Wiha Product Catalogue 2008/2009 - KAVON CZ sro

Wiha Quality Assurrance.The Wiha quality assurance systemin accordance with ISO 9001:2000ensures that only first-class productsfrom the Wiha range of qualitypliers leave our factory.Continuously monitored productionprocesses and documentedorganisational procedures form thebasis for the excellent quality forwhich all previous Wiha productsare renowned.The manufacture of pliers that bearthe GS and VDE test symbol is alsomonitored by the Association ofGerman Electrotechnical Engineers(VDE).Wiha Article Number System.Basic article-numbering systemfor Wiha pliers range:Z 05 1 200 06All Wiha pliers are given an articlenumber.The product number is based ona nine digit number and has thefollowing form:Z = Pliers product group05 = Plier base model(e.g. 05 = snipe nose plier)1 = Style(e.g. angled 45°)200 = Length in mm06 = Implementation(e.g. VDE tested with2 component handle)The serial number consists of theletter Z, the basic model number,the shape number, as well as thekey for the design. In the aboveexample, the number is as follows:Z 05 1 06 and thus includesall VDE-tested, angled needle-nosepliers.Symbols.Details of cutting results of cutting pliers.Symbol Types of wire Example Tensile strength ca. N/mm 2Soft Wire Copper, aluminium 220 - 250Medium hard wire Iron nail 750 - 800Hard wire Spring wire, steel nail 1.600 - 1.800Piano wire Hardened spring steel 2.200 - 2.300Test wires standardised in DIN ISO 5744Dimensions.Maximum gripper width across flatsMaximum gripper pipe diameterOpening width, flatClamping rangeRetaining ring, externalRetaining ring, internalJaw style:Flat jawsHalf round jawsRound jawsCutter style:Cutter without bevelCutter with small bevelCutter with bevelCenter cutterScissors cutterAnvil cutterStripperwww.wiha.com215