PUBLIC AUCTION - Maynards Industries

Upon Instructions from the Court Appointed ReceiverPLASTICS MANUFACTURING FACILITYPUBLIC AUCTIONTHURS, SEPT 3 RD 2009 @ 10 AM EDTPreview & Inspection: Wednesday, September 2 from 9am-4pm or by appointment42050 EXECUTIVE DRIVE, HARRISON TOWNSHIP, MIInternetBidding AvailableREGISTER ATmaynards.com2006DEMAG TITAN 1500/1550-13600 INJECTION MOLDER(12) Cincinnati, UBE, Demag & HPM Injection Molders up to 3000 Ton as new as 2006• Material Dryers • Granulators • Air Compressors • Mobile Equipment• Inspection EQUIPMENT and MoreIndustries (1991) Inc.Auctions • Liquidations • Appraisals21700 Northwestern Hwy.Suite 1180Southfield MI 48075www.maynards.comTel: (248) 569-9781Fax: (248) 569-9793Visit UsOn TheInternet!www.maynards.com• Industrial Auctions & Liquidations• Consumer Product Liquidations• Fine Art & Antiques Auctions• Appraisals • Contact Information & More

UBE ST2500US-360 Injection Molder CINCINNATI VL3000-540 Injection Molder HPM 1500 MKII WP400 Injection Molder2 AVAILABLEUBE ST1500USW-300 Injection Molder UBE ST2000US-360 Injection Molder UBE PZ7200UST-SA Injection MolderCINCINNATI V5500-68 Vista Injection Molder UBE ST2000US-300 Injection Molder READ 12’ Silos8 AVAILABLEINJECTION MOLDING MACHINES• DeMag Titan Model 1500/1550-13600, 1,500 Ton x 186-Oz. Dual Platen Hydraulic Plastic Injection Molding Machines,s/n 51680600 (New 2006), 110mm Screw Dia.,83.9”x74” Platen, 61”x50.4” Tie Bar Spacing, 180.7”Daylight Opening, 25.2” Min. Mold Thickness, 60.6” Max.Mold Thickness, 13.8” Ejector Stroke, AEC/Sytrama AEV-201-F3SL Pick & Place Robot, s/n 36E1431 (Subject toPrior Sale and Approval by Owner)• CINCINNATI MILACRON Model VL3000-540, 3000-Tonx 540-Oz. Full Hydraulic Plastic Injection Molding Machine,s/n 3926A01/90-2 (New 1990), 6.299” Dia. Screw,118.11”x104-3/4” Platen, 84”x67” Distance Between TieBars, 21.85” Min. Mold Thickness, Hydraulic, CincinnatiMilacron Model Camac TXTL Control System With CRT,with Conair/Sepro Model PIP500AZ, 5-Axis Pick and PlaceRobot, s/n 2088 (New 1994), Conair/Sepro Model P900Control System• UBE UBEMAX-ST Series Type ST2500US-360, 2500-Tonx 360-Oz. Toggle Type Plastic Injection Molding Machine,s/n 602 (New 1995), 132mm Dia. Screw, 102.36”x86.93”Platen, 70.86”x66.93” Tie Bar Spacing, 141.73” Daylight,Hydraulic Ejection, UBE Model Humma Control With LCDDisplay, with Conair/Sepro Model PIP500AZ 5-Axis Pickand Place Robot, s/n 2597, Conair/Sepro Model P900 RobotControl System• UBE UBEMAX-ST Series Type ST200US-300, 2000-Ton264-Oz. Toggle Type Plastic Injection Molding Machine,s/n 568 (New 1993), 120mm Dia. Screw, 102.36”x86.93”Platen, 66.93”x70.86” Tie Bar Spacing, 141.73” Daylight,Hydraulic Ejection, UBE Model Humma Control WithDisplay, Burr Brown TM2500 Control, with Husky ModelMTE35, 3-Axis Pick and Place Robot, s/n 2558719 (New2002)• UBE UBEMAX-ST Series Type ST2000US-360,2000-Ton x 360-Oz. Toggle Type Plastic