CellTap Wireless Telephone Tap Users Guide - JK Audio
CellTap Wireless Telephone Tap Users Guide - JK Audio
CellTap Wireless Telephone Tap Users Guide - JK Audio
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>JK</strong> <strong>Audio</strong><strong>Cell<strong>Tap</strong></strong><strong>Wireless</strong> <strong>Telephone</strong> <strong>Tap</strong><strong>Users</strong> <strong>Guide</strong><strong>Telephone</strong> Interface Products
ConnectionsConnect <strong>Cell<strong>Tap</strong></strong> between the 2.5 mm earpiecejack of your cell phone and your earpiece orheadset. Now connect a tape recorder or poweredspeakers to the 3.5 mm mini jack. This audiooutput contains a nice mix of both sides of theconversation.To recorder orpowered speakers
DescriptionGroup Listen - Simply connect a powered speakerto the audio output jack and you will have a newconferencing capability. Everyone in the room canhear your conversation, but only the personwearing the headset can talk to the distant party.While this is not a speakerphone, in many cases itis better.
Connections<strong>Cell<strong>Tap</strong></strong> must be used with an earpiece or headset.Your cell phone will not recognize <strong>Cell<strong>Tap</strong></strong> on itsown.Although <strong>Cell<strong>Tap</strong></strong> is designed to work with any cellor wireless phone that accepts a third partyearpiece or headset, there are no standards forthis connection and we cannot guarantycompatibility.Note: <strong>Wireless</strong> phones generate substantial radiofrequency (RF) noise during a call which caneasily leak into audio cables or equipment. Besure to keep the wireless phone one to two feetaway from any audio cables or equipment. It isalso important to keep the wireless adapter cordaway from any other audio cords.
Specifications<strong>Audio</strong>Output: Connector 3.5mm Mono JackOutput Impedance 600 ohmsLevel100 mV RMSIsolation1500 VRMSHeadsetJack: Connector 2.5mm Micro Jack<strong>Wireless</strong>PhoneJack: Connector ¼” - 3 conductor(36” cable provided - ¼”- 3conductor to 2.5 mm 3conductor)Passive, no AC or battery power needed.
WarrantyThe model Quick<strong>Tap</strong> is covered by a 2 yearwarranty to be free from defective workmanshipand materials. In the event that the Quick<strong>Tap</strong>needs repair, you must call us to get anauthorization, and then carefully pack and ship itto us. You will pay for shipping to us and we willpay for return back to you, UPS ground. No freerepairs will be made if the defect was caused bymisuse, weather conditions, or other cause,except for defective workmanship or materials.THERE ARE NO EXPRESS OR IMPLIEDWARRANTIES WHICH EXTEND BEYOND THEWARRANTY HERE MADE.<strong>JK</strong> <strong>Audio</strong> Inc.12/012701 N. 45th Road, Sandwich, IL 60548 (815) 786-2929www.jkaudio.com info@jkaudio.com
Change language