Door closers Technical information - ASSA ABLOY

29 Door closersDC700G-FTTechnical attributesCam Motion guide rail systemTechnical attributesVariable adjustable closing force EN 3-6Door width up to850 mm - 1,200 mmFire and smoke protectionYesDoor swing directionsLeft / right handedStandard installation on hinge sideYesClosing speed Variable between 170°-0°Latching speed Variable between 15°-0°Backcheck Variable above 75°Opening angle hinge side ca. 170°Certified in compliance with EN 1154CE marking for building productsYesMounting plate dimensionssee dimensional drawingsDimensions of guide railsee dimensional drawingsEscape door strikeHolding force2000 NRated voltage12 V DC / 24 V DCRated current190 mA / 12 V; 95 mA / 24 VRated operational voltage tolerance +/- 10 %Operating temperature range -15 °C to +40 °CSwitching capacity - monitoring contact24V, 1 AArmature contact not potential-freeYesFree wheeling diodeYesCertified in compliance withEltVTRApproved system im compliance with EltVTREscape route controllerYou can finde thecomplete specificationon the internetat: (Link of your companieshomepage)Specifications for DC700G-FT Accessories: Colour:ASSA ABLOY door closer with Cam-Motion technology; 5 mm Spacer Plate Silver EV1extended mounting plate and integrated latch (narrow rebate)bolt lock, guide rail with integrated effeff escapeDCFA01door strike 332, 24V DC. End-to-end protective cover 15 mm Spacer Platefor door closers and guide rails; suitable for retrofitting(wide rebate) DCFA02to fire doors with guide rail door closers and for Replacement plate,fastening using drilling template acc. to EN 1154,5 mm, for DrillingSupplementary Sheet 1:2003-11;Template DCFA03· Closing force continuously adjustable, EN size 3-6 Replacement plate,· Door closer approved in line with EN 11544, with15 mm, for ExternalCE markDrilling Template· Escape door strike tested in compliance with theDCFA04German guideline for electrical locking systems for Mounting / replacementplate, 5 mm,doors along escape routes· Closing speed, latching speed and backcheck continuouslyadjustablefor Narrow FrameDCFA05· Suitable for fire and smoke protection doors· Recommended door width: at least 850 mm - max. Mounting / replacement1,200 mmplate, 15 mm,· Latch position continuously adjustable between 12 for Narrow Framemm and 17 mmDCFA06· Latch position adjustable horizontally between -3mm and +6 mm· Latch bolt lock can be adjusted vertically in 4 mmincrements (-4/ 0/ +4/ +8)· Escape door strike using FaFix®, adjustable by 2 mm· Suitable for left and right handed doors· Standard installation on hinge side