Digest Eng 07-D1 - korloy

KORLOY Chip-BreakersShape Application Range Special Feature“B”Series “G”Series“H”SeriesHAHSGMGRGHGSB20For Light-alloy, Stainless-steel machining.Sharp cutting edge generate low cutting force.Specially designed tough main cutting edge.Suitable for cutting of low carbon steel, stainless steel,aluminum.Recommended Cutting Conditionsd = 0.8 ~ 3.5mmf = 0.1 ~ 0.4mm/rev0.03 ~ 0.16inch 0.004 ~ 0.016iprFor Medium cutting of Stainless-steelExclusive design for stainless steel cutting provide longer tool lifeWear resistance have been reinforced through high rake angle ofchip breaker land.Recommended Cutting Conditionsd = 1.0 ~ 4.0mmf = 0.1 ~ 0.4mm/rev0.04 ~ 0.16 inch 0.004 ~ 0.016iprFor Medium to Light cuttingExcellent chip control at general cutting conditions.Strong cutting edge strength provide good performance atintermittent and fast feed cutting.Recommended Cutting Conditionsd = 0.7 ~ 4.0mmf = 0.1 ~ 0.5mm/rev0.03 ~ 0.16inch 0.004 ~ 0.02iprFor Medium to RoughingSuitable for deep depth of cut and fast feed cutting of steel andcast iron.Suitable for intermittent cutting.Recommended Cutting Conditionsd = 3.0 ~ 8.0mmf = 0.3 ~ 0.8mm/rev0.12 ~ 0.32inch 0.012 ~ 0.032iprFor Heavy duty cuttingSuitable for heavy duty cutting due to strong cutting edge.Wide chip control range with low cutting forceRecommended Cutting Conditionsd = 3.0 ~ 11.0mm f = 0.3 ~ 1.3mm/rev0.12 ~ 0.44inch 0.012 ~ 0.047iprFor Medium to Roughing of Stainless-steelExclusive chip breaker for stainless steel.Recommended Cutting Conditionsd = 1.5 ~ 5.5mmf = 0.15 ~ 0.5mm/rev0.06 ~ 0.22inch 0.006 ~ 0.020iprFor Light to Medium cuttingExclusive chip breaker for cutting of cast iron.Recommended Cutting Conditionsd = 1.5 ~ 4.0mmf = 0.15 ~ 0.5mm/rev0.06 ~ 0.16inch 0.006 ~ 0.020ipr13