InjectionMolding Machine, s/n 26935 (New 1995),132mm Dia. Screw, 90-1/2”x102.36” Platen,63”x71-1/2” Tie Bar Spacing, 141.73” Daylight,Hydraulic Ejection, UBE Model HummaControl With LCD Display, with Conair/SeproModel PIP500, AZ 5-Axis Pick and Place Robot,s/n 2089 (New 1994), Conair/Sepro ModelS900 Control System• UBE-MAX Model ST1500USW-300, 1500-TonU.S.W. “ST Series” Computerized EnclosedBase 1500-Ton x 300-Oz. Horiz. Rotary ScrewPlastic Injection Molding Machine, s/n 722(New 1999), 120mm Dia. Screw, Toggle ClampAction, 30” Screw Stroke, Husky Model Powermotion/GEFanuc Computerized Pick & PlaceRobot, s/n 14789, w/F.S. Robot Control Panel• HPM MARK 1.SS#M1500SSWP400, 1500-Ton x 400-Oz. Hydraulic Screw Type PlasticInjection Molding Machine, s/n 78231, 6” Dia.Screw, 96-1/2”x77” Platen, 52”x72” Tie BarSpacing, 20” Min. Mold Thickness, HydraulicEjection, Breather Filter, AEC/Sytrama AEV-201-F3SL Pick and Place Robot, s/n 37A0818(New 2007)• HPM MARK 1500MKIIWP400, 1500-Ton x400-Oz. Hydraulic Screw Type Plastic InjectionMolding Machine, s/n 84217, 6” Dia. Screw,96-1/2”x77” Platen, 72”x52” Tie Bar Spacing,20” Min. Mold Thickness, Barber Colman“Optima AE” Computer Control with Starr AutomationTW-1700BM Pick and Place Robot, s/nT15-BC-0069• HPM Model M1000WPSS400, 1000-Ton x 400-Oz. Hydraulic Screw Type Plastic Injection MoldingMachine, s/n 76198, 6” Dia. Screw, 72-1/2”x62-1/2” Platen, 52”x42” Tie Bar Spacing, 12” Min.Mold Thickness, w/AEC Model INTII-1600, 5-AxisPick & Place Robot, s/n 96G9175 (New 1996)• CINCINNATI MILACRON Model 1000-Ton x 225-Oz. Hydraulic Plastic Injection Molding Machine,s/n 4010A07/80-1, 65”x65” Platen, 40”x40” TieBar Spacing, 10-3/4” Min. Shut Height• UBE UBEMAX-PZ Series Model PZ7200UST-SA,720-Ton x 92-Oz. Toggle Type Plastic InjectionMolding Machine, s/n 231-24812 (New 1992),54.72”x54.72” Platen, 37.40”x37.40” Tie BarSpacing, 78.44” Daylight, Hydraulic Ejection, UBEModel Humma Control With Display, Burr BrownTM2500 Control, with Sepro Multi-Axis Pick andPlace Robot, s/n 99-02N05579 (1999)• CINCINNATI MILACRON Model VH500-68 Vista,500-Ton x 68-Oz. Full Hydraulic Plastic InjectionMolding Machine, s/n 39-05A21/90-B (New 1990),90mm Dia. Screw, 48”x48” Platen, 34.3”x34.3”Tie Bar Spacing, 15” Min. Mold ThicknessGRANULATORS• NELMOR Model G16295M1, 16”x29” PlasticGranulator, s/n 78049935 (New 1978), Equippedw/(2) 20-HP Drives• AEC NELMOR Model G2045B, 20”x45”, 100-HPPlastic Granulator, s/n 98H01823 (New 1998),Equipped With Sound Enclosure• NELMOR Model G1220M1, 12”x20”, 25-HP PlasticGranulator, s/n 831220442 (New 1983)• Qty. of Nelmor portable granulators up to 20 HP

