Data structure for the ICOM IC-R2 Scanner - OoCities

$E5 Termination code.Send to radio at endof cloning memorywrite operation$E6 Termination Result.Sent by radio at endof cloning memorywrite operation$FE $FE $EE $EF $E5 $FDThe data in this command decodes to 'Icom Inc.'This command must be sent or the cloningoperation will terminate with an error.$FE $FE $EF $EE $E6 $00 $FDThis is an acknowledgement from the radio givingthe termination status of the cloning operation.$00 : Completed with no errors$01 : Completed with errorsIf the operation was unsuccessful, the radio willdisplay CL Err on its LCD, and will have to bepowered off to recover. On restart it reinitialises in aminimal default configuration.Transferring Data.The cloning process transfers data directly to the memory of the radio. The datatransfer command provides details of the memory locations and data to betransferred.The command that transfers data to or from a radio has a simple structure. Thedata is transferred using a series of commands, each with the same basic layout.Commandsequence toload data fromthe computerinto radiomemoryDatacommand preamble$FE $FEcode to communicate $EE $EFfrom PC to radiocommand code for $E4data transferStarting Memory AddressNumber of bytes of data to beloadedData to be loaded2 ASCII representedhexadecimal numbers(4 characters)1 ASCII representedhexadecimal number(2 charactersASCII representedhexadecimal numbers.(2 characters pernumber)14