Door closers Technical information - ASSA ABLOY

31 Door closersDC700G-FTAccessoriesCam Motion guide rail systemNoticeThe positions of the locking components on the guiderail and mounting plate are designed in such a waythat escape door strikes and latch bolt are correctlyaligned when installed in a flush position (flush-fitteddoors).Adjustment option on electric strike (FaFix® ) of +/- 1mm and latch bolt lock of +6/-3 mm mean that smallerdifferences in measurements can be compensated for.In the case of doors with an overlapping door leaf(narrow or wide rebate), the following spacer platesmust be used to ensure that the guide rail and mountingplate are in a flush position when on top of oneanother.55200485685727111642653021Spacer Plate DCFA01For shimming guide railsover ASSA ABLOY drillingpattern. For use on narrow-rebatedoors with amax. door leaf overlap of8 mm.15164265153021200485685727Spacer Plate DCFA02For shimming guide railsover ASSA ABLOY drillingpattern. For use onwide-rebate doors with amax. door leaf overlap of18 mm.1151642655 21301172768548520030 30 30 30428,5428,5Replacement PlateDCFA03For mounting guide railover existing drill holesfrom other manufacturers,for flush-fit doorsand narrow rebate doorswith door leaf overlap upto 8 mm.1516426515 21301172768548520030 30 30 30428,5428,5Replacement PlateDCFA04For mounting guide railover existing drillingpattern by other manufacturers,for wide-rebatedoors with door leafoverlap up to 18 mm.