section 7 & wirerope fittings rigging hardware - Bridon

SECTION 7RIGGING HARDWARE& WIREROPE FITTINGSREQUIRED TIGHTENING TORQUE & MINIMUM NUMBER OF FF-C-450 GRIPSTO ATTAIN 80% OF ROPE MINIMUM BREAKING LOADWire RopeDia. (in)Min No.of GripsTorque Value(Ft. Lbs.)5/16 2 303/8 2 451/2 3 655/8 3 953/4 4 1307/8 4 2251-0 5 2251-1/8 6 2251-1/4 7 3601-3/8 7 3601-1/2 8 3601-5/8 8 4301-3/4 8 5902-0 8 750WIRE ROPE GRIP GENERALLY TO DIN 1142 MAY ONLY BE USED WITH LIFTING TACKLE WHERE THESE ARE PRODUCEDFOR A SPECIAL APPLICATION AND ARE NOT RE-USED.WIRE ROPE GRIPS: DIMENSIONS & MASSES ARE SUBJECT TO COMMERCIALTOLERANCES AND DESIGN CHANGES WITHOUT NOTICE.ProductCodeRope Dia.(mm)Bow Dia.(mm)BowLength(mm)InsideWidth(mm)ThreadLength(mm)BaseLength(mm)BaseThickness(mm)BaseHeight(mm)A B C D F H I02100005 5 4 25 12 14 25 13 1302100006 6.5 5 32 14 17 30 16 1402100008 8 7 41 18 20 39 20 1802100010 10 7 46 20 24 40 20 2102100013 13 11 64 29 29 55 28 2902100016 16 12 76 34 35 64 32 3502100019 19 12 83 37 36 68 33 4002100022 22 14 96 41 40 74 34 4402100026 26 18 111 46 50 84 38 5102100030 30 18 127 54 55 95 41 5902100034 34 22 141 60 60 105 45 67REQUIRED TIGHTENING TORQUE & MINIMUM NUMBER OF DIN 1142 GRIPSTO ATTAIN 80% F ROPE MINIMUM BREAKING LOADWire RopeDia. (mm)Min No.of GripsTorque Value(N.m)5 3 2.06.5 3 3.58 4 6.010 4 9.013 4 33.016 4 49.019 5 68.022 5 10726 5 14730 6 21234 6 296check out our website: www.cookes.co.nz or email: salesadmin@cookes.co.nz