Wiha Product Catalogue 2008/2009 - KAVON CZ sro

Wiha TORX ® Ball end.Simpler, more powerful, safer.Plenty of room to manoeuvre:The ball end enables access to theTORX ® screw at an angle of up to 25°.Tight spaces that only allowscrewing in at an angle: In these"problem zones" for TORX ® screws,Wiha TORX ® ball end tools are indemand. The advantages for theuser are obvious: With the improvedgeometry of the ball end,TORX ® screws can now be screwedin and out even at angles up to25°. As a result, maximum torquesare no longer a problem even in difficultinstallation positions.Wearing of the tool and screw headis noticeably reduced.And Wiha is also pursuing a differentpath in production. Thanksto an innovative manufacturingprocess, cold forming, the TORX ®ball end gains a great deal ofstrength.So that these advantages benefit abroad range of applications, theWiha TORX ® ball end is integratedin several types of tools and isavailable in proven Wiha quality:• Wearing as an L-key in sizes T9 toT40, separately or as a set with aholder·• as a bit with the lengths 50, 70and 90 mm• as a screwdriver with theergonomic SoftFinish ® handle,through-hardened, brushedchrome-plated blade andprecision-fitting ChromTop ®blade tip.Thanks to their ruggedness, flexibilityand diversity, Wiha TORX ®ball end tools are indispensablefor any user who has to depend ona long tool life under difficultworking conditions.Wiha TORX ® ball end.• With optimised TORX ® ball endgeometry• Increased strength thanks tothe special cold forming on asystem developed by Wihaespecially for this purpose• Enables screwing in and outat angles of 25o• Simple insertion of the tool/bitand screwing in and out,especially in hard-to-reachlocations• Broad product range:As an L-key, as a bit and as aSoftFinish ® screwdriver127