SASY 60i Busbar System

More documents

Recommendations

Info

SASY 60i Busbar SystemNZM Busbar Adaptor, 3-pole 1) , for Copper Bars 12 - 30 x 5/10, Double-T-ProfileVT16206Busbar Adaptor NZM• NZM1-XAD160:For switches with standard connection frame-typeterminals. To be snapped onto the busbar by meansof a combi-base.Adaptor Length 200 mmSpecial Features: for connecting to the system at thetop through fixed connection bars included in thescope of delivery 2)• NZM2-XAD250:Use only in combinatiion with the auxiliary type(+)NZM2-XKR4. To be screwed onto the busbar bymeans of a claw-type of clamp.Adaptor Length 190 mmSpecial Features: For connecting to the system at thetop/bottom through a tubetype of connection at therear. Tube included in the scope of delivery.• NZM3-XAD550:Use only in combination with the a uxiliary type(+)NZM3-XKR13. To be screwed onto the busbar bymeans of a claw-type of clamp.Adaptor Length 270 mmSpecial Features: For connecting to the system at thetop through a tube-type connection at the rear. Tubeincluded in the scope of delivery.• Rated Operating Voltage 690 VVT17706Max. Adaptor Utilisation Designation Article No. UnitsRated Width per PackageOper. Current x LengthI e [A][mm]160 90 x 200 NZM1 NZM1-XAD160 104554 1PMC1PSC1PN1N1NS1VT17606250 106 x 190 NZM2 NZM2-XAD250 104555 1PMC2PSC2PN2N2NS2550 140 x 270 NZM3 NZM3-XAD550 104556 1PMC3PSC3PN3N3Terminal Space Cover NZM• NZM2-XKR4:For device combination NZM2 use with theauxiliary type +NZM2-XKR4O or +NZM2-XKR4USpecial Features: to cover the connection to thesystem at the top/bottom• NZM3-XKR13:For device combination NZM3 use with the auxiliarytype NZM3-XKR13OSpecial Features: to cover the connection to thesystem at the top• Rated Operating Voltage 690 VMax. Adaptor Utilisation Designation Article No. UnitsRated Width per PackageOper. CurrentI e [A][mm]VT18706250 – NZM2 NZM2-XKR4 281666 1PMC2PSC2PN2N2NS2550 – NZM3 NZM3-XKR13 281668 1PMC3PSC3PN3NTechnical data page 281) To be snapped onto the voltage-free busbar.2) Thanks to the combi-base it can be adjusted to a bar width of both 5 and 10 mm, cross-section of conductor 6 x 9 x 0.8.17
SASY 60i Busbar SystemxStart Busbar System, 3-pole 1)VT15906VT14306xStart Busbar Adaptor• BBA0-25: Direct starter set PKZM0-XDM12• BBA0R-25: Reversing starter set PKZM0-XRM12• BBA0-32: Electrical contact module PKZM0-XM32 DE• BBA0R-32:Electrical contact module PKZM0-XM32 DEReverse wiring set DILM32-XRL• BBA2L-63:Electrical connector forPKZ2 + DILM7…12: MVS-LB0-00M-GPKZ2+DILM17…32: MVS-LB0-0M-G• BBA4L-63:Electrical connector forPKZM4+DILM17…32: MVS-LB0-0M-GPKZM4+DILM40…65: PKZM4-XM65 DE• Rated Operating Voltage: 690 V• Wire Cross Section: AWG8(AWG10 for BBAO-32, BBAOR-32,AWG12 for BBAO-25, BBAOR-25)• Adaptor Lenght 200 mm(260 mm for BBA2L-63, BBA4L-63)Max. Adaptor Support Utilisation Designation Article No. UnitsRated Opera- Width Rails per Packageting CurrentI e [A] [mm]VT15706VT14906VT16406VT1660625 45 1 PKZM0+ BBA0-25 101451 1/4Contactor DIL M 7Contactor DIL M 9Contactor DIL M 12Contactor DIL M 15MSC-D-0,25-M7…to MSC-D-16-M15…25 90 1 PKZM0+ BBA0R-25 101453 1/22x Contactor DIL M 7-012x Contactor DIL M 9-012x Contactor DIL M 12-01MSC-R-0,25-M7...to MSC-R-12-M12…32 45 2 PKZM0+ BBA0-32 101452 1/4Contactor DIL M 17Contactor DIL M 25Contactor DIL M 32MSC-D-16-M17...to MSC-D-32-M32…32 90 3 PKZM0+ BBA0R-32 101454 1/22x Contactor DIL M 17-012x Contactor DIL M 25-012x Contactor DIL M 32-01MSC-R-16-M17...to MSC-R-32-M32…63 72 2 PKZ2+ BBA2L-63 101480 1/2Contactor DIL M 7Contactor DIL M 9Contactor DIL M 12Contactor DIL M 17Contactor DIL M 25Contactor DIL M 32Contactor DIL M 4063 72 1 PKZ2 BBA2-63 101458 1/463 55 2 PKZM4+ BBA4L-63 101459 1/4Contactor DIL M 17Contactor DIL M 25Contactor DIL M 32Contactor DIL M 40Contactor DIL M 50Contactor DIL M 6063 55 1 PKZM4 BBA4-63 101457 1/4Side Module• Can be placed on both sides of BBA, to increase theadd-on width• Adaptor Lenght 200 mmMax. Adaptor Support Designation Article No. UnitsRated Opera- Width Rails per Packageting CurrentI e [A] [mm]– 9 – BBA-XSM 101484 1/10Technical data page 281) Can be used with all busbars in a 60 mm system. Thanks to the combi-base it is suitable for both 5 mm and 10 mmthickness of the bar as well as for double-T-profile bars.To be snapped onto the voltage-free busbar.18
Page 1 and 2: SASY 60iEnclosures and distribution
Page 3 and 4: End cover for busbarsupportDouble T
Page 5 and 6: SASY 60i Busbar System4
Page 8 and 9: SASY 60i Busbar SystemBusbar Covers
Page 10 and 11: SASY 60i Busbar SystemCovers for 63
Page 12 and 13: SASY 60i Busbar SystemTerminals for
Page 14 and 15: SASY 60i Busbar SystemTerminals for
Page 16 and 17: SASY 60i Busbar SystemUp to 1000 A
Page 20 and 21: SASY 60i Busbar SystemxStart Busbar
Page 22 and 23: Technical Data21
Page 24 and 25: SASY 60i Busbar SystemShort-circuit
Page 26 and 27: SASY 60i Busbar SystemTechnical Dat
Page 28 and 29: SASY 60i Busbar SystemTechnical Dat
Page 31 and 32: SASY 60i Busbar SystemDimensionsBBS
Page 33 and 34: SASY 60i Busbar SystemDimensionsBBC
Page 35 and 36: SASY 60i Busbar SystemDimensionsAKU
Page 37 and 38: SASY 60i Busbar SystemDimensionsNZM
Page 39 and 40: SASY 60i Busbar SystemUL/CSA Approv
Page 41 and 42: SASY 60i Busbar System40

SASY 60i Busbar System

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?