colonne hplc brownlee e consumabili perkin elmer - Analytical ...

COLONNEHPLC BROWNLEEE CONSUMABILIPERKIN ELMER

CHROMATOGRAPHYPerkinElmer has been a leading provider ofChromatography solutions for over 50 years.Our team of dedicated ChromatographySpecialists has an expertise that boasts yearsof knowledge in understanding a laboratory’sproduct requirements. This knowledgeallows us to give you a focused consumablesportfolio to it your applications. Fromcolored inlet liners that help you easilyidentify the correct liner for your applicationto gas puriication systems that remove upto 99.99% of contaminants, our precisiondesigned,genuine tested and approvedconsumables will provide you with solid,reliable support, giving you all you need tosucceed. But our solutions don’t stop there.At PerkinElmer, we’re committed to providingyou with the best selection of solutions forall your Chromatography needs, regardlessof make, model or manufacturer. We haveinvested heavily in growing our portfolio,at your request, to bring you the bestperforming and productivity enhancingconsumables and accessories for all your gaschromatograph systems. Our consumablescan be depended upon to meet the mostdemanding performance and throughputneeds for today’s analytical, processmonitoring and quality control facilities.Liquid ChromatographyAccessories - LC/MS 74-79Accessories andAutosamplers - LC 80-82Bottle Kits 87, 112ChromatographyData Systems 83Columns 96-108Detector Lamps 116Fingertight Fittings,Nuts and Ferrules 111Flow Cells and PumpAccessory kits 115Generators 117Injection Valves andRotor Seals 114Micro-Vials 87Pump Accessory Kits 115Sample Loops and Tubing 110Sample Prep Solid PhaseExtraction (SPE) 88-91Solvent Filtrationand Mixers 113Syringe Filters andDisposable Syringes 87Vacuum Degassing Kits 112Vials, Caps and Septa 84-86Gas ChromatographyAir Compressors 156Capillary Columns 138-141Crimping Tools 135Ferrules and Injector Septa 124Filament 119Filters and Traps 125-129Flow Meters 131Gas Leak Detector 130Generators 152-155Liners 132-133Organic Standards 142-143Regulators 157SmartSource 122-123Swafer 120-121Syringes 134Thermal DesorberSupplies 149-151TurboMatrix HeadspaceSupplies 144Vials, Caps andSepta (GC) 136-137Vials, Caps and Septa(Headspace) 145-148www.perkinelmer.com/supplies77

FLEXAR SQ 300 MSVERIFY.QUANTIFY.SIMPLIFY.the Flexar SQ 300 mSIdeal for a variety of analyses, this single quadrupole detectorbrings the unsurpassed sample insight of mass spectrometry toliquid chromatography applications. The Flexar SQ 300 MS is anintegral part of the powerful and lexible Flexar LC product line. Itfeatures a revolutionary interchangeable probe and unique multistageion path for exceptional sensitivity.Measuring has never been easier with the Flexar SQ 300 MS. Itprovides the simplest route to exactly the information you need— quickly. As part of the Flexar LC platform, labs can expectexceptional chromatography coupled with an innovative ruggedsingle quadrapole mass spectrometer that offers:• Exceptional front-end chromatographic separation capabilities• Flexible, modular components to suit any LC/MS analytical need• he widest selection of operating pressures to addressthroughput needsThe Flexar SQ 300 MS has three ion source options that allow youto speciically address your analytical needs:• Ultraspray Electrospray Interface (ESI)• Dual-probe Ultraspray2 ESI• Atmospheric Pressure Chemical ionization (APCI)Powered by the PerkinElmer Chromera ® software, instrumentcontrol and data acquisition are faster and easier than ever.Flexar SQ 300 MSSpare Probe Assemblies / Dielectric CapillaryDescriptionESI Probe and Capillary Entrance Cone KitCapillary Entrance ConeESI ProbeDielectric CapillaryQuartz Tube for APCICorona Needle for APCIPart No.mZ300503mZ105094mZ109197mZ105057-60180mZ109004mZ301193Calibration solutions are required for instrument installation and for routine operations.Calibration SolutionsDescriptionCalibration Mix LC/MS (+) ION MixCalibration Mix LC/MS (-) ION MixTest KitsPart No.mZ301198mZ301199DescriptionFlexar SQ 300 MSPart No.N2910801DescriptionSQ300 Installation Performance Test KitPart No.mZ300061Flexar SQ 300 MS with Diverter ValveN2910800SQ300 Customer Performance Test KitmZ300085SQ300 ESI Positive and Negative Test KitmZ300096Spare Syringes and Needles (for Syringe Pump)DescriptionHamilton 500uL Gas Tight Syringe(No Needle)Part No.09220120Hamilton Replacement 6-pack of Needles 0922012278 Chromatography: LIQUID Chromatography

FLEXAR SQ 300 MS ACCESSORIESCustom BenchesDescription120V Bench with Ventilated, SoundDampened Pump Enclosure120V Bench with Monitor/Keyboard Arm, Side Shelfand Ventilated, Sound Dampened Pump Enclosure230V Bench with Ventilated, Sound DampenedPump Enclosure230V Bench with Monitor/Keyboard Arm, Side Shelfand Ventilated, Sound Dampened Pump EnclosureRoughing Pump Box with Acoustically InsulatedPump EnclosureUninterrupted Power Supply (UPS)Part No.N2911197N2911196N2911199N2911198N8141230N0777511Certiied LC Clean Easy-to-Order Convenience KitsSound Reducing Pump BoxThis pump is made from noise adsorbing material, which is oil andwater resistant.• Average 12 dB sound level decrease at 1.5 meters (by comparison:decreasing sound by 10 dB results in a 50% sound reduction).• Heat exchange is controlled by two internal silent fans guaranteeingeicient air circulation (about 200 m3/h).• No tools needed to access the pump compartment making routinemaintenance and oil change easy to be performed.DescriptionSound Reducing Pump BoxLCMS Filtration SystemHigh Capacity Hydrocarbon TrapPart No.MZ301123• Contains 750 cc of preconditionedactivated charcoal.• Stainless steel body. ¼” brass compressionittngs with ferrules for installation.• Maximum pressure 200 psi.• Recommended low rate up to 2 L per minute.• Will remove hydrocarbon impurities (50 ppm or less)from inert gases, nitrogen and hydrogen at room temperatureto low ppb range.• Capacity of 67 g of hydrocarbons C5 and heavier.• 10 µ stainless steel porous frits protect gas streamfrom particulates.• Individually helium leak tested. Shipped illed wth helium.Description Pkg Part No.Certiied LC Clean Non-slit Cap/VialConvenience Kit9 mm 2 mL Screw Top Clear Vial 1009 mm Blue Screw Top Cap with ClearNon-slit PTFE/Silicone (LC Clean)Certiied LC Clean Pre-slit Cap/ClearVial Convenience Kit9 mm 2 mL Screw Top Clear Vial with 9mm Gray Screw Top Cap9 mm Gray Screw Top Cap with ClearPre-slit PTFE/Silicone (LC Clean)Certiied LC Clean Non-slit CapAmberVial Convenience Kit1001001009 mm 2 mL Screw Top Amber Vial 1009 mm Blue Screw Top Cap with ClearNon-slit PTFE/Silicone (LC Clean)Certiied LC Clean Pre-Slit Cap/AmberVial Convenience Kit1009 mm 2 mL Screw Top Amber Vial 1009 mm Gray Screw Top Cap with ClearPre-slit PTFE/Silicone (LC Clean)LCMS Caps100N9300707N9300708N9300719N9300720Description Pkg Part No.9 mm Screw Cap Blue PTFE (Natural)/Silicone (White) Ultra-low Bleed, Non-slit9 mm Screw Cap Blue PTFE (Natural)/Silicone (White) Ultra-low Bleed, Non-slit9 mm Screw Cap Blue PTFE (Natural)/Silicone (white) Ultra-low Bleed, Slit9 mm Screw Cap Blue PTFE (Natural)/Silicone (white) Ultra-low Bleed, Slit100 N93063621,000 N9306363100 N93063641,000 N9306365DescriptionLCMS Filtration SystemPart No.N9301208www.perkinelmer.com/supplies79

FLEXAR UHPLCNEWPOWER ANDFLEXIBILITYIN UHPLCFX-15ULTRA HIGHPERFORMANCE LC18,000 PSIFX-10ULTRA HIGHPERFORMANCE LC10,000 PSILCCONVENTIONAL LC6,000 PSIPERFORMANCELCCONVENTIONAL LCMANUAL INJECTIONNEW FLEXAR UHPLC SYSTEM FROM PERKINELMERWith Flexar UHPLC, you’ll be able to transfer your existingmethods to achieve faster, more predictable results while reducingyour solvent consumption by up to 90%. The FX-15’s patented,dual reciprocating, 18,000 psi pump offers the widest operatingrange with exceptional compositional accuracy and retention timerepeatability. The value and performance of the FX-10 microbinarypump offers minimal disruption in your method developmentphase and analytical approach so you can easily port your existingmethods. And with the powerfully easy new Chromera ® software,instrument control is taken to a whole new level. Performance,lexibility and predictability — Flexar.Beneits of Flexar UHPLC• Improved separation eiciency• Up to 90% reduction in solvent consumption — saving you money• Up to 10x productivity gains — helping you do more in less timeFlexar UHPLC SystemsDescriptionFlexar FX-10 UHPLC PlatformFlexar FX-10 UHPLC PumpFlexar FX-10 UHP Pump Master“Flexar Bottle Manager, 3-channel VacuumDegassing” Tubing KitFlexar UHPLC SystemsDescriptionFlexar FX-15 UHPLC PlatformFlexar FX-15 UHPLC Pump“Flexar Bottle Manager, 3-channel VacuumDegassing” Tubing KitPRODUCTIVITYPart No.NFLR0210N2910640N2910641N2600581Part No.NFLR0215N2910531N260058180 CHROMATOGRAPHY: LIQUID CHROMATOGRAPHY

FLEXAR AccessoriesHigh Pressure Analytical Static MixersStatic Mixers are important in facilitating complete mobile phaseblending, resulting in improved retention performance. Thesemixers should be used as part of FX10, or FX15 LC systems, wherehigh pressure blending is required. Mixers incorporate a highlyeficient cross-low shearing mechanism which produces vortexsheer mixing over a wide range of volumes. They are now offeredin 18,000 psi pressure max lavor.A good irst choice selection is a volume of about half the low ratevolume. For example, when pumping at a 0.5 mL/min low rate, a350 μL mixer provides good mixing with very good baseline stability.DescriptionPart No.50 μL In-Line High Pressure Mixer Assembly, SS N2911200150 μL In-Line High Pressure Mixer Assembly, SS N2911201250 μL In-Line High Pressure Mixer Assembly, SS N2911202350 μL In-Line High Pressure Mixer Assembly, SS N2911205500 μL In-Line High Pressure Mixer Assembly, SS N2911203150 μL High Pressure Binary High Pressure Mixing-T, SS N291120610 μL Binary Mixing-T, SS N2911170Binary High Pressure T-Mixer, SS, 50 μLBinary High Pressure T-Mixer, SS, 350 μLBinary High Pressure T-Mixer, SS, 500 μLT-connector, SSSyringes and KitsN2911212N2911210N2911211N2911127PerkinElmer syringe kits for high pressure applications aremanufactured for precise liquid delivery. All of these glass syringescome with precision stainless steel plungers. They are used forsampling and lushing and are available in a large variety of sizes.SyringesDescriptionSample Needle w/FittingsAir Guide Needle (62 mm)Bio Compatible Sample Needle w/Tubing ConnectorNeedle (80 mm)Syringe KitsPart No.N2936009N2936000N2936010N2936342Dimension Buffer Tubing Part No.100 µL 200 µL N2936051250 µL 500 µL N2936052500 µL 1,000 µL N29360531,000 µL 2,000 µL N29360542,500 µL 2,000 µL N2936055FX-15 UHPLC Pump AccessoriesDescriptionReplacement 0.5 µm Filter Frits for FX-15 (4-pack)High Pressure FX-15 Piston Seal Kit(Need 4 per FX-15)Piston Wash Bottle KitPart No.N2911224N2911221N26016162,500 µL Sample Syringe Starting Kit N2930313FX-10 and FX-15 UHPLC System AccessoriesDescription color size Part No.ID PEEK Tubing0.004" Black 50 cm N29162000.005" Red 50 cm N29160560.004" Black 76 cm N29162600.005" Red 66 cm N2916262Connector Tubing, Stainless SteelFlexar ISO/Binary/Quaternary Pump to AutosamplerDual Mixer Connection (≤ 250 µL)Dual Mixer Connection (³350 µL)FX-10 Pump A (Upper) to T-mixerFX-10 Pump B (Lower) to T-mixerFX-10 Purge Valve to Filter/ ScavengerFX-10 Injector to ColumnFX-10 Pump A (Upper) to Dual MixersFX-10 Pump B (Lower) to Dual MixersFX-15 Pump to In-line MixerFX-15 Pump to Dual MixersFX-15 Injector to Column, StandardFX-15 Injector to Column, 33 cmN2916210N2916216N2916217N2916213N2916214N2916212N2916215N2916218N2916219N2916222N2916224N2916223N29162013 cm Scavenger Cartridge Holder 02580178Spheri5 Scavenger Columns (5-pack) 0258020230 mL Priming Syringe 09904849FX-15 C18 Scavenger Column KitN2910765FX-15 C18 Scavenger Columns (2/pkg) 02580223Microsyringes (For Manual Injection)Syringes are used for accurate and precise liquid delivery. Eachsyringe is hand-itted to assure maximum accuracy. Our syringesare composed of glass barrels and precision stainless steelneedles. The needle features a blunt tip, required for use with aRheodyne injector.DescriptionPart No.10 µL Syringe 0990493725 µL Syringe 0990482350 µL Syringe 09904941100 µL Syringe 09904822Rheodyne 22-gauge Blunt Needle with Luer Hub 09904943www.perkinelmer.com/supplies81

