Click here - Primus Electronics Corporation

Fall ProtectionPulleysSuretyMan TM PulleySingle, 4" (10 cm), Std/Prusik, Aluminum, Yellow.For 3/8" to 1/2" statickernmantle rope.Mfr Part #MSA SPPPU8710Pro Traxion ProgressCapture PulleyCan be used as pulley orrope clamp. Largediameter aluminumsheave mounted onsealed ball bearings. Lockablemoving side plate.For ropes ≤ 13 mm.Mfr Part #Petzl P51Micro Traxion CompactProgress Capture PulleyCan be used as progresscapture pulley or simplepulley. Aluminum sheavemounted on sealed ballbearings.For ropes ≤ 11 mm.Mfr Part #Petzl P53Mobile Versatile Ultra-Compact Single PulleyFor hauling systemsand deviations. Sheavemounted on self-lubricatingbushings.For ropes ≤ 13 mm.Mfr Part #Petzl P03AFixe Versatile CompactSingle PulleyFor hauling systems anddeviations. Fixed sideplates. Sheave mountedon self-lubricatingbushings.For ropes ≤ 13 mm.Mfr Part #Petzl P05WRescue High Strength,High Efficiency PulleyFor rescue professionals,heavy loads/intensive use.Large diameter sheavemounted on sealed ballbearings. Accepts up to 3carabiners. For ropes ≤ 13mm.Mfr Part #Petzl P50AMini Lightweight PrusikPulleySpecial side plates designedfor use with aPrusik friction hitch inlightweight progresscapture systems. Sheavemounted on sealed ballbearings.For ropes ≤ 11 mm.Mfr Part #Petzl P59AGemini LightweightDouble Prusik PulleySpecial side plates asseen in P59A. Parallelmounted sheaves & auxiliaryattachment point.Sheaves mounted onsealed ball bearings. Forropes ≤ 11 mm.Mfr Part #Petzl P66AMinder Highly EfficientPrusik PulleySpecial side plates asseen in P59A. Large diametersheave mountedon sealed ball bearings.Accepts up to 3 carabinersto facilitate use. For ropes≤ 13 mm.Mfr Part #Petzl P60ATwin Highly EfficientDouble Prusik PulleySpecial side plates as seenin P59A. Parallel mountedsheaves & auxiliary attachmentpoint. Large diametersheaves mountedon sealed ball bearings.Accepts up to 3 carabiners.For ropes ≤ 13 mm.Mfr Part #Petzl P65ATandem Double Pulley Tandem Speed Doublefor Tyrolean Traverses on Pulley for TyroleanRopeTraverses on RopeAluminum sheaves Stainless steel sheaves.mounted on self-lubricating Sheave mounted onbushings. Accepts up to 3 sealed ball bearings. Acceptsup to 3 carabiners.carabiners.Mfr Part #Petzl P21Mfr Part #Petzl P21 SPESMC Advance Tech HXPulleyMade from high qualityaluminum. Anodized tohelp prevent corrosion.Supports rope diametersfrom 7 mm up to 12.5mm. Stainless steel pinsretain the rope whena rigged system is prepacked.Mfr Part #PMI SM154900NCertified NFPA 1983, TSMC Advance Tech MateMade from high qualityaluminum. Anodized tohelp prevent corrosion.Supports rope diametersSMC 3" Prusik MindingPulleyBall bearing. Large tophole accepts 3 largecarabiners. Aluminumfrom 7 mm up to 12.5 mm. side plates and sheaves.Stainless steel retainingpins. NFPA 1983 (2012 EdSealed bearings. For 11mm to 13 mm rope.Pending) “T” Technical Use.Mfr Part #PMI SM158000NMfr Part #Certified NFPA 1983 GPMI SM154801NCertified NFPA 198340(800) 435-1636 tel | (800) 767-7605 fax | www.primuselectronics.com