12.07.2015 Views

Skov sensors product survey

Skov sensors product survey

Skov sensors product survey

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Product <strong>survey</strong>Capacitive proximity <strong>sensors</strong>DOL 40R series – diameter 30 mm Type Delay Output Form Voltage No.10-30V AC/DC 100672Smooth90-230V AC 100671DOL 41R - Relay10-30V AC/DC 100772Thread90-230V AC 10077110-30V AC/DC 100662The DOL 40R capacitive sensor series isdesigned for general detection of feed,grain and solids.DOL 43RDOL 45Roffdelay0-4 hrsoff/ondelay0-4 hrsRelayRelaySmoothThreadSmoothThread90-230V AC 10066110-30V AC/DC 10076290-230V AC 10076110-30V AC/DC 10065290-230V AC 10065110-30V AC/DC 10075290-230V AC 100751DOL 41RATEXDOL 43RATEXDOL 45RATEX- Relay SmoothOffdelayOff/ondelayRelayRelaySmoothSmooth10-30V AC/DC 10062290-230V AC 10062110-30V AC/DC 10061290-230V AC 10061110-30V AC/DC 10060290-230V AC 100601The ATEX versions are certified for usein environments in Category 1, Zone 20,where there is danger of explosion.DOL 45R-Toff/ondelay0-4 hrsRelaySmooth10-30V AC/DC 10068290-230V AC 100681DOL 45R T-sensor is part of the DOL 40R series but is especially designedfor detection of feed and similar materials in pipe conveyor systems.MAKING SENSE IN YOUR PRODUCTION


DOL 25 series – 18 & 30 mm Type Delay Output Form Voltage No.DOL 25 is a new, complete <strong>sensors</strong>eries, which covers all requirementsconcerning physical, electric andfunctional qualities.The DOL 25 types with trimmers areavailable in several variants so you canget the exact function required:• Without trimmer (0T)• with one trimmer (1T)• with two trimmers (2T)All types offer a new, active temperaturecompensation, which makes them 100 %temperature stable.SCR NC P-M18 20-230 V AC 102139DOL 25 0T -P-M18 10-36 V DC 102099PNPNO & NC P-M18-PL 10-36 V DC 102147P-Ø18 10-36 V DC 102003SCR NOP-M18 20-230 V AC 102134P-M30 20-230 V AC 102230P-Ø18 20-230 V AC 102042SCR NCP-M30 20-230 V AC 102234DOL 25 1T -P-M18 10-36 V DC 102098PNP P-Ø18 10-36 V DC 102002NO & NCP-M30 10-36 V DC 102194P-M30-PL 10-36 V DC 102242P-Ø18 20-230 V AC 102041SCR NCP-M30 20-230 V AC 102233OffDOL 25 2TSCR NO0-10mP-M30 20-230 V AC 102229PNP P-M18 10-36 V DC 102097NO & NCP-Ø18 10-36 V DC 102001In addition to these standard types, DOL 25 is available in any combinationof form, function and output.www.dol-<strong>sensors</strong>.com


AccessoriesCapacitive proximity <strong>sensors</strong>DOL 40R Accessories Description No.Plastic screwed gland for mounting of <strong>sensors</strong> in the DOL 40 140107series.The plastic gland can be mounted in a silo wall by means of aninternal counter nut or directly from outside with the enclosedflange.Plastic gland like 140107, but to be used together with the DOL40R ATEX versions.140120The fitting permits easy fitting on plastic tubes in tubing systemswhere the sensor detects the material through the plastic wall ofthe tube.140112The sensor is typically applied to stop a filling when a system isfilled up. The fitting fits tubes in the diameter interval of 38 - 70mm.The adapter is a conic rubber sleeve, which can easily be placedon the DOL 40R sensor.140113The adapter is used where the DOL 40R is to replace a DOL16R/21R/33R mounted in a PG 36 or an equivalent unit with alarger diameter than the DOL 40R.DOL 25 AccessoriesGland for mounting of the DOL 25 sensor.For mounting of the gland a hole of minimum 28 mm and maximum 31mm is required.140121www.dol-<strong>sensors</strong>.com


Connection diagramsCapacitive proximity <strong>sensors</strong>DOL 40R relay outputDescriptionThe power supply is connected to the blue and brown wire.The load is connected in series with the relay contact of the sensor.STOP by activating the sensor, use the black wires 1 and 3 (NC).DOL 25 SCR thyristor outputSTART by activating the sensor, use the black wires 1 and 4 (NO).The load is connected in series with the SCR contact of the sensor.Max. load = 300 mADOL 25 PNP transistor outputThe load is connected to the NO or NC output on the sensor.Max. load = 500 mADOL 25 NPN transistor outputThe load is connected to the NO or NC output on the sensor.Max. load = 500 mAwww.dol-<strong>sensors</strong>.comSKOV A/SHEDELUND 4, GLYNGØREDK-7870 ROSLEVDENMARKTEL.: +45 72 17 55 55FAX: +45 72 17 59 59E-MAIL: <strong>sensors</strong>@skov.dkINTERNET: www.dol-<strong>sensors</strong>.com602851-20050927-Print: SKOV A/S

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!