FLEXAR AutosamplersInject WIthGreater precIsIonFlexar AutosamplersBest-in-class cycle time. Wide injection volume range. Excellentinjection reproducibility. Precisely what you need to increase yoursample throughput and eficiency.Features and Beneits• Injects sample volumes as litle as 1 µL at pressures up to 18,000 psiwith the FX UHPLC Autosampler• Loads sample in only 8 seconds (in partial ill mode)• hree injection modes: full loop, partial ill and µL-pickup with nosample waste• Peltier cooling/heating mode option for operation at 4 °C to 40 °C.Will reach 4 °C ± 2 °C, achievable even at ambient temperatures upto 25 °C.All Flexar autosamplers can be upgraded in the ield for Peltiercooling and heating. All Flexar autosamplers include:• 100‐sample tray• Service Manager SW CD• 100 2 mL vials• User’s Manual• 100 2 mL screw top cap with • Nuts and ferrulescross slit vial septum• All fuses for 120–240 V• Tubing to connect to• All cables required for connectionwaste reservoirto a TotalChrom or Chromera• I/O cable (Pump Start/Ready‐In) Operating EnvironmentFlexar or Series 225/275Autosampler Trays and AccessoriesDescription25-Position 6 mL Vial Sample Tray80-Position 2 mL Vial plus (5) 6 mL Vial Tray(for derivatization)80-Position 2 mL Vial Tray with Dilution Tray96-well Microtiter Adapter96-well ‘Deep-well’ Microtiter Adapter96-well 7 mm Pre-slit Silicone Plate Mat/Seal96-well ‘Deep’ Microtiter Plate Adaptor(Supports Dual Microtiter Plates)96-well ‘Shallow’ Microtiter Plate Adaptor(Supports Dual Microtiter Plates)384-well Microtiter Adapter100-Position 2 mL Vial Sample Traypart no.N2936045N2936046N2930676N9302562N9302560N9302555N2936048N2936049N2936050N2936042(200) 0.2 mL Microvial plus (5) 2 mL Vial Tray N2936043250 µL Syringe Tip Replacements (10/pkg) N2936003Flexar/225 Biocompatible Upgrade Kit (w/valve)N29306751⁄16" OD x 0.038" ID Telon Tubing (AS Transfer Line) 02506495Flexar Autosamplers and Upgrade KitsDescriptionFlexar LC AutosamplerHigh throughput autosampler with exceptionally low carryover. Operates up to 6,100 psi (420 bar). Provides lexible injection modes: full-loop,partial-ill and µL-Pickup (no sample waste). Peltier cooling and heating options available as ield upgrades. Comes standard with 100 µL loop and250 µL sample lush syringe.Flexar Peltier LC AutosamplerHigh throughput autosampler with exceptionally low carryover. Operates up to 6,100 psi (420 bar). Provides lexible injection modes: full-loop,partial-ill and µL-Pickup (no sample waste). Built-in Peltier cooling comes standard. Peltier heating option available as ield upgrade. Comesstandard with 100 µL loop and 250 µL sample lush syringe.Flexar FX UHPLC AutosamplerHigh throughput UHPLC autosampler with exceptionally low carryover. Operates up to 18,000 psi (1,241 bar). Provides lexible injection modes:full-loop, partial-ill and µL-Pickup (no sample waste). Built-in Peltier cooling comes standard. Peltier heating option available as ield upgrade.Comes standard with 10 µL loop and 250 µL sample lush syringe.Field Upgrade Peltier KitsFlexar and Series 225 Upgrade Kit (from standard to Peltier Cooling option)Flexar and Series 225 Upgrade Kit (from standard to Peltier Cooling and Heating option)Flexar and Series 225 Upgrade Kit (from Peltier Cooling to Peltier Cooling and Heating option)part no.N2930660N2930661N2930664N2930672N2930673N293066982 Chromatography: LIQUID Chromatography

CHROMATOGRAPHY DATA SYSTEMCHROMERA ® CHROMATOGRAPHYDATA SYSTEMTHE POWERFULLY EASY CDSOne click and you’ll see: CDS doesn’t get any easier than Chromera. Combining intuitiveease of use with powerful functionality and conigurability, Chromera delivers the moststreamlined way to get from the analysis you need to the information your enterprisedemands. It’s powerfully easy.Information-rich Desktop offers instrument control at-a-glanceNEWFeatures and BeneitsPowerful• Instrument Control: NEW patented “Device Descriptors” controlinstruments. No channels limitation, trackable instrument status• Designed for UHPLC: interactive graphical methods optimizationenvironment with immediate feedback; ability to overlay pressureproile run ater run. Extend runtime of chromatogram in real time• Graphics: Multichannel graphics for multiple signal channelmonitoring (including system status channels to get ‘the pulseof the system’ real-time)• Feedback: Instrument-at-a-glance status panel provides real-timefeedback of complete LC system• Batch Sequencing: all the functions for setting up and reviewing asequence and results are within a single environmentEasy• Shallow footprint GUI: Most functions only one or two clicks away,using familiar Microsot Outlook user interface• Simple and obvious method editor: a single-point access toall instrument parameters, regardless of how complex theinstrument coniguration; Convenient tools for point-and-clickmethod optimization• Intuitive Sequence Wizard: Create complex sample tables easily;Convenient auto-ill and other editing functions; Decision Pointsfor real-time and post-processing data evaluation• Peak Integration Wizard: Makes integration process easy and straightforward• Report Wizard: allows creating numerous styles of reports andprintouts using the same toolwww.perkinelmer.com/supplies83

Flexar autosampler accessorieslc Vials, capsand septa KitsPerkinElmer Supplies – Tested and ApprovedWe have expanded our product selection to include additional vialtypes, new version caps and mating septa in a kit format for easiercustomer ordering. The following pages contain both currentand new product information. Tested to meet your applicationrequirements and guaranteed for it and compatibility.LC Vials, Caps and Septa KitsPerkinElmer offers a variety of vials, caps and septa to fulillyour application needs. Our screw thread vial caps use therevolutionary Inter-Seal ® . Using a process that bonds silicone/PTFE and other elastomeric compounds directly into thermoplasticclosures eliminates liner fallout, while still providing the excellentresealability and multiple injection capability. No adhesives areused in this process, bonding the cap and septa at the molecularlevel of plastic and rubber. These septa have a very broadchemical resistance and can be used in many markets including:environmental, diagnostic packaging, pharmaceutical packaging,cosmetic and food packaging.2.0 mL Glass Vials*description pkg. part no.2 mL 11 mm Clear Glass Crimp Vials 100 N93013852 mL 11 mm Clear Crimp Wide OpeningVials with Write-On Patch and Fill Lines100 N93062232 mL 11 mm Amber Glass Crimp Vials 100 N93026802 mL 11 mm Amber Crimp Wide OpeningVials with Write-On Patch and Fill Lines100 N93026792 mL 11 mm Clear Snap Top Vial 100 N93034182 mL 11 mm Clear Snap Wide OpeningVials with Write-On Patch and Fill Lines2 mL 11 mm Amber Snap Wide OpeningVials with Write-On Patch and Fill Lines100 N9306207100 N93062082 mL 8 mm Screw Top Clear Glass Vials 100 N93029452 mL 9 mm Clear Screw Top Vials 100 N93062012 mL 9 mm Screw Top Amber Vials 100 N93062202 mL 9 mm Clear Screw Top Vialwith Write-On Patch and Fill Lines2 mL 9 mm Screw Top Amber Vialswith Write-On Patch and Fill Lines2 mL 10 mm Clear Glass Screw Top Vialswith Write-On Label and Fill Lines2 mL 10 mm Amber Glass Screw Top Vialswith Write-On Label and Fill Lines100 N9307801100 N9307802100 N9306053100 N93060572.0 mL Caps and Septa*description pkg. part no.11 mm Snap Cap PolyethyleneCross-cut Slit (no Septum)11 mm Snap Cap PolyethyleneSingle Slit (no Septum)1,000 049785321,000 N93070238 mm Black Screw Caps (without septa) 100 N93034418 mm SEPTA-PTFE Red Rubber No CAP(for Cap N9303441)100 N93034428 mm Screw Cap PTFE/Silicone Septa 100 N93034499 mm PTFE/Silicone Screw Cap Blue 100 N930620210 mm PTFE/Red Rubber Screw Cap Black 100 N930620610 mm PTFE/Silicone Single SlitScrew Cap Black100 N930605210 mm PTFE/Silicone No Slit Screw Cap Black 100 N930620511 mm Crimp Green Aluminum Capw/Telon ® Rubber Septa11 mm Crimp Red Aluminum Capw/Telon ® Rubber Septa11 mm Crimp Blue Aluminum Capw/Telon ® Rubber Septa11 mm Crimp Silver Aluminum Capw/Telon ® Rubber Septa100 N9302684100 N9302685100 N9302686100 N930601511 mm Crimp Silver Red Rubber 100 N930623011 mm Crimp Silver PTFE/Silicone 100 N930622811 mm Crimp Silver PTFE/Silicone/PTFE 100 N9306229* Also see Convenience Kits for additional vials and caps, sold separately.0.2 mL Micro Vials, Caps and Septadescription pkg. part no.Caps/Septa8 mm Silver Aluminum Crimp CapPTFE/RubberPTFE/Pre-Slit White Silicone PolyethylenePress-On Cross-Slit Cap for 8 mm VialsCrimp top VialsGlass Microvials, Tapered, 0.2 mL,8 mm o.d. Top**autosampler Vial Sleeve12 x 32 Glass Vial Support Sleevefor 2 mL 8 mm Micro Vials (N9302136)micro Vial KitPolyethylene Includes 300 μL Tapered Vial,Blue Polypropylene Cap with BondedSilicone/PTFE Septa1,000 033008061,000 N9302141500 N930213625 N9307027500 N9306080** To be used with Glass Vial Support Sleeve (N9307027).84 Chromatography: LIQUID Chromatography

