVis C
(mm)
Length
MeVis Cm
(mm)
Diameter
MeVis C
(mm)
Diameter
MeVis Cm
(mm)
- 1.8-11 M35.5x0.5 - 63.9 - 42 - 240
- 1.6-16 M35.5x0.5 - 51.5 - 42 - 170
single, motorized 1.6-16 - M39x0.5 - 66.0 - 69 370
- 1.6-16 M35.5x0.5 - 44.1 - 42 - 156
single, motorized 1.6-16 - M39x0.5 - 66.0 - 69 356
- 1.6-16 M35.5x0.5 - 59.4 - 42 - 210
single, motorized 1.6-16 - M39x0.5 - 66.0 - 69 410
- 1.8-16 M35.5x0.5 - 67.5 - 42 - 240
single, motorized 1.8-16 - M39x0.5 - 66.0 - 69 440
page 113
Weight (g)
www.linos.com
Optical
Systems

page 114 Optical Systems
Measuring Telescopes
•
•
•
•
•
Improved apochromatic lens design
Telescopes with internal focusing lenses
Auxiliary lenses for shorter distances
ARB2 VIS broadband anti-reflection coating
Many versions of excellent Erfle eyepieces with different magnifications
and reticles
Measuring telescope without reversal system
Measuring telescope with 45° inclined tube
Measuring Telescopes
Order-No Measuring
Telescope
LINOS, USA
Phone +1 (508) 478-6200
E-mail info@linos.com
Minimum object
distance (without
eyepiece)
LINOS, UK
Phone +44 (0) 1908 262525
E-mail sales@linos.co.uk
ø of the
entrance pupil
D EP
Focal length f‘ e ∞
(at infinite object distance)
G450100000 without reversal system 1200 mm 30 mm 325.0 mm 2.82°
G450101000 with 45° inclined tube 1200 mm 30 mm 325.0 mm 2.82°
LINOS, France
Phone +33 (0)4 72 52 04 20
E-mail info-fr@linos.com
Field-of-view
angle 2w
LINOS, Germany
Phone +49 (0)551 69 35-0
E-mail sales@linos.de

Image reversal system
•
•
•
•
•
Designed for use with reading telescope
Provides upright, corrected images
Mounts onto telescope, replacing eyepiece tube
1.3x magnification
104-mm installed length
Image reversal system
Order-No Item title
G450102000 Image reversal system
Auxiliary close-up lenses, mounted
Auxiliary close-up lenses, mounted
Order-No Focusing range
G449010000 105-120mm
G449009000 120-135mm
G449008000 135-155mm
G449006000 165-200mm
G449004000 240-300mm
G449003000 300-400mm
G449002000 400-600mm
G449001000 600-1300mm
Mounting ring
•
•
Holds reading telescope
M6 , 3/8“ and 2 x M5 tapped holes for mounting on posts/
rods/base plates, etc.
Mounting ring
Order-No Item Title
G450901000 Mounting ring
page 115
www.linos.com
Optical
Systems

page 116 Optical Systems
Autocollimator AK 50
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
For noncontact determination of angular errors and tilt angles
High angular resolution
Calibrated spot size
Fixed focus
Adjustable eyepiece for personal focussing
usable with very small reflective surfaces (> 3 mm)
Complete with power supply with variable intensity control
Small
Lightweight
Angular resolution: 5´´
Spot size-ø: 0.100 mm = 100“
Field of view: 3°
Objective lens: computer-optimized achromat ø17mm clear
aperture
Eyepiece magnification: 20x
Light source: incandescent lamp (40 000 h typ. lifetime)
Connecting cable: 0.5 m long, with plug
Power supply: for 230 V~ / 115 V~ , 1,5-m line cord
Autocollimator AK 50
Order-No Voltage Reticle Grid/ring pattern
G450401000 230 V squared grids 10x10 grid, side length 0.1
mm
G450406000 115 V squared grids 10x10 grid, side length 0.1
mm
G450402000 230 V concentric rings 10 concentric rings, diameter
0.25 mm, 0.125 mm
increasing
G450407000 115 V concentric rings 10 concentric rings, diameter
0.25 mm, 0.125 mm
increasing
LINOS, USA
Phone +1 (508) 478-6200
E-mail info@linos.com
LINOS, UK
Phone +44 (0) 1908 262525
E-mail sales@linos.co.uk
LINOS, France
Phone +33 (0)4 72 52 04 20
E-mail info-fr@linos.com
LINOS, Germany
Phone +49 (0)551 69 35-0
E-mail sales@linos.de

page 117
www.linos.com
Optical
Systems

page 118 Optical Systems
LINOS, USA
Phone +1 (508) 478-6200
E-mail info@linos.com
LINOS, UK
Phone +44 (0) 1908 262525
E-mail sales@linos.co.uk
LINOS, France
Phone +33 (0)4 72 52 04 20
E-mail info-fr@linos.com
LINOS, Germany
Phone +49 (0)551 69 35-0
E-mail sales@linos.de