12.07.2015 Views

What is osmosis - Veneziani Yacht Paints

What is osmosis - Veneziani Yacht Paints

What is osmosis - Veneziani Yacht Paints

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

2 APPLICATIONFrequently asked questionsPROBLEMThe coating<strong>is</strong> not dryingThe coating<strong>is</strong> drying in spots▲▲?ANSWERThe components A+B have not been mixed,have not been mixed properly,the temperature <strong>is</strong> too low or the humidity too high.Poor mixing, temperature differences on the hull.The coatingremains plastic▲Low temperature, thinner added, wrong mixing ratio,Adherglass applied too early.The coating <strong>is</strong> sticky▲Low temperature, excessive humidity.The coating <strong>is</strong> delaminatingfrom the substrateIntercoat delamination▲▲Insufficient surface preparation,leftover contaminants, expired pot-life.Expired recoating interval,poor sanding or cleaning between coats.Bl<strong>is</strong>ters in thecoating system▲Excessive humidity in the GRP, premature immersion.ATTENTION!Do not apply the Aquastop system if the conditions do not comply with the following:• HULL: maximum allowed humidity content 10%• CLIMATIC CONDITIONS: minimum temperature 15°C, maximum temperature 35°C, relativehumidity below 70%.14

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!