VIALS, CAPS, AND KITSUHPLC – General Starter KitDescriptionPart No.UHPLC – General Starter KitN2930801Contents Qty/Pack Part No.Open-End Wrench 2 09907233Adjustable Wrench 1 N9301326Reversible Screw Driver 1 N9301480Parker-Hanniin ZDV SS Union 1 09903289Parker-Hanniin Medium-Stem SS Nuts 10 099039801⁄16" Parker-Hanniin SS Ferrules 10 00873032Contents Qty/Pack Part No.50 cm x 0.007" ID 1 ⁄16" SS Tubing 2 008914805' x 0.007" ID 1 ⁄16" PEEK Tubing, Yellowish-Tan1 N93026505' x 0.005" ID 1 ⁄16" PEEK Tubing, Red 1 N291626230 mL Priming Syringe 1 099048492 mL clear write-on vials w/10 mm Pre-SlitPTFE/Silicone Caps; 100/pk1 N9300695Cable/Tubing Organizer Clip 3 NX5980061⁄16" Valco SS Ferrules 6 09903891Finger-Tight Fittings, PEEK, 5.5K psi Max.(5/pk)Optimize Technologies EZP (Hand-TightFitting to 13K psi, Wrench-tight to 20K psi)1 N93078221 N93063011⁄16" Tefzel Nuts 2 099203811⁄16" Tefzel Reverse Ferrules 2 099203821⁄8" Tefzel Nuts 4 N26011891⁄8" Tefzel Reverse Ferrules 4 09903771PEEK Tubing Cutter (Includes 5 Extra Blades) 1 N930782050 cm x 0.005" ID 1 ⁄16" SS Tubing 3 025070605' x 0.004" ID 1 ⁄16" PEEK Tubing, Black 1 N29162615' x 0.005" ID 1 ⁄16" PEEK Tubing, Red 1 N291626230 mL Priming Syringe 1 099048492 mL Clear Write-On Vials w/10 mm Pre-SlitPTFE/Silicone Caps; 100/pk1 N9300695Cable/Tubing Organizer Clip 3 NX598006HPLC – General Starter KitDescriptionHPLC – General Starter KitPart No.N2930802Contents Qty/Pack Part No.Open-End Wrench 2 09907233Adjustable Wrench 1 N9301326Reversible Screw Driver 1 N9301480Parker-Hanniin ZDV SS Union 1 09903289Parker-Hanniin Medium-Stem SS Nut 10 099039801⁄16" Parker-Hanniin SS Ferrule 10 008730321⁄16" Valco SS Ferrules 6 09903891Rheodyne SS Nut, Short Stem 2 09904956Rheodyne SS Nut, Long Stem 2 099049741⁄16" Rheodyne SS Ferrule 4 099049471⁄16" Tefzel Nuts 2 099203811⁄16" Tefzel Reverse Ferrules 2 099203821⁄8" Tefzel Nuts 4 N26011891⁄8" Tefzel Reverse Ferrules 4 09903771Finger-Tight Fittings, PEEK, 4K psi Max. 6 09920513PEEK Tubing Cutter (Includes 5 Extra Blades) 1 N930782050 cm x 0.005" ID 1 ⁄16" SS Tubing 1 02507060Autosampler Vial Glass InsertsDescription Pkg. Part No.Vial Glass Inserts:6 mm x 29 mm Clear Glass Insert, Rimless PulledPoint with Bottom Spring, 250 μL Usable Volume6 mm x 31 mm Clear Glass Flat Bottom Insert,400 μL Usable VolumeUse with:10 mm 2 mL Amber Screw Top Vialw/White “P” Icon w/Patch10 mm 2 mL Clear Screw Top Vialw/White “P” Icon w/Patch11 mm Clear Large Opening Snap Ring Vialw/Black “P” Icon11 mm Clear Large Opening Crimp Vialw/Black “P” Icon100 N9300703100 N9300704N9306057N9306053N9303418N93062319 mm 2 mL Amber Screw Top Vial w/Black “P” Icon N93062209 mm 2 mL Clear Screw Top Vial w/Black “P” Icon N93062015 mm x 29 mm Clear Glass Insert, Rimles PulledPoint with Bottom Spring, 150 μL Usable Volume5 mm x 31 mm Clear Glass Flat Bottom Insert,200 μL Usable Volume100 N9300705100 N9300706Use with:11 mm Standard Amber Crimp Vial w/Black “P” Icon N930268011 mm Standard Clear Crimp Vial w/Black “P” Icon N93013858 mm 2 mL Clear Screw Top Vial w/Black “P” Icon N93029456 mL Vials and Caps6 mL Glass Large-Volume Vials with20 mm o.d. TopPolyethylene Press-On Slit Caps/Septa or20 mm o.d. Top Vials125 N930213425 N2936083Micro Vial Kit and Polypropylene Vial/Cap KitsDescription Pkg. Part No.Polyethlene Micro Vial Kit – Pkg/500 Includes:300 uL Tapered Screw Top Vials (Pkg/500)Blue Polypropylene 9 mm Caps w/BondedSilicone/PTFE Septa (Pkg/500)1.5 mL Polypropylene Screw Top Amber VialWith Fill Lines, Telon ® /Silicone Septa andCap With Single Slit1.5 mL Polypropylene Screw Top Clear Vial WithFill Lines,Telon ® /Silicone Septa and CapWith Single Slit500 N9306080100 N9301735100 N9301736www.perkinelmer.com/supplies85

EASY-TO-ORDER CONVENIENCE KITSCertiied LC Clean Kits (Vials and Caps/Septa sold separately.)NEWDescription Pkg. Part No.Certiied LC Clean Non-Slit Cap/Vial Convenience Kit (Pkg. of 100)9 mm 2 mL Screw Top Clear Vial with 9 mm Blue Screw Top Cap Clear Non-Slit PTFE/Silicone (LC Clean )Certiied LC Clean Pre-Slit Cap/Vial Convenience Kit (Pkg. of 100)9 mm 2 mL Screw Top Clear Vial with 9 mm Gray Screw Top Cap Clear Pre-Slit PTFE/Silicone (LC Clean )NEW Certiied LC Clean Non-Slit Cap/Vial Convenience Kit (Pkg. of 100)9 mm 2 mL Screw Top Amber Vial with 9 mm Blue Screw Top Cap Clear Non-Slit PTFE/Silicone (LC Clean )NEW Certiied LC Clean Pre-Slit Cap/Vial Convenience Kit (Pkg. of 100)9 mm 2 mL Screw Top Amber Vial with 9 mm Gray Screw Top Cap Clear Pre-Slit PTFE/Silicone (LC Clean )Convenience Kits (Vials and Caps/Septa sold separately.)100 N9300707100 N9300708100 N9300719100 N9300720Description Pkg. Part No.9 mm Pre-Slit PTFE/Silicone Screw Cap Convenience Kit (Pkg. of 100) N93007019 mm Pre-Slit PTFE/Silicone Screw Cap Assembly (Pkg. of 100) 1 N93062039 mm 2 mL Clear Screw Vial Kit (Pkg. of 100) 1 N93062019 mm Red Rubber/Screw Cap Convenience Kit (Pkg. of 100) N93006999 mm Red Rubber/Screw Cap Assembly (Pkg. of 100) 1 N93062009 mm Clear 2 mL Vial Kit (Pkg. of 100) 1 N93062019 mm PTFE/Silicone Screw Cap Convenience Kit (Pkg. of 100) N93007009 mm PTFE/Silicone Screw Cap Assembly (Pkg. of 100) 1 N93062029 mm Clear 2 mL Vial Kit (Pkg. of 100) 1 N930620111 mm Pre-Slit PTFE/Silicone Snap Convenience Kit (Pkg. of 100) N930069711 mm Pre-Slit PTFE/Silicone Snap Cap Assembly (Pkg. of 100) 1 N930341611 mm 2 mL Clear Snap Vial Kit (Pkg. of 100) 1 N930341811 mm PTFE/Silicone/PTFE Snap Convenience Kit (Pkg. of 100) N930069811 mm PTFE/Silicone/PTFE Clear Snap Cap Assembly (Pkg. of 100) 1 N930341711 mm 2 mL Clear Snap Vial Kit (Pkg. of 100) 1 N930341810 mm Clear Pre-Slit PTFE/Silicone Screw Cap Convenience Kit (Pkg. of 100) N930069510 mm Pre-Slit PTFE/Silicone Screw Cap Assembly (Pkg. of 100) 1 N930605210 mm 2 mL Clear Screw Vials with Write-On Patch and Fill Lines (Pkg. of 100) 1 N930605310 mm Amber Pre-Slit PTFE/Silicone Screw Cap Convenience Kit (Pkg. of 100) N930069610 mm Pre-Slit PTFE/Silicone Screw Cap Assembly (Pkg. of 100) 1 N930605210 mm 2 mL Amber Screw Top Vials with Write-On Patch and Fill Lines (Pkg. of 100) 1 N930605711 mm PTFE/Silicone Snap Convenience Kit (Pkg. of 100) N930070211 mm PTFE/Silicone Snap Cap Assembly (Pkg. of 100) 1 N930341911 mm 2 mL Clear Snap Vial Kit (Pkg. of 100) 1 N930341811 mm Red Rubber Crimp Convenience Kit (Pkg. of 100) N930050211 mm Red Rubber/Silver Crimp Assembly (Pkg. of 100) 1 N930623011 mm 2 mL Clear Vial Kit (Pkg. of 100) 1 N930623111 mm Red Rubber Crimp Convenience Kit (Pkg. of 500) N930050311 mm Red Rubber/Silver Crimp Assembly (Pkg. of 100) 5 N930623011 mm 2 mL Clear Vial Kit (Pkg. of 100) 5 N930623111 mm PTFE/Silicone Crimp Convenience Kit (Pkg. of 100) N930050011 mm PTFE/Silicone Crimp Assembly (Pkg. of 100) 1 N930622811 mm 2 mL Clear Vial Kit (Pkg. of 100) 1 N930623111 mm PTFE/Silicone/PTFE Crimp Convenience Kit (Pkg. of 100) N930050111 mm PTFE/Silicone/PTFE Crimp Assembly (Pkg. of 100) 1 N930622911 mm 2 mL Clear Vial Kit (Pkg. of 100) 1 N930623186 CHROMATOGRAPHY: LIQUID CHROMATOGRAPHY

Brownlee SPP ColumnSInnoVATIonTo THe CoreSPP Particle Technology1.7 µm2.7 µmBrownlee Spp hpLC andUhpLC Column SolutionsSay goodbye to the limitations of traditional columns andexperience greater speed, lasting durability and better results fromyour Liquid Chromatography instrument.Brownlee Supericially Porous Particle (SPP) columns producesharper peaks and faster separation results. These results arepossible due to their breakthrough particle design and size.Brownlee SPP columns use 2.7 µm particles comprised of a thinouter shell of high-quality porous silica fused to a solid innercore. This advanced design allows for a shorter diffusion path,reducing the time solute molecules spend inside the particleswhile passing through the stationary phase.0.5 µmSmaller in size and innovative in design, superficially porous particles are madeby fusing a porous silica layer to a solid inner core.Brownlee SPP Phases and ApplicationsuHPlC Phases*PoreSize (Å)Coverage(µmol/m^2) pH rangeTemp limit(°C) Applications Chromatographic PropertiesC18 90 3.5 2 to 9 60 General Purpose Octadecyl phase for reversedphase separations.C8 90 3.7 2 to 9 60 General Purpose Octyl phase for reversedphase separations when less retention thana C18 is desired.HILIC** 90 N/A 2 to 8 60 General purpose bare silica column for normalphase and HILIC applications.Peptide ES-C18** 160 2.0 1 to 8 90 Sterically protected ligand (isobutyl - side chains),results in an extra stable bonded phase at low pHwhere most peptide separations are performed.PFP90 3.6 2 to 8 60 Highly retentive and selective for protonated basic(pentaluoro-phenylpropyl)analytes and molecules containing aromatic moities.PhenylHexyl 90 3.0 2 to 9 60 Alternative selectivity to alkyl bonded phases,recommended for aromatic groups. Compatiblewith highly aqueous mobile phases to facilitate theretention and separation of polar compounds.RP-Amide 90 3.0 2 to 9 60 Excellent phase for signiicantly increasing theretention and selectivity of acids, for symmetricalpeak shapes of bases, zwitterions and other polarcompounds.* Maximum pressure 9,000 p.s.i. for all columns. All particle sizes are 2.7 µm.**Not end-capped. All others end-capped.A high-purity column that exhibits excellentpeak shape for a wide range of compounds.High purity reversed phase packing thatexhibits excellent peak shape for a widerange of compounds.High purity silica substrate.The 160 Angstrom pore size was speciallychosen for the molecular weight range ofpeptides. The ligand was chosen due to itssterically protected bonding technology thatinhibits acid hydrolysis of the siloxane bonds,even under extremes of high temperatureand low pH.End-capped pentaluorophenyl with apropyl spacer.Base-deactivated for good peak shapeswhen separating basic compounds. Hexylspacer provides optimal lexibility forphenyl ring to facilitate π-π interactionswith solutes.Base-deactivated phase with a polar groupwithin the alkyl bonded phase. Providesunique selectivity and a high level of basedeactivation while reducing or eliminatingthe need for mobile phase additives.92 Chromatography: LIQUID Chromatography

