Wiha Product Catalogue 2008/2009 - KAVON CZ sro

Torque TestersTechnical Data TorqueCheck TorqueCheck 2i TorqueCheck 10iFor connection to an Internal, Internal,Transducer external Wiha torque transducer with 1/4" hex drive with 1/4" hex driveMeasuring rangeDependent on which externalWiha torque transducer is used0,05 - 2 Nm 0,2 - 10 NmIndicationBi-directionalDisplayLCD display, 16-characterDisplay languagesGerman / English, alternativelyMeasurement methodsAuto - Peak Hold - TrackUnitsNm - Ncm - Nmm - in.oz - in.lb - ft.lbsLimit-value entryON / OFFAutom. power shutoffAfter 3 minutesMeasurement accuracy1% of displayed value, for the primary range (20-100% of full scale)Admissible overloadMax. 200% of end valueTemperature range 5 - 40°CPower supply3 batteries 1.5 V IEC LR 6 (AA), or 3 rechargeable batteries, 2300 mA/h (AA)Battery lifeApprox. 10 hours in operationDimensionsApprox. 180 x 120 x 70 mmWeightApprox. 1500 gExternal transducers for connection to the base deviceTechnical Data W5 W20 W50Measuring range 0,1 - 5 Nm 0,4 - 20 Nm 1 - 50 NmDimensionsWeightApprox. 50 x 50 x 62 mmApprox. 250 gPlease contact us for enquiriesor questions on calibration:Tel.: +49 (0) 7722 959-230Wiha Torque Testers.for e.g. testing a torque wrenchwith a needle indicator.Well thought-out features.In all three measurement methods,application-specific limit values(nominal value/tolerance) can beentered. If the limit-value functionis activated with "ON" and the desirednominal value/tolerance specificationsentered via the menu,a green LED indicates to the userwhether the measured values areOK. If the measured value fallsbelow or rises above the limit valuesduring measurement, the LEDflashes red. Measurements can beperformed in all common units.Either German or English can beselected as the display language.Quality in the detail.The measurement accuracy of thetorque testers and transducers is±1% of the display value over theprimary measuring range. Thisallows the best measurements tobe achieved. The supplied factorycalibration certificate is traceableto national standards.Mobile use.Power is supplied via disposableor rechargeable batteries. Thismakes the Wiha TorqueCheck devicesmobile and independent ofmains supplies. To facilitate simpletable mounting if necessary, thetesting devices are provided withthreads in the housing base andthe external Wiha transducers areprovided with mounting bore holesin the housing base.Extensive selection.The selection is rounded off byadapters which are available forall common torque tools as well asadapter blades which are designedfor the Wiha torque screwdriver /T-handle torque tools. Wiha offersthe user an extensive and powerfulselection of products which can beused to easily perform a large numberof torque tests and measurementtasks.• Simple and comfortableoperation• Mobile and mains independent• Robust housing, protectedwith a hinged cover• For testing and adjustingtorque screwdrivers andtorque wrenches/ clicktypewrenches• Bi-directional measurements(clockwise / counter-clockwise)possible• Three measurement methods:Auto - Peak Hold - Track• Optical "Good-Bad Display"of the limit values via LED• Two versions with internaltransducer, one base devicefor connection to externaltransducers• Delivered with factorycalibration certificate• Quality "Made in Germany",manufactured in accordancewith the most recent standardswww.wiha.com81