RESIN MATERIAL DRYING ANDCONVEYING SYSTEM• Consisting of: (5) Una-Dyne DHD-15 Hopper Dryers, (7) WhitlockNomad NMADPD-4AQ Material Dryers and IMCS 40CF Vertical MaterialBlenderCOOLING EQUIPMENT• (2) TRANE Series 2 Centravac Model RTHB180FLF00NWP000UNN-3LF2LFV0QU0, 180-Ton Water Chillers, s/n U99F08754 (New 1999)& s/n U99F08755 (New 1999), Equipped with AEC Model C3700D,10’x7’x7’ Carbon Steel Water Tank, s/n 99D0705 (New 1999), (3)40HP Pumps, (2) 20-HP Pumps• Water Chilling System Consisting of: (2) AEC 8’x8’x10’ Carbon SteelWater Tanks with Supply and Return Pumps, Controls• BALTIMORE AIRCOIL COMPANY Model 2426C, 500-Ton EvaporativeCooling Tower, s/n 84-5558D (New 1984)• BALTIMORE AIR COOL 3-Tower Evaporative Cooling System, Consistingof (2) Model 1-33400-2, 400-Ton Cooling Towers, s/n 996-06001(New 1999), Model 3644 Series 3000, 300-Ton Cooling Tower• (over 10) Portable Material Air Dryers and Hoppers including Whitlock,Conair Franklin, Husky, Ultra Air, etc.• (Over 25) AEC Single Zone Temperature Control UnitsTOOLROOM EQUIPMENT• NATIONAL Model RL251236E, 12”x48” C.C. Quick Change GearedHead Engine Lathe, 70-1500 RPM Spindle Speed, 6” Chuck, 2” HoleThru Spindle, s/n 9024 (New 1992)• LINCOLN 3-HP Variable Speed Vertical Milling Machine, 10”x50”Table, 60-4200 RPM Spindle Speeds, s/n 11-31• HARIG Model 612, 6”x12” Hand Feed Surface Grinder, s/n 19787• Maintenance Equipment Including: Miller Welders, Ridgid Pipe Threaders,Hose Crimpers, Double Pedestal Grinders, Horiz. Band Saw, etc.AIR COMPRESSORS• SULLAIR Model SL-25, 200-HP Rotary ScrewAir Compressor, s/n 003-131827 (New 2003)• LeROI 100-HP Rotary Screw Air CompressorWELDERS• (2) BRANSON Model 2000iw, 1200-Watt UltrasonicWelders, s/n WLA04038997 (New2004) and s/n WLA04038998 (New 2004)• MILLER Syncrowave 250, 250-Amp MigWelder, s/n KG040913 (New 1996)QUALITY CONTROL• MACBETH Spectralight Color Booth• JONES & LAMSON 14” Optical Comparator,Equipped With Medtronics Quadra-Chek 2000,2-Axis Digital Readout, s/n E-53353• ATLAS Model MF12 MEG Flow Tester, s/n12516• Lot Throughout Quality Control, Consistingof 4’x8’x8.5” Black Granite Surface Plate,3’x5’x6.5” Black Granite Surface Plate, DigitalHeight Gages, Gage Blocks, Gage Pins, Scales,etc.• WULFTEC Model WHP200 Semi-AutomaticRotary Stretch Wrapper, s/n 0396-1203 (New1996)• GREAT LAKES 4’x4’x5000 Lb. Floor Scale,Equipped with Digital Readout, s/n 031744• SPEED AIRE Model 3JR77, 7-HP Vertical TankMounted Air Compressor, s/n 9/19/97/03033(New 1997)OVENS• CEM Model MDS-81 System 300Microwave Ashing Drying Oven, s/nA1023-389• HOTPACK Model 213023 ElectricBench Top Lab Oven, s/n 68474MISCELLANEOUS• KARGO 60” Vertical Hydraulic CardboardBaler, s/n B-87827 (New1987)• (6) CONAIR/FRANKLIN VacuumConveying Pumps• DAYTON 5-HP Hydraulic Power Unit• (8) Read 12’ Dia. Bohed CorrugatedSteel Bulk Material Storage Silos• Lot Throughout Plant, Consistingof: Hydraulic Pallet Trucks, BandingOutfits, Hand Trucks, Snow Thrower,Hoppers, Golf Cart, Fire Extinguishers,Waste Baskets, Brooms,Brushes, Shovels, Shop Vacuums,Tables, Chair, Shop Office Furnitureand Equipment, Lunchroom Furnitureand Equipment, Work Benches,Foreman’s Desks, Supply Cabinets,Hand Tools, Ladders, Lockers, Fans,Saw Horse, Shelf Units, Forward2-Post Vibe Welders, Parts StakingPresses, Custom Designed AssemblyMachines, Smog Hogs, etc.2 AVAILABLEFORWARD TECH. WeldersLEROI 100hp Air Compressor CEM Phoenix Furnace NATIONAL Lathe ALLIS CHALMERS ForkliftKARGO Baler NELMOR G16295M1 Granulator NELMOR G1220M1 Granulator AEC Whitlock Dryer View of Temperature ControllersWULFTEC Stretch Wrapper TENNANT Scrubber J&L Optical Comparator LINCOLN Vertical Mill HARIG Surface Grinder DELTA Band Saw

PLASTICS MANUFACTURING FACILITYPUBLIC AUCTIONTHURS, SEPT 3 RD /09Maynards Industries250 H StreetPMB 207Blaine WA 9823010:00 AM EDTPreview & Inspection:Wednesday, Sept. 2 from 9am-4pm or by appointment42050 EXECUTIVE DRIVE,HARRISON TOWNSHIP, MI• (12) Cincinnati, UBE, Demag & HPM Injection Moldersup to 3000 Ton as new as 2006 • Material Dryers• Granulators • Air Compressors • Mobile Equipment• Inspection Equipment and MoreInternetBidding AvailableREGISTER ATmaynards.com42050 EXECUTIVE DR,HARRISON TOWNSHIP, MIH2006DEMAG TITAN 1500/1550-13600 INJECTION MOLDERTERMS & CONDITIONS:Payment: 25% NON-REFUNDABLE deposit on award of bid, balance within 48 hours. payment is cash, cashier’s CHECK, certified CHECK, wire transfer, company chECK onlyif accompanied by a letter from your bank guaranteeing amount of CHECK for deposit and/or payment in full. no personal CHECKS. full payment must be made beforeremoval of purchase. REMOVAL: LAST DAY OF REMOVAL IS FRIDAY, SEPTEMBER 18, 2009. and as further defined in the sale catalogue. everything is sold “as is, where is.” all salesfinal. cost and responsibility for removal of purchase remains with the purchaser. every effort will be maDe to facilitate removal. while quantities and descriptions arebelieved to be accurate, the auctioneer, owners or counsel make no warranties or guarantees either expressed or implied as to authenticity, genuineness of, or defectsin any lot and will not be held responsible for any advertising discrepancies or inaccuracies. no warranties whatsoever are made as to condition, merchantibility orfitness for use of any item. may we suggest you take full advantage of the preview and inspection period. sale subject to additions AND deletionsDRIVING DIRECTIONS FROM DETROITMETROPOLITAN WAYNE COUNTY AIRPORTHead southwest; Slight right at John D Dingell Dr;Slight right at William G Rogell Dr; Merge onto I-94E via the ramp to Detroit; Take exit 237 for N RiverRd toward Mt Clemens; Turn left at N River Rd (signsfor HARRISON TWP.); Turn left at Production Dr; Turnleft at Executive DrBUYERS PREMIUMS:13.5% ON-SITE, 16% ON-LINEIndustries (1991) Inc.Auctions • Liquidations • Appraisals21700 Northwestern Hwy.Suite 1180Southfield MI 48075www.maynards.comTel: (248) 569-9781Fax: (248) 569-9793Idle Assets?Maynards Specializes in Asset Conversion of Industrial Equipmentand Commercial Inventories. We offer:Cash • Guarantees • Commission • Confidential Appraisals5 Offices To Serve You www.maynards.com