Continental L-Head Engines Overhaul Manual - Igor Chudov

CAMSHAFTS (Continued)F-6 SERIESPART NUMBERF601100307F601100501DESCRIPTIONSteel solid nose two (2) bolt thrust plate. Hyster lift truckswith an external governor is the most common application.C.I. Hollow two (2) bolt thrust plate. Catapillar and AllisChalmers lift trucks are the most common applications.F601100502 Steel hollow two (2) bolt thrust plate. See F601100306.Y-4 SERIESY400100246Y400100500Y400100501C.I. Solid nose two (2) bolt thrust plate. Generalapplications without pumps driven off the cam gear.C.I. Hollow two (2) bolt thrust plate. Clark lift trucks arethe most common application.Steel hollow nose two (2) bolt thrust plate. This wouldused on a Hyster as the solid nose camshaft has beendiscontinued. You must plug the cam nose with theN56100202 plug.Common parts for all camshafts;¯ X00506 Key¯ X18498 7/8" Nut (This is used on earlier camshafts.)¯ X18554 1" Nut (This is the nut used on all but the F140100400 camshaft listedabove. The F140100400 uses a X18242 nut which has limited availability.)¯ F400100246 2 Bolt thrust plate¯ D600100259 3 Bolt thrust plate¯ D600H00220 Cast Iron oil pump drive gear.¯ F600H00205 Steel oil pump drive gear.¯ X03203 Cam thrust plate bolt (for F400100246 cam thrust plate)¯ X00297A Washer for X03203Service and parts bulletinsreferences.numbered 72-209, 72-213 and 91-418 to be used as4