Product Price List - Cash Acme

Frequently Asked Questionsand Answers to UsingSharkBite ® Fittings:Q:A:Q:A:Q:A:Q:A:Q:A:Q:A:Q:A:Q:A:Q:A:Can I use SharkBite for anything other than potable water?No, SharkBite fittings are certified for potable water use only.Are SharkBite fittings certified for hydronic heating applications?Yes, if the temperature does not exceed 200 F. NOTE: Glycol mixture forhydronics is acceptable up to and including 100%.Is a SharkBite fitting re-usable?Yes, following proper installation and disconnection instructions.Do you need the Demount (Disconnect) Clip to remove SharkBite fittings?Yes.What types of pipe material can SharkBite fittings be used with?SharkBite fittings are certified for use with copper, PEX, and CPVC only.SharkBite 2XLCan a SharkBite fitting be rotated on the pipe without damaging theintegrity of the joint?tubing. It is not required for copper or CPVC, however it is not necessary toPrices valid as of February 1, 2013Yes, the fitting can be rotated after assembly and will not affect theremove the tube liner from the fitting.integrity of the Given joint. the current volatility of the global commodity market, prices may change at short notice and to a significant degree.Q:Please check with the factory to confirm pricing. All prices subject toWhatchangeis thewithoutinsertionnotice.depthMinimumfor the SharkBitebilling $50.00fittings?NET.Are SharkBite fittings approved for underground use?A: Insertion depth will depend on the size of the fitting.SharkBite fittings have been certified for underground Reliance Worldwide applications Canada and as Inc. 1/4“ Pipe Insertion Depth = 3/4”a manufactured joint without access panels. NOTE: As with any plumbing74 Alex Avenue3/8” Pipe Insertion Depth = 3/4”project subject to inspection it is always important to reference your local1/2” Pipe Insertion Depth = 7/8”Vaughan, Ontario, L4L 5X1plumbing code.5/8” Pipe Insertion Depth = 1”1-888-820-01203/4” Pipe Insertion Depth = 1”What is the difference between Red, White, Blue, and Orange colored PEX1” Pipe Insertion Depth = 1-1/4”pipe?canadaorders@rwc.comRed, White, and Blue PEX pipe are exactly the cashacme.ca same, the different colors | sharkbite.com/can/Q: What is the insertion depth for the SharkBite 2XL fittings?allow you to identify individual lines such as hot and cold. All three colors A: Insertion depth will depend on the size of the fitting.are certified for potable water applications whilewww.rwc.cathe Orange tubing is an1-1/4” Pipe Insertion Depth = 2”oxygen barrier PEX pipe used for hydronic heating applications.1-1/2” Pipe Insertion Depth = 2-1/4”What are the maximum temperature and pressure ratings for SharkBitefittings?SharkBite fittings are certified to 200 PSI and 200 F (93 C).Q:A:Q:A:Q:A:Q:A:How well do SharkBite joints hold up to freezing temperatures?Copper water systems should not be allowed to freeze. When waterfreezes, it expands and creates pressure that exceeds plumbing systempressure capabilities * i.e. pipes and fittings burst!What should a user do if a SharkBite system leaks upon installation?In general, SharkBite fittings only leak due to one of three reasons;1. The pipe was not properly deburred prior to installation2. The tubing was not properly inserted3. The tubing was not squarely cutCan the tube liner be removed?Yes, the tube liner can be easily removed by pulling it past the O-ring, thenwith aid of the SharkBite disassembly clip or disconnect tongs (both soldseparately), the Tube Support Liner can drop out of the fittings as it canmove freely past the grab ring. Needle nosed pliers may be used to pullthe Tube Support Liner out. NOTE: Tube liner is necessary for use with PEX2” Pipe Insertion Depth = 2-1/2”Manufactured and Distributed byIs there a minimum order amount?Yes, the minimum order amount it $50.00.Reliance Worldwide Canada Inc.

SharkBite 2XLPrices valid as of February 1, 2013Given the current volatility of the global commodity market, prices may change at short notice and to a significant degree.Please check with the factory to confirm pricing. All prices subject to change without notice. Minimum billing $50.00 NET.Reliance Worldwide Canada Inc.74 Alex AvenueVaughan, Ontario, L4L 5X11-888-820-0120canadaorders@rwc.comcashacme.ca | sharkbite.com/can/www.rwc.caManufactured and Distributed byReliance Worldwide Canada Inc.