BROWNLEE SPP OPTIMIZATION KITSTHE TECHNOLOGYYOU NEED TO SEPARATEFROM THE PACKBrownlee Instrument Optimizaton KitsBrownlee SPP columns can be used to enhance the performanceof virtually any PerkinElmer, Agilent, or other manufacturer’s HPLCor UHPLC system. Our SPP columns deliver resolution and speedsimilar to sub-2 μm UHPLC columns, but generate only 40% to50% of the backpressure. By combining high eficiency and lowerbackpressure, Brownlee SPP columns make it possible to get“UHPLC-like” performance from your HPLC system.PerkinElmer has created, tested and made the followingPerkinElmer and Agilent optimization kits available. OurOneSource Service Engineers are certiied on all leadingmanufacturer instruments and can help optimize yourinstrument’s performance.PerkinElmer Optimization KitsBeneits:• Generate UHPLC like separations on your standard HPLC system• Achieve ultra fast performance and eiciency on yourUHPLC system• Run samples in a fraction of the time• Experience signiicant savings through faster method development,column longevity and use of less mobile phase solventDescriptionSeries 200 LC or Flexar UHPLC systemswith UV/Vis detectorSeries 200 LC or Flexar UHPLC systemswith PDA detectorPart No.N2920191N2920193Agilent Optimization KitsDescriptionExtra column volume (ECV) - STDAutosampler and Variable WavelengthDetector (VWD) Optimization KitECV - STD Well Plate Autosampler andDiode Array Detector/Multiple WavelengthDetector (DAD/MWD)ECV - STD Autosampler and DAD/MWDECV - STD Well Plate Autosamplerand VWDUltra Low ECV - STD Autosamplerand VWDUltra Low ECV - STD Well PlateAutosampler and DAD/MWDUltra Low ECV - STD Autosampler andDAD/MWDUltra Low ECV - STD Well PlateAutosampler and VWDPart No.ZECVSTDVWDZECVSTDWPDADMWDZECVSTDDADMWDZECVSTDWPVWDZULECVSTDVWDZULECVSTDWPDADMWDZULECVSTDDADMWDZULECVSTDWPVWDwww.perkinelmer.com/supplies93

SPPperformance For Every phaseBrownlee SPP 2.7 µm ColumnsDiameter/Length Part No.C182.1 x 20 mm N93084002.1 x 30 mm N93084012.1 x 50 mm N93084022.1 x 75 mm N93084032.1 x 100 mm N93084042.1 x 150 mm N93084053.0 x 20 mm N93084063.0 x 30 mm N93084073.0 x 50 mm N93084083.0 x 75 mm N93084093.0 x 100 mm N93084103.0 x 150 mm N93084114.6 x 20 mm N93084124.6 x 30 mm N93084134.6 x 50 mm N93084144.6 x 75 mm N93084154.6 x 100 mm N93084164.6 X 150 mm N9308417peptide ES-C182.1 x 30 mm N93084502.1 x 50 mm N93084512.1 x 75 mm N93084522.1 x 100 mm N93084532.1 x 150 mm N93084543.0 x 30 mm N93084553.0 x 50 mm N93084563.0 x 75 mm N93084573.0 x 100 mm N93084583.0 x 150 mm N93084594.6 x 30 mm N93084604.6 x 50 mm N93084614.6 x 75 mm N93084624.6 x 100 mm N93084634.6 x 150 mm N9308464C82.1 x 20 mm N93084182.1 x 30 mm N93084192.1 x 50 mm N93084202.1 x 75 mm N93084212.1 x 100 mm N93084222.1 x 150 mm N93084233.0 x 30 mm N93084243.0 x 50 mm N93084253.0 x 75 mm N93084263.0 x 100 mm N93084273.0 x 150 mm N93084284.6 x 20 mm N9308429Diameter/Length Part No.4.6 x 30 mm N93084304.6 x 50 mm N93084314.6 x 75 mm N93084324.6 x 100 mm N93084334.6 x 150 mm N9308434pFp2.1 x 20 mm N93084652.1 x 30 mm N93084662.1 x 50 mm N93084672.1 x 75 mm N93084682.1 x 100 mm N93084692.1 x 150 mm N93084703.0 x 30 mm N93084713.0 x 50 mm N93084723.0 x 75 mm N93084733.0 x 100 mm N93084743.0 x 150 mm N93084754.6 x 30 mm N93084764.6 x 50 mm N93084774.6 x 75 mm N93084784.6 x 100 mm N93084794.6 x 150 mm N9308480hILIC2.1 x 30 mm N93084352.1 x 50 mm N93084362.1 x 75 mm N93084372.1 x 100 mm N93084382.1 x 150 mm N93084393.0 x 30 mm N93084403.0 x 50 mm N93084413.0 x 75 mm N93084423.0 x 100 mm N93084433.0 x 150 mm N93084444.6 x 30 mm N93084454.6 x 50 mm N93084464.6 x 75 mm N93084474.6 x 100 mm N93084484.6 x 150 mm N9308449phenyl-hexyl2.1 x 20 mm N93084812.1 x 30 mm N93084822.1 x 50 mm N93084832.1 x 75 mm N93084842.1 x 100 mm N93084852.1 x 150 mm N93084863.0 x 30 mm N93084873.0 x 50 mm N93084883.0 x 75 mm N93084893.0 x 100 mm N93084903.0 x 150 mm N93084914.6 x 30 mm N9308492Diameter/Length Part No.4.6 x 50 mm N93084934.6 x 75 mm N93084944.6 x 100 mm N93084954.6 x 150 mm N9308496rp-amide2.1 x 20 mm N93084972.1 x 30 mm N93084982.1 x 50 mm N93084992.1 x 75 mm N93085002.1 x 100 mm N93085012.1 x 150 mm N93085023.0 x 30 mm N93085033.0 x 50 mm N93085043.0 x 75 mm N93085053.0 x 100 mm N93085063.0 x 150 mm N93085074.6 x 30 mm N93085084.6 x 50 mm N93085094.6 x 75 mm N93085104.6 x 100 mm N93085114.6 x 150 mm N9308512C18 guard Column packs2.1 x 5 mm, 3 pk N93085133.0 x 5 mm, 3 pk N93085144.6 x 5 mm, 3 pk N9308515C8 guard Column packs2.1 x 5 mm, 3 pk N93085223.0 x 5 mm, 3 pk N93085234.6 x 5 mm, 3 pk N9308524hILIC guard Column packs2.1 x 5 mm, 3 pk N93085253.0 x 5 mm, 3 pk N93085264.6 x 5 mm, 3 pk N9308527peptide ES-C18 guard Column packs2.1 x 5 mm, 3 pk N93085283.0 x 5 mm, 3 pk N93085294.6 x 5 mm, 3 pk N9308530pFp guard Column packs2.1 x 5 mm, 3 pk N93085313.0 x 5 mm, 3 pk N93085324.6 x 5 mm, 3 pk N9308533phenyl-hexyl guard Column packs2.1 x 5 mm, 3 pk N93085193.0 x 5 mm, 3 pk N93085204.6 x 5 mm, 3 pk N9308521rp-amide guard Column packs2.1 x 5 mm, 3 pk N93085163.0 x 5 mm, 3 pk N93085174.6 x 5 mm, 3 pk N9308518guard Column holderN930853494 Chromatography: LIQUID Chromatography

UHPLCBrownLee UHPLC 15,000 Psi CoLUmnsBrownlee Columns for HRes Fast-LC(1.9 μm Particle Size)Recent developments in LC column technology have now madethe use of sub 3 μm particle packing materials practical. Thesesmaller particle size materials allow higher mobile phase linearvelocities to be used, without the decrease in separation eficiencyexperienced with conventional larger particle size packings. Thistranslates into higher throughput and higher productivity. Toconserve mobile phase, these sub 3 μm column materials aretypically packed into 2.1 mm i.d. columns so that low rates(mobile phase volume) are kept low. However, smaller sizedpackings result in elevated operating pressures. Technologicaladvances in pump and injector designs have also kept pace, andthese columns can be used at pressures as high as 10,000 psiwith the PerkinElmer Series 275 or up to 15,000 psi usingFX15 LC systems.Description Length Part no.Brownlee HRes Biphenyl 30 mm N9303911Brownlee HRes Biphenyl 50 mm N9303912Brownlee HRes Biphenyl 100 mm N9303913Brownlee HRes PFP Propyl 30 mm N9303914Brownlee HRes PFP Propyl 50 mm N9303915Brownlee HRes PFP Propyl 100 mm N9303916Brownlee HRes Aqueous C18 30 mm N9303917Brownlee HRes Aqueous C18 50 mm N9303918Brownlee HRes Aqueous C18 100 mm N9303919Brownlee HRes IBD 30 mm N9303920Brownlee HRes IBD 50 mm N9303921Brownlee HRes IBD 100 mm N9303922The rugged construction of this new line of small particlecolumns for high pressure application yield excellent longevityand reproducibility. These packings exhibit an exceptionally tightparticle size distribution for excellent resolving power and arepacked at elevated pressures to assure column stability even athigh pressure applications. Each column is tested to ensure thehighest level of quality and eficiency in high pressure LC testing.Features and Beneits• Sub 3 μm particle technology and 2.1 mm i.d. for higherseparation eiciency• Packed to withstand higher operating pressures• Wide choice of stationary phasesBrownlee HRes Analytical C18 30 mm N9303852Brownlee HRes Analytical C18 50 mm N9303853Brownlee HRes Analytical C18 100 mm N9303854Brownlee HRes Analytical DB Silica 30 mm N9303970Brownlee HRes Analytical DB Silica 50 mm N9303971Brownlee HRes Analytical DB Silica 100 mm N9303972Brownlee HRes Analytical DB Cyano 30 mm N9303973Brownlee HRes Analytical DB Cyano 50 mm N9303974Brownlee HRes Analytical DB Cyano 100 mm N9303975Brownlee HRes Analytical DB PAH 50 mm N9303995Brownlee HRes Analytical DB PAH 100 mm N9303996PhaseendCap?CarbonLoad Applications Chromatographic PropertiesC18 Y 11 Hydrophobic C18 Phase suitable for analyses of a wide range ofcompounds, from acidic through slightly basic.Highly base-deactivated spherical silica. Monomeric C18 bonding.AqueousC18N 6 Ideal for applications that require highly aqueous mobile phases,such as organic acids and water-soluble vitamins.Highly selective phase for polar analytes. Compatible with highly aqueous (up to100%) mobile phases.Biphenyl Y 8 Excellent choice for the analysis of steroids, tetracyclines, drugmetabolites, and other compounds that contain some degreeof unsaturation.PFPP Y 6 Exhibits excellent peak shapes for a wide range of compounds,including nucleosides, nucleotides, and halogenated compounds.IBD N - Excellent phase for signiicantly increasing the retention andselectivity of acids, for symmetrical peak shapes of bases and forthe analysis of zwitterions and other polar compounds.Highly base-deactivated spherical silica. Unique reversed phase material that displaysboth increased retention and selectivity for aromatic and/or unsaturated compoundswhen compared to conventional alkyl and phenyl phases.Highly base-deactivated spherical silica. Unique pentaluorophenyl phase with apropyl spacer.Intrinsically base-deactivated (IBD) phases, with a polar group within, or intrinsic to,the alkyl bonded phase. Provides unique selectivity and a high level of base deactivationwhile reducing or eliminating the need for mobile phase additives.Silica - - Normal phase mode of separation. Highly base-deactivated spherical silica.C8 Y 7 Superior general purpose C8 for non-basic analytes. Provides shorter retention times for hydrophobic compounds than C18.PAH Y - Maximum resolution of polycyclic aromatic hydrocarbons. Proprietary stationary phase; resloves 16 PAHs in US EPA Method 610.Cyano Y 4 Superior general purpose cyano for weakly-basic analytes. Used ineither normal or reversed phase analyses.More rugged than bare silica for normal phase analyses.Pore Size A = 140, pH Range = 2.5-8, Temp Limit = 80°C, Particle Size = 1.9 µmwww.perkinelmer.com/supplies95

Conventional ColumnsConventional columns do not require MPLC holders.Brownlee Conventional ColumnsConventional Brownlee Columns (non-cartridge) use standardcompression end ittings compatible with all HPLCinstrumentation. These columns do not require MPLC holders.Features and Beneits• End itings compatible with HPLC systems from any vendor• Use with NewGuard system (line connection) for even longercolumn life• Each column is individually tested250 mm, 100 mm Microbore Columns (1.0 mm i.d.)Brownlee Microbore HPLC ColumnsMicrobore columns (1.0 mm i.d.) are ideal for the analysis ofsamples of limited availability (e.g., micropuriication of picomolelevels of proteins/peptides). Reducing the column diameter fromthe standard 4.6 mm to 1.0 mm increases the mass sensitivity by 20times. Sample components can be collected in small elution volumes(1–50 µL) for further sequence or mass analysis. Microbore offersmajor beneits in pharmacokinetic assays and LC/MS applications.The typical low rate range is 10–100 µL/min., therefore specializedHPLC systems may be required for optimum column performance.Features and Beneits• Increase sensitivity and decrease solvent consump tion by a factor of20 (compared with 4.6 mm i.d.)• Reduce sample size for pharmacokinetic assays• Beter compatibility with LC/MS interfaces• Each column is individually testedModes of SeparationReversed-Phase Chromatography (RPC) is the most popularHPLC mode and is used in 60–80% of all appli cations. In RPC,hydrophobic groups (C18, C8, or C4) bonded to a silica supportare used together with a mobile phase of water and organicsolvent (e.g. methanol, acetonitrile).Polar Phase (Normal Phase) Chromatography (NPC) uses apolar stationary phase (unbonded silica, bonded amino or cyanogroup) together with a non- polar mobile phase (e.g., hexane).NPC is useful for functional group analysis, isomeric separations,puriication of organics, and sample cleanup.Ion-Exchange Chromatography (IEC) utilizes bonded ionicgroups to separate ionic analytes. Retention is based on theafinity of various analyte ions for the stationary phase and variousmobile phase parameters (e.g., pH, ionic strength).Brownlee AnalyticalThis is PerkinElmer’s all-purpose HPLC column line for conventionalas well as high speed LC separations. The (110 Å) silica is equivalentto the Hypersil. Columns are available in 3 or 5 µ and lengths rangingfrom 30–250 mm, in 2.1 and 4.6 i.d. The Brownlee Analytical familyincludes Amino, C18, C8, Cyano, Phenyl, Silica, and PAH phases.Brownlee Aquapore ®This is a wide-pore (300 Å, 7, and 20 µm), silica-based supportsuitable for the separation of large biopolymers.Brownlee BioThis material is wide-pore silica (300 Å) that is excellent for peptideand protein separation. Columns are available in 5 µ and lengthsranging from 30–250 mm, in 2.1 and 4.6 i.d. in C8 and C18 phases.Brownlee CHOICE This line of columns is made of (60 Å) silica which results in largesurface area, high carbon loads, and high retention compounds.Columns are available in 3 or 5 µm and lengths ranging from30–250 mm, in 2.1 and 4.6 i.d. The Brownlee Choice familyincludes the Basix, C18, Organic Acids, and PFP Propyl phases.Brownlee Spheri-5 ®This is a small-pore (80 Å, 5 µm), silica based sorbent for separatingsmall molecules. Both monofunctional (comb-pre) and polyfunctional(polymerized loop-type) C8 and C18 sorbents available.Brownlee Validated These columns are made on high-purity, Type B silica withinherent low silanophilic activity. It exhibits excellent peak shapefor a wide range of compounds while also having a wide numberof phases. The Brownlee Validated columns are the best choicefor pharmaceutical applications that deal with a lot of basic ormulti-functional compounds. Columns are available in 3 or 5 µand lengths ranging from 30–250 mm, in 2.1 and 4.6 i.d., andinclude Amino, C18, C8, Carbamate, Cyano, IBD (intrinsicallybase-deactivated), PFP (pentaluorophenyl) and phenyl phases.Guard Columns and CartridgesTo protect your column investment, we offer a complete line ofguard columns in our direct connect guard cartridges. These canbe attached to any column offered above. You can easily select thephase type to the appropriate guard column packing to ensure acorrect silica match.96 Chromatography: LIQUID Chromatography

Conventional ColumnsBrownlee ColumnsChoose only genuine PerkinElmer Brownlee columns for thebest separation results. Six different column types to meet all youranalytical needs.Features and Beneits• Each column individually tested and certiicate provided• End itings compatible with a variety of HPLC systems• Do not require MPLC holdersConventional Columns Conventional columns do not require MPLC holders.Column Functionality Pore Diameter Å % Carbon end Cap applicationsAnalytical Amino 110 2 No Excellent for carbohydrate analysisAnalytical C18 & C8 110 13 Yes Superior for non-basic analytesAnalytical Cyano 110 4 Yes General purpose for normal or reversed-phaseAnalytical Biphenyl 110 – Yes U.S. EPA Method 8330Analytical Phenyl 110 6 Yes General purpose for neutral analytesAnalytical Silica 110 – – Ideal for polar analytesAnalytical PAH 110 – Yes Maximum resolution of polynuclear aromatic hydrocarbonsAquapore ® AX-300 300 – – Used for ion exchange chromatographyAquapore Octyl C8 300 – – Used for reversed-phase chromatographyAquapore ODS C18 300 – – Silica based support used for the separation of large biopolymersBio C18 300 6 Yes High molecular weight compounds and proteinsBio C8 300 – – High molecular weight compounds and proteinsCHOICE Basix 60 12 Yes Ideal for LC/MS. Excellent for amine-containing compounds andbasic pharmaceuticalsCHOICE C18 60 27 Yes Excellent for explosives or steroidsCHOICE Biphenyl 60 23 Yes Highly retentive and selective phase for aromatic compoundsCHOICE Organic Acids 60 – No Used for challenging organic acidsCHOICE PFP Propyl 60 17 Yes Ideal for MS, ELSD, or NPD detection of nucleosides, nucleotides,purines, pyrimidines or halogenated compoundsSpheri-5 ® C8, C18, C18 ODS and Silica 80 – – Excellent for separating small molecules bothnon-functional and polyfunctionalValidated Amino 100 2 No Ideal for carbohydratesValidated C1 100 5 – Least retentive reversed-phase hydrocarbon packingValidated C4 100 9 Yes High bonding coverage and base deactivationValidated Aqueous C18 100 15 No Excellent for highly water-soluble or poorly organic-soluble compoundsValidated C18 100 20 Yes Used for the detection of anilines, barbiturates, carbonyls, fat-solublevitamins, fatty acids, glycerides, phthalatesValidated C8 100 12 Yes Less hydrophobic retention than C18Validated Carbamate 100 – – Fast analysis of carbamatesValidated Cyano 100 8 Yes Basic pharmaceuticals and steroidsValidated IBD 100 12 No Unique separation for acids, bases, zwitterions and otherpolar compoundsValidated PFP 100 7 Yes Ideal for taxors and precursors or halogenated compoundsValidated Phenyl 100 10 Yes Separation of fatty acids, polynuclear aromatic hydrocarbons,purines and pyrimidinesValidated Quat 100 – – High purity, base deactivated reversed-phase packingwww.perkinelmer.com/supplies97

Conventional ColumnsBrownlee Analytical Conventional ColumnsBrownlee Analytical AminoIdeal column for mono and disaccharide analyses. Most popularamino-based stationary phase. Routine analysis of simple sugars,using isocratic elution and a refractive index detector or anevaporative light scattering detector.pH range: 2.5 to 7.5 - Temperature limit: 80° CPore size: 110 Å - Carbon load: 2% - End Cap: NoPhase Length ID Particle Size Part No.Amino 50 mm 4.6 mm 3 µm N9303502Amino 100 mm 4.6 mm 3 µm N9303500Amino 150 mm 4.6 mm 3 µm N9303501Amino 50 mm 4.6 mm 5 µm N9303506Amino 100 mm 4.6 mm 5 µm N9303503Amino 150 mm 4.6 mm 5 µm N9303504Amino 250 mm 4.6 mm 5 µm N9303505Brownlee Analytical C8Shorter retention times for hydrophobic compounds.Reliable performance with symmetrical peak shapesfor neutral to acidic compounds.pH range: 2.5 to 7.5 - Temperature limit: 80° CPore size: 100 Å - Carbon load: 7% - End Cap: YesPhase Length ID Particle Size Part No.C8 30 mm 4.6 mm 5 µm N9303521C8 100 mm 4.6 mm 5 µm N9303515C8 150 mm 4.0 mm 5 µm N9303516C8 150 mm 4.6 mm 5 µm N9303517C8 200 mm 4.6 mm 5 µm N9303518C8 250 mm 4.0 mm 5 µm N9303519C8 250 mm 4.6 mm 5 µm N9303520Brownlee Analytical C18Suitable for a wide range of acidic to neutral hydrophobiccompounds. Excellent all purpose column.pH range: 2.5 to 7.5 - Temperature limit: 80° CPore size: 110 Å - Carbon load: 13% - End Cap: YesPhase Length ID Particle Size Part No.C18 30 mm 4.6 mm 3 µm N9303509C18 50 mm 4.6 mm 3 µm N9303510C18 100 mm 4.6 mm 3 µm N9303507C18 150 mm 4.6 mm 3 µm N9303508C18 100 mm 4.0 mm 5 µm N9303511C18 100 mm 4.6 mm 5 µm N9303512C18 150 mm 4.6 mm 5 µm N9303513C18 250 mm 4.6 mm 5 µm N9303514Brownlee Analytical CyanoSuitable for analyses of a wide range of compounds from acidicthrough slightly basic. Highly base-deactivated spherical silica.pH range: 2.5 to 7.5 - Temperature limit: 80° CPore size: 110 Å - Carbon load: 4% - End Cap: YesPhase Length ID Particle Size Part No.Cyano 150 mm 4.6 mm 5 µm N9303522Cyano 250 mm 4.6 mm 5 µm N9303523Brownlee Analytical PAHSpeciically designed for challenging analyses of polynucleararomatic hydrocarbons.pH range: 2.5 to 7.5 - Temperature limit: 80° CPore size: 110 Å - End Cap: YesPhase Length ID Particle Size Part No.PAH 100 mm 4.6 mm 5 µm N9303527PAH 150 mm 3.2 mm 5 µm N9303430PAH 150 mm 4.6 mm 5 µm N9303529PAH 200 mm 4.6 mm 5 µm N9303528PAH 250 mm 2.1 mm 5 µm N9303530PAH 250 mm 4.6 mm 5 µm N9303531Brownlee Analytical PhenylUnique selectivity especially for aromatic compounds.pH range: 2.5 to 7.5 - Temperature limit: 80° CCarbon load: 6% - Pore size: 110 Å - End Cap: YesPhase Length ID Particle Size Part No.Phenyl 150 mm 4.6 mm 5 µm N9303524Brownlee Analytical SilicaGood general purpose packing for normal phase separations.pH range: 2.5 to 7.5 - Temperature limit: 80° CPore size: 110 Å - End Cap: NoPhase Length ID Particle Size Part No.Silica 150 mm 4.6 mm 5 µm N9303525Silica 250 mm 4.6 mm 5 µm N930352698 Chromatography: LIQUID Chromatography

Conventional ColumnsBrownlee Aquapore Conventional ColumnsBrownlee Aquapore AX-300Used for Ion Exchange chromatography.Pore Size: 300 ÅPhase Length ID Particle Size Part No.AX-300 250 mm 4.6 mm 7 µm 07120040Brownlee Aquapore Octyl C8Used for Reversed Phase chromatography.Pore Size: 300 ÅPhase Length ID Particle Size Part No.C8 100 mm 1.0 mm 7 µm 07120096C8 250 mm 1.0 mm 7 µm 07120097C8 250 mm 4.6 mm 7 µm 07120033Brownlee Aquapore ODS C18Silica-based support suitable for the separation of largebiopolymers. Microbore columns increase sensitivity, reducesample size, and have better compatibility with LC/MS interfaces.Pore Size: 300 ÅPhase Length ID Particle Size Part No.C18 100 mm 1.0 mm 7 µm 07120099C18 250 mm 4.6 mm 7 µm 07120073Brownlee Bio Conventional ColumnsBrownlee Bio C8Wide-pore HPLC Column. High proportion of pore/surface areaavailable for large molecule separations.Pore Size: 300 Å - Carbon Load: 6% - End Cap: YesPhase Length ID Particle Size Part No.C8 50 mm 2.1 mm 5 µm N9303664C8 50 mm 4.6 mm 5 µm N9303665C8 100 mm 2.1 mm 5 µm N9303656C8 100 mm 4.6 mm 5 µm N9303657C8 150 mm 2.1 mm 5 µm N9303658C8 150 mm 4.6 mm 5 µm N9303659C8 200 mm 2.1 mm 5 µm N9303660C8 200 mm 4.6 mm 5 µm N9303661C8 250 mm 2.1 mm 5 µm N9303662C8 250 mm 4.6 mm 5 µm N9303663Brownlee Bio C18Excellent for separating peptides or proteins. Wide-poreHPLC Column.Pore Size: 300 Å - Carbon Load: 6% - End Cap: YesPhase Length ID Particle Size Part No.C18 50 mm 2.1 mm 5 µm N9303654C18 50 mm 4.6 mm 5 µm N9303655C18 100 mm 2.1 mm 5 µm N9303646C18 100 mm 4.6 mm 5 µm N9303647C18 150 mm 2.1 mm 5 µm N9303648C18 150 mm 4.6 mm 5 µm N9303649C18 200 mm 2.1 mm 5 µm N9303650C18 200 mm 4.6 mm 5 µm N9303651C18 250 mm 2.1 mm 5 µm N9303652C18 250 mm 4.6 mm 5 µm N9303653www.perkinelmer.com/supplies99

Conventional ColumnsBrownlee CHOICE Conventional ColumnsBrownlee CHOICE BasixExcellent choice for analytes containing aminegroup functionality.pH range: 2.5 to 7.5 - Temperature limit: 80° C -Pore Size: 60 Å - Carbon Load: 12% - End Cap: YesPhase Length ID Particle Size Part No.Basix 50 mm 2.1 mm 5 µm N9303615Basix 50 mm 4.6 mm 5 µm N9303616Basix 100 mm 2.1 mm 5 µm N9303613Basix 100 mm 4.6 mm 5 µm N9303614Basix 150 mm 2.1 mm 5 µm N9303617Basix 150 mm 4.6 mm 5 µm N9303618Basix 250 mm 4.6 mm 5 µm N9303619Brownlee CHOICE C18Excellent choice for LC/MS. Highly retentive phase forhydrophobic and slightly polar analytes.pH range: 2.5 to 7.5 - Temperature limit: 80° C -Pore Size: 60 Å - Carbon Load: 27% - End Cap: YesPhase Length ID Particle Size Part No.C18 50 mm 2.1 mm 5 µm N9303626C18 100 mm 2.1 mm 5 µm N9303625C18 150 mm 2.1 mm 5 µm N9303627C18 150 mm 4.6 mm 5 µm N9303628C18 250 mm 2.1 mm 5 µm N9303629C18 250 mm 4.6 mm 5 µm N9303630Brownlee CHOICE Organic AcidsEnhanced retention and selectivity for polar organic acids.Retention is stable and reproducible even with 100%aqueous mobile phase speciied in the AOAC method.pH range: 2.5 to 7.5 - Temperature limit: 80° C -Pore Size: 60 Å - End Cap: NoBrownlee CHOICE PropylHighly retentive for basic analytes. Excellent separation ofnucleosides, nucleotides, purines, pyrimidines halogenatedcompounds, beta blockers and tricyclic antidepressants.pH range: 2.5 to 7.5 - Temperature limit: 80° C -Pore Size: 60 Å - Carbon Load: 17% - End Cap: YesPhase Length ID Particle Size Part No.PFP Propyl 30 mm 2.1 mm 5 µm N9303640PFP Propyl 50 mm 2.1 mm 5 µm N9303641PFP Propyl 50 mm 4.6 mm 5 µm N9303642PFP Propyl 100 mm 2.1 mm 5 µm N9303638PFP Propyl 100 mm 4.6 mm 5 µm N9303639PFP Propyl 150 mm 2.1 mm 5 µm N9303643PFP Propyl 150 mm 4.6 mm 5 µm N9303644PFP Propyl 250 mm 4.6 mm 5 µm N9303645Brownlee Spheri-5 Conventional ColumnsBrownlee Spheri-5 ®Small pore silica-based sorbent for separating smallmolecules both non-functional and polyfunctionalC8 and C18 are available.Length: 250 mm - ID: 4.6 mm - Pore Size: 80 ÅPhase Length ID Particle Size Part No.C2 250 mm 4.6 mm 10 µm 07120005C8 250 mm 4.6 mm 5 µm 07120012C18 250 mm 4.6 mm 5 µm 07120016C18 250 mm 4.6 mm 10 µm 07120001C18 ODS 250 mm 4.6 mm 5 µm 07120019Silica 250 mm 4.6 mm 5 µm 07120023Phase Length ID Particle Size Part No.Organic Acids 150 mm 4.6 mm 5 µm N9303631Organic Acids 250 mm 2.1 mm 5 µm N9303632Organic Acids 250 mm 4.6 mm 5 µm N9303633Organic Acids 300 mm 4.6 mm 5 µm N9303634100 Chromatography: LIQUID Chromatography

Conventional ColumnsBrownlee Validated Conventional ColumnsBrownlee Validated AminoGood for normal phase analytes of mono- and disaccharides orsimilar compounds.pH range: 2.5 to 7.5 - Temperature limit: 80° C -Particle Size: 5 µm - Pore Size: 100 Å - Carbon Load: 2%Phase Length ID Particle Size Part No.Amino 100 mm 2.1 mm 5 µm N9303532Amino 150 mm 2.1 mm 5 µm N9303533Amino 150 mm 4.6 mm 5 µm N9303534Amino 200 mm 4.6 mm 5 µm N9303535Amino 250 mm 4.6 mm 5 µm N9303536Brownlee Validated Aqueous C18Highly base deactivated. Compatible with highly aqueousmobile phases.pH range: 2.5 to 7.5 - Temperature limit: 80° C -Pore Size: 100 Å - Carbon Load: 15% - End Cap: NoPhase Length ID Particle Size Part No.Aqueous C18 30 mm 2.1 mm 3 µm N9303540Aqueous C18 50 mm 2.1 mm 3 µm N9303541Aqueous C18 50 mm 4.6 mm 3 µm N9303542Aqueous C18 100 mm 2.1 mm 3 µm N9303537Aqueous C18 100 mm 4.6 mm 3 µm N9303538Aqueous C18 150 mm 2.1 mm 3 µm N9303539Aqueous C18 30 mm 4.6 mm 5 µm N9303550Aqueous C18 100 mm 2.1 mm 5 µm N9303543Aqueous C18 100 mm 4.6 mm 5 µm N9303544Aqueous C18 150 mm 2.1 mm 5 µm N9303545Aqueous C18 150 mm 4.6 mm 5 µm N9303546Aqueous C18 200 mm 4.6 mm 5 µm N9303547Aqueous C18 250 mm 2.1 mm 5 µm N9303548Aqueous C18 250 mm 4.6 mm 5 µm N9303549Brownlee Validated C1Least retentive reversed phase hydrocarbon packing.pH range: 2.5 to 7.5 - Temperature limit: 80° C -Pore Size: 100 Å - Carbon Load: 5% - End Cap: NoBrownlee Validated C4High bonding coverage and base deactivation. Less retention thanC18 or C8 phases.pH range: 2.5 to 7.5 - Temperature limit: 80° C -Pore Size: 100 Å - Carbon Load: 9% - End Cap: YesPhase Length ID Particle Size Part No.C4 150 mm 4.6 mm 5 µm N9303720C4 250 mm 4.6 mm 5 µm N9303721Brownlee Validated C8Retentive, high purity base-deactivated reversed phase packing.pH range: 2.5 to 7.5 - Temperature limit: 80° C -Pore Size: 80 Å - Carbon Load: 12% - End Cap: YesPhase Length ID Particle Size Part No.C8 100 mm 2.1 mm 5 µm N9303564C8 100 mm 4.6 mm 5 µm N9303565C8 150 mm 2.1 mm 5 µm N9303566C8 150 mm 4.6 mm 5 µm N9303567C8 250 mm 4.6 mm 5 µm N9303568Brownlee Validated C18Excellent general purpose phase column.Retentive high purity packing.pH range: 2.5 to 7.5 - Temperature limit: 80° C -Pore Size: 100 Å - Carbon Load: 20% - End Cap: YesPhase Length ID Particle Size Part No.C18 100 mm 2.1 mm 3 µm N9303551C18 100 mm 4.6 mm 3 µm N9303552C18 50 mm 2.1 mm 5 µm N9303562C18 50 mm 4.6 mm 5 µm N9303563C18 100 mm 2.1 mm 5 µm N9303553C18 100 mm 4.6 mm 5 µm N9303554C18 150 mm 2.1 mm 5 µm N9303556C18 150 mm 4.0 mm 5 µm N9303557C18 150 mm 4.6 mm 5 µm N9303558C18 200 mm 4.6 mm 5 µm N9303559C18 250 mm 2.1 mm 5 µm N9303560C18 250 mm 4.6 mm 5 µm N9303561Phase Length ID Particle Size Part No.C1 150 mm 4.6 mm 5 µm N9303718C1 250 mm 4.6 mm 5 µm N9303719www.perkinelmer.com/supplies101

CONVENTIONAL COLUMNSBrownlee Validated Conventional ColumnsBrownlee Validated CarbamateA unique stationary phase bonded to a 3µm silica speciicallydesigned for carbamate analysis. This column is compatiblewith luorescence or LC/MS detection. Validated Carbamatecolumn has much faster analysis, which will signiicantly reducesolvent usage.pH range: 2.5 to 7.5 - Temperature limit: 80° C - Pore Size: 100 ÅPhase Length ID Particle Size Part No.Carbamate 50 mm 4.6 mm 3 µm N9303570Carbamate 100 mm 4.6 mm 3 µm N9303569Carbamate 250 mm 4.6 mm 3 µm N9303571Brownlee Validated CyanoHigh purity Cyano phase with few silanol sites. Less sensitive tosmall amounts of water present in the mobile phase.pH range: 2.5 to 7.5 - Temperature limit: 80° C -Pore Size: 100 Å - Carbon Load: 10% - End Cap: YesPhase Length ID Particle Size Part No.Cyano 30 mm 4.6 mm 5 µm N9303578Cyano 100 mm 2.1 mm 5 µm N9303572Cyano 100 mm 4.6 mm 5 µm N9303573Cyano 150 mm 2.1 mm 5 µm N9303574Cyano 150 mm 4.6 mm 5 µm N9303575Cyano 200 mm 4.6 mm 5 µm N9303576Cyano 250 mm 4.6 mm 5 µm N9303577Brownlee Validated IBDUnique selectivity and a high level of base-deactivation. Reduces oreliminates the need for mobile phase additives.pH range: 2.5 to 7.5 - Temperature limit: 80° C -Pore Size: 100 Å - Carbon Load: 12% - End Cap: NoPhase Length ID Particle Size Part No.IBD 30 mm 4.6 mm 3 µm N9303594IBD 50 mm 2.1 mm 3 µm N9303595IBD 50 mm 4.6 mm 3 µm N9303596IBD 100 mm 2.1 mm 3 µm N9303590IBD 100 mm 4.6 mm 3 µm N9303591IBD 150 mm 2.1 mm 3 µm N9303592IBD 150 mm 4.6 mm 3 µm N9303593Brownlee Validated IBD (Continued)Phase Length ID Particle Size Part No.IBD 30 mm 1.0 mm 5 µm N9303585IBD 30 mm 2.1 mm 5 µm N9303586IBD 30 mm 4.6 mm 5 µm N9303587IBD 50 mm 2.1 mm 5 µm N9303588IBD 50 mm 4.6 mm 5 µm N9303589IBD 100 mm 2.1 mm 5 µm N9303579IBD 100 mm 4.6 mm 5 µm N9303580IBD 150 mm 2.1 mm 5 µm N9303581IBD 150 mm 4.6 mm 5 µm N9303582IBD 200 mm 4.6 mm 5 µm N9303583IBD 250 mm 4.6 mm 5 µm N9303584Brownlee Validated PFPUnique selectivity for compounds containing organohalogens orother basic functional groups.pH range: 2.5 to 7.5 - Temperature limit: 80° C -Pore Size: 100 Å - Carbon Load: 7% - End Cap: YesPhase Length ID Particle Size Part No.PFP 50 mm 2.1 mm 5 µm N9303601PFP 100 mm 4.6 mm 5 µm N9303597PFP 150 mm 2.1 mm 5 µm N9303598PFP 150 mm 4.6 mm 5 µm N9303599PFP 250 mm 4.6 mm 5 µm N9303600Brownlee Validated PhenylHigh purity, highly retentive base-deactivated phase, especiallydesigned for aromatic analytes.pH range: 2.5 to 7.5 - Temperature limit: 80° C -Pore Size: 100 Å - Carbon Load: 10% - End Cap: YesPhase Length ID Particle Size Part No.Phenyl 50 mm 1.0 mm 3 µm N9303604Phenyl 100 mm 2.1 mm 3 µm N9303602Phenyl 100 mm 4.6 mm 3 µm N9303603Phenyl 150 mm 2.1 mm 5 µm N9303605Phenyl 150 mm 4.6 mm 5 µm N9303606Phenyl 250 mm 4.6 mm 5 µm N9303607102 Chromatography: LIQUID Chromatography

CONVENTIONAL COLUMNSGuard Cartridges and AccessoriesGuard Cartridge AccessoriesDescriptionPart No.10 mm guard cartridge holder with ilter N930371310 mm guard cartridge holder without ilter N9303712High pressure ilterN9303711Peek tip standard ittingsN9303714Replacement cap frits 2.0 mm, 2.0 µmN9303717Replacement cap frits 4.0 mm, 0.5 µmN9303716Replacement cap frits 4.0 mm, 2.0 µmN9303715Guard Cartridges Brownlee AnalyticalPkg: 3Phase Length ID Particle Size Part No.Amino 10 mm 2.1 mm 5 µm N9303674Amino 10 mm 4.0 mm 5 µm N9303675C18 10 mm 2.1 mm 5 µm N9303676C18 10 mm 4.0 mm 5 µm N9303677C8 10 mm 2.1 mm 5 µm N9303678C8 10 mm 4.0 mm 5 µm N9303679Cyano 10 mm 2.1 mm 5 µm N9303680Cyano 10 mm 4.0 mm 5 µm N9303681PAH 10 mm 2.1 mm 5 µm N9303682PAH 10 mm 4.0 mm 5 µm N9303683Phenyl 10 mm 2.1 mm 5 µm N9303684Phenyl 10 mm 4.0 mm 5 µm N9303685Silica 10 mm 2.1 mm 5 µm N9303686Silica 10 mm 4.0 mm 5 µm N9303687Guard Cartridges Brownlee BioPore Size: 300 Å - Pkg: 3Phase Length ID Particle Size Part No.C18 10 mm 2.1 mm 5 µm N9303708C18 10 mm 4.0 mm 5 µm N9303707C8 10 mm 2.1 mm 5 µm N9303709C8 10 mm 4.0 mm 5 µm N9303710Guard Cartridges Brownlee CHOICEPore Size: 60 Å - Pkg: 3Phase Length ID Particle Size Part No.Basix 10 mm 2.1 mm 5 µm N9303666Basix 10 mm 4.0 mm 5 µm N9303667C18 10 mm 2.1 mm 5 µm N9303668C18 10 mm 4.0 mm 5 µm N9303669Organic Acids 10 mm 2.1 mm 5 µm N9303670Organic Acids 10 mm 4.0 mm 5 µm N9303671PFP Propyl 10 mm 2.1 mm 5 µm N9303672PFP Propyl 10 mm 4.0 mm 5 µm N9303673Guard Cartridges Brownlee ValidatedPore Size: 100 Å - Pkg: 3Phase Length ID Particle Size Part No.Amino 10 mm 2.1 mm 5 µm N9303688Amino 10 mm 4.0 mm 5 µm N9303689Aqueous C18 10 mm 2.1 mm 5 µm N9303690Aqueous C18 10 mm 4.0 mm 5 µm N9303691C1 10 mm 4.0 mm 5 µm N9303722C4 10 mm 4.0 mm 5 µm N9303723C8 10 mm 2.1 mm 5 µm N9303695C8 10 mm 4.0 mm 5 µm N9303696C18 10 mm 2.1 mm 5 µm N9303693C18 10 mm 4.0 mm 5 µm N9303694C18 10 mm 4.0 mm 10 µm N9303692Carbamate 10 mm 2.1 mm 5 µm N9303697Carbamate 10 mm 4.0 mm 5 µm N9303698Cyano 10 mm 2.1 mm 5 µm N9303699Cyano 10 mm 4.0 mm 5 µm N9303700IBD 10 mm 2.1 mm 5 µm N9303701IBD 10 mm 4.0 mm 5 µm N9303702PFP 10 mm 2.1 mm 5 µm N9303703PFP 10 mm 4.0 mm 5 µm N9303704Phenyl 10 mm 2.1 mm 5 µm N9303705Phenyl 10 mm 4.0 mm 5 µm N9303706www.perkinelmer.com/supplies103

Brownlee Cartridge ColumnsBrownlee SorbentsPerkinElmer Brownlee cartridge columns are offered in a widerange of sorbent material. Choose the right sorbent for theanalysis and mode of separation being used.Aquapore ® – is a wide-pore, silica-based support suitable for theseparation of large biopolymers.Spheri-5 ® – is a small-pore, silica-based solvent for separatingsmall molecules. Both monofunctional (comb-type) andpolyfunctional (polymerized loop-type) C8 and C18 sorbentsare available.Polypore ® – is a polymer-based (microporous, 10 µm) sorbent forthe analysis of organic acids and sugars.Validated – is a small-pore, silica-based C18 sorbent for smallmolecules, speciically for consistent pharmaceutical assays.Pecosphere – is a small-pore, silica-based sorbent for HPLCof small molecules.Reduced Activity – is a small-pore, base deactivated silica-based,reversed-phase sorbent (C18 or C8) developed for HPLC of basicanalytes and pharmaceuticals.Brownlee Cartridge ColumnsCHOICE – is a small-pore, base deactivated silica-based,reversed-phase sorbent (C18) developed for LC/MS separations.Peco HCODS – is especially suited for reversed-phase separationof proteins and peptides.Column Functionality Pore diameter Å % Carbon end Cap applicationsAquapore AX-300 (anion exchange) 300 - - Silica-based support for larger anionic compoundsAquapore OD-300 (C18) 300 10 Yes Silica-based support for larger compounds by reversed-phaseAquapore RP-300 (C8) 300 5 Yes Same as above, but for slightly more polar compoundsAquapore BU-300 (C4) 300 3 Yes Same as above, but for even somewhat more polar compoundsChoice C18 100 12 Yes For high speed/eficiency separation of basic compounds/pharmaceuticalsChoice C8 100 7 Yes For high speed/eficiency separation of basic compounds/pharmaceuticalsChoice PFPP (Pentaluorophenylpropyl) 100 5 Yes For high speed/eficiency separation of basic drugs, especially for LC/MSPecosphere C18, monofunctional 80 11 Yes Reversed-phase column for fast separation of smaller compoundsPecosphere CR C18 80 11 Yes Same as above, but for more basic compoundsPecosphere CR C8 80 11 Yes Same as above, but, also, for slightly more polar compoundsPeco HCODS C18, polyfunctional 300 9 No Especially suited for reversed-phase separation of proteins and peptidesPolypore CA (calcium form), Mixed Mode Microporous - - Especially suited for separation of organic acids, as well as sugarsPolypore H (hydrogen form), Mixed Mode Microporous - - Especially suited for separation of sugars, as well as organic acidsReduced Activity C18 80 12 Yes Reversed-phase sorbent geared for fast separation of basiccompounds/pharmaceuticalsReduced Activity C8 80 5 Yes Same as above, but for slightly more polar compoundsSpheri-5 RP-18 (monofunctional C18) 80 11 Yes Reversed-phase separation of smaller compoundsSpheri-5 ODS (polyfunctional C18) 80 14 Yes Same as above, but with somewhat different selectivitySpheri-5 RP-8 (monofunctional C8) 80 6 Yes Reversed-phase separation of more basic smaller compoundsSpheri-5 Phenyl (C5) 80 6 Yes Especially suited for hydrophobic interaction separation of biomolecules,where the activity of the compound must be preservedSpheri-5 Amino 80 3 No Normal-phase separation of smaller, relatively more polar compoundsSpheri-5 Cyano 80 4 No Same as above, but with somewhat different selectivitySpheri-5 Silica 80 - - Same as above, but with different selectivityValidated C18 100 18 Yes Reversed-phase separations in which very little variation in bothlot-to-lot and column-to-column variability can be toleratedVeloSep RP-18 (C18) 100 14 Yes Reversed-phase column for high through-put and minimal solvent usageVeloSep RP-8 (C8) 100 7 Yes Same as above, but for slightly more polar compounds104 Chromatography: LIQUID Chromatography

BROWNLEE CARTRIDGE COLUMNSBrownlee ANALYTICAL CARTRIDGE COLUMNS FORCONVENTIONAL AND NARROWBORE HPLCAnalytical cartridges from the Brownlee line are available inthree lengths (30, 100 and 220 mm) and two internal diameters(4.6 and 2.1 mm). The MPLC cartridge system allows directcoupling of a cartridge to a guard without any dead-volume.Changing cartridges is easy with the inger-tight cartridge design,which does not require any wrench tightening of the holder ordisconnecting of tubing from the LC system.Features and Beneits• Quality – manufactured under ISO-9001 certiied qualitycontrol procedures• Quick and easy cartridge change with the inger-tight design• Flexible – same reusable holder for 2.1 and 4.6 mm cartridges• Economical – less expensive than conventional columnsBrownlee CHOICE The CHOICE columns provide the speed and eficiencyappropriate for LC/MS. Each column’s separation requirementsvary depending on the system, sample and mass spectrometer.Brownlee PECOPerkinElmer pioneered the development of Fast HPLC andintroduced the popular 3 x 3 column. This column is capable ofrapid analysis, as short as one to two minutes. The 83 mm long3 x 8 column with > 10,000 plates can separate many complexmixtures in less than 10 minutes. Peco cartridges are available withMPLC ® holders. Three cartridge lengths (33, 83 and 150 mm) areavailable in 4.6 mm i.d.Brownlee PreparativePreparative columns are 10 mm i.d. cartridges, packed withAquapore ® 20 µm, 300 Å sorbents. Save time with high-pressurepreparative runs up to 3000 psi and achieve high performancewith the 20 µm, 300 Å sorbents. Typical sample capacity of the250 mm cartridge is 50 mg to 1 g of material; the typical low rateis 4–10 mL/min.Brownlee Columns and HoldersBrownlee VeloSep ®VeloSep columns are 3.2 mm i.d. cartridges packed with 3 µmreversed-phase support for high throughput analysis and reducedsolvent consumption. VeloSep is packed with 3 µm C8 or C18sorbents and available in 40 or 100 mm lengths.Brownlee ValidatedBrownlee Validated sorbent is derived from a neutral “Type B”silica with inherent low silanophobic activity. Each sorbent is testedto meet stringent speciications for the separation of basic, neutraland acidic test probes. A high-temperature bonding techniqueis coupled with an exhaustive end-capping procedure to ensuremaximum coverage of the silica surface. A proprietary treatmentstep is used to further eliminate any trace residual metals in thesilica that create active absorptive sites. This is a highly deactivatedcolumn which yields excellent peak shape for dificult baseanalytes, pharmaceuticals and small peptides.NewGuard ColumnsNewGuard cartridges are small guard cartridges (15 mm x 3.2 mmi.d.) packed with 5 or 7 µm sorbents. NewGuard columns prolongcolumn life 2 to 5 times by eliminating particulates, contaminantsand strongly bound sample components. They act as disposable,replaceable heads of your analytical columns. NewGuard columnsare easily coupled to MPLC cartridges or conventional columns.Brownlee MPLC/Peco HoldersMPLC cartridge system ensures leak-free operation up to 7,000psi, with only inger-tightening. The high-pressure seal in each endassembly actually seals tighter as pressure increases. No wrenchesare required and there is no need to disconnect any tubing to yourLC system when changing a cartridge. MPLC cartridges can bedirectly coupled to another using a union.www.perkinelmer.com/supplies105

Brownlee Cartridge Columnsextensive range of Phases and Column lengthsBrownlee MPLC Cartridge ColumnsIon Exchange106 Chromatography: LIQUID Chromatography30 mm x 4.6 mm i.d.*2 per package30 mm x 2.1 mm i.d.*2 per packageColumn description Part no. Part no. Part no.AX-300, Aquapore ® 7 µm, 300 Å, Weak Anion 07110073 07110074 07110075Polypore ® CA 10 µm, Polymeric, Calcium Form 07110091 07110093Polypore H 10 µm, Polymeric, Hydrogen Form 07110085 07110087Polar Phase30 mm x 4.6 mm i.d.*2 per package30 mm x 2.1 mm i.d.*2 per packageColumn description Part no. Part no. Part no.Cyano, Spheri-5 Cyanopropyl, 5 µm, 80 Å 07110043 07110045Silica, Spheri-5 5 µm, 80 Å 07110031 07110032 07110033Silica, Spheri-10 10 µm, 80 Å 07110145Reversed Phase30 mm x 4.6 mm i.d.*2 per package30 mm x 2.1 mm i.d.*2 per packageColumn description Part no. Part no. Part no.Cyano, Spheri-5 Cyanopropyl, 5 µm, 80 Å 07110043 07110045OD-300, Aquapore ODS C-18, 7 µm, 300 Å 07110235 07110234 07110232ODS, Spheri-5 C-18, Polyfunctional, 5 µm, 80 Å 07110019 07110020 07110021Phenyl, Spheri-5 Phenyl, 5 µm, 80 Å 07110025 07110027RP-8, Spheri-5 C-8, Monofunctional, 5 µm, 80 Å 07110001 07110002 07110003RP-18, Spheri-5 C-18, Monofunctional, 5 µm, 80 Å 07110013 07110014 07110015RP-300, Aquapore Octyl C-8 7 µm, 300 Å 07110055 07110056 07110057Pecosphere C18C-18, Monofunctional, Non-reduced, 3µm, 80A(Pack of 5)Pecosphere 3CR C-8, Base Deactivated, 3 µm (Pack of 5) 02580191Pecosphere 3CR C-18, Base Deactivated, 3 µm (Pack of 5) 02580195Pecosphere C18 100 x 3.2 mm monofunctional, non-reduced, 3 µm, 80A column 0258-0221*Requires Holder (07150013) **Requires Holder (07150014)Normal Phase100 mm x 4.6 mm i.d.**1 per package100 mm x 4.6 mm i.d.**1 per package100 mm x 4.6 mm i.d.**1 per package02580164 0258-022033 x 4.6 mm i.d.5 per package(requires holder 07150028)83 x 4.6 mm i.d.1 per package(requires holder 07150029)description Part no. Part no. Part no.Pecosphere 3 Silica 02580167Reversed Phasemonofunctional; Pore diameter 80 Å33 x 4.6 mm i.d.5 per package(requires holder 07150028)83 x 4.6 mm i.d.1 per package(requires holder 07150029)description Part no. Part no. Part no.Pecosphere 3 C18, 3 µm 02580164 02580166Pecosphere 5 C18, 5 µm 02580169Pecosphere 3CR C8, Base Deactivated, 3 µm 02580191 02580192Pecosphere 3CR C18, Base Deactivated, 3 µm 02580195 02580194Reduced Activity 5 C18, 5 µm150 x 4.6 mm i.d.1 per package(requires holder 07150030)150 x 4.6 mm i.d.1 per package(requires holder 07150030)N9303396Reduced Activity 5 C8, 5 µm 02580168Peco HCODS C18, Polyfunctional, 5 µm, 300 Å 02580213100 x 2.1 mm i.d.1 per package(requires holder 02580225)description Part no. Part no.Pecosphere 3CR C18, Base Deactivated, 3 µm (Pack of 5) 02580220 02580221100 x 3.2 mm i.d.1 per package(requires holder 02580225)

Brownlee Cartridge ColumnsScavenger ColumnsColumn description Part no.33 mm x 4.6 mm i.d. 45 per packageSilica Scavenger 10 µm 02580203C18 Scavenger Monofunctional, 10 µm, 80A 02580202Ion Exchange100 mm x 2.1 mm i.d. 21 per package220 mm x 4.6 mm i.d. 51 per packageColumn description Part no. Part no. Part no.AX-300, Aquapore 7 µm, 300 Å, Weak Anion 07110077Polypore ® CA 10 µm, Polymeric, Calcium Form 07110095Polypore H 10 µm, Polymeric, Hydrogen Form 07110089Polar Phase100 mm x 2.1 mm i.d. 21 per package220 mm x 4.6 mm i.d. 51 per packageColumn description Part no. Part no. Part no.Amino, Spheri-5 Aminopropyl, 5 µm, 80 Å 07110041Cyano, Spheri-5 Cyanopropyl, 5 µm, 80 Å 07110047Silica, Spheri-5 5 µm, 80 Å 07110035Reversed Phase100 mm x 2.1 mm i.d. 21 per package220 mm x 4.6 mm i.d. 51 per packageColumn description Part no. Part no. Part no.BU-300, Aquapore Butyl C-4 7 µm, 300 Å 07110064Cyano, Spheri-5 Cyanopropyl, 5 µm, 80 Å 07110047220 mm x 2.1 mm i.d. 51 per package220 mm x 2.1 mm i.d. 51 per package220 mm x 2.1 mm i.d. 51 per packageOD-300, Aquapore ODS C-18, 7 µm, 300 Å 07110233 07110231 07110236ODS, Spheri-5 C-18, Polyfunctional, 5 µm, 80 Å 07110022 07110023 07110024Phenyl, Spheri-5 Phenyl, 5 µm, 80 Å 07110029RP-8, Spheri-5 C-8, Monofunctional, 5 µm, 80 Å 07110004 07110005 07110006Pecosphere 3CR C-18, Base Deactivated, 3 µmRP-18, Spheri-5 C-18, Monofunctional, 5 µm, 80 Å 07110016 07110017 07110018Pecosphere 3CR C-8, Base Deactivated, 3 µmRP-300, Aquapore Octyl C-8 7 µm, 300 Å 07110058 07110059 07110060Pecosphere C18 6 C-18, Monofunctional, Nonreduced, 3 µm, 80 Å 0258-02202Requires Holder (07150014)4Requires Holder (07150028)5Requires Holder (07150015)6Requires Holder (02580225)www.perkinelmer.com/supplies107

Brownlee Cartridge ColumnsNewGuard cartridges directly coupled to a 220 mm MPLCcartridge and connected externally to a 250 mm conventional column.NewGuard ColumnsNewGuard cartridges are small guard cartridges (15 mm x3.2 mm i.d.) packed with 5 or 7 µm sorbents. NewGuardcartridges prolong column life by eliminating particulates,contaminant’s, and strongly bound sample components.They act as replaceable, disposable heads of your analyticalcolumns. There is negligible loss of eficiency and little effecton retention or resolution. NewGuards are available in aconvenient 3-pack and can be coupled directly to any MPLCcartridge with a union (07150018).Features and Beneits• Prolong column life by 2 to 5 times• Protect your column from particulates and strongly boundsample components• Optimized dimensions to prevent loss of resolution• Easy coupling to MPLC cartridges or conventional columns• Finger-tight seal to 7,000 psi using NewGuard holders• Can be used for sample preconcentration(connected to sample injection loop)15 mm cartridge*, 3.2 mm i.d., 3 per pkg.description Size Shape Part No.Amino, Aquapore ® Amino 7 µm Spherical 07110098Anion, Aquapore Anion 7 µm Spherical 07110102Cyano, Aquapore Cyano 7 µm Spherical 07110100Diol, Aquapore Diol 7 µm Spherical 07110105Phenyl, Aquapore Phenyl 7 µm Spherical 07110096RP-2, Aquapore Dimethyl 7 µm Spherical 07110086RP-4, Aquapore Butyl 7 µm Spherical 07110088RP-8, Aquapore Octyl 7 µm Spherical 07110090RP-18, Aquapore ODS 7 µm Spherical 07110092Silica, Aquapore Silica 7 µm Spherical 07110106Validated ® , C18 5 µm Spherical 00402237* Requires holder (07150001)Note: Actual bed length of NewGuard is about 13 mmView of the NewGuard holder and a NewGuard 3-pack.Standards SolutionsDescriptionTest MixLC Gradient Test MixPart No.N9334010Universal Test Mix for Reversed-phase (5 mL/pkg) 00890893StandardsHPLC SV Calibration Mix #5/610 PAH 00891542HPLC 610 Calibration Mix A 00891543HPLC 610 Calibration Mix B 00891544NewGuard AccessoriesReplacement Seals for MPLC and Prep-10 HoldersDescriptionPrep-10 Inlet SealOne each(Prep-10 Seal Replacement Kit Tools Required)Prep-10 Outlet SealOne each(Prep-10 Seal Replacement Kit Tools Required)Seals for MPLC HoldersTwo 7,000 psi seals(Seal Replacement Kit Tools Required)Seal Replacement Kit for MPLC HoldersPart No.071500120715002607150024Tools and Two 7,000 psi Seals 07150023108 Chromatography: LIQUID Chromatography

BROWNLEE CARTRIDGE COLUMNSFinger-Tight HoldersMPLC/Peco HoldersThe patented MPLC cartridge system ensures leak-free operation up to 7000 psi, with only inger-tightening. The high-pressure seal ineach end assembly actually seals tighter as pressure increases. No wrenches are required, and there is no need to disconnect any tubingto your LC system when changing a cartridge. Each MPLC cartridge can be directly coupled to another using a union.Name Description Part No.Universal Holder Kit Includes 100 and 220 mm holder bodies, 2 end assemblies, 1 union and 1 NewGuard end assembly. 07150025NewGuard® Holder Holds a single NewGuard cartridge or a single 20 mm CHOICE cartridge. 0715000130 mm Holder Holds a single MPLC and CHOICE 30 mm cartridge.(Do not use with Pecosphere column)0715001333 mm Pecosphere Holder Holds 33 mm Fast LC Peco cartridge only. 0715002850 mm Holder Holds a single 50 mm CHOICE cartridge only. N258003083 mm Peco Holder Holds 83 mm Fast LC Peco cartridge only. 07150029100 mm Holder Holds a single MPLC 100 mm cartridge. 07150014100 mm Holder Holds Pecosphere 10 cm cartridge 02580225150 mm Holder Holds a single MPLC 150 mm cartridge. 07150030220 mm Holder Holds a single MPLC 220 mm cartridge. 07150015250 mm Holder Holds a single MPLC 250 mm cartridge. 07150031100 mm NewGuard System Holder Holder for a NewGuard anda 100 mm coupled cartridge.220 mm NewGuard System Holder Holder for a NewGuard anda 220 mm coupled cartridge.0715001607150017130 mm MPLC System Holder Holder for a 30 and 100 mm coupled cartridge. 07150032UnionFor direct coupling of 2 cartridge holders.(Two holder bodies and 2 end assemblies also required.)07150018NewGuard End Assembly Upgrades a 30 mm holder to a NewGuard holder. 07150002End Assembly Holder component. 0715001930 mm Holder Body Holder component. 07150020100 mm Holder Body Holder component. 0715002120 mm Holder Body Holder component. 07150022Prep-10 Cartridge HoldersName Description Part No.100 mm Prep-10 Holder Holds a single 100 mm Prep-10 cartridge. 07150005250 mm Prep-10 Holder Holds a single 250 mm Prep-10 cartridge. 07150006www.perkinelmer.com/supplies109

Sample loopS and TubingStainless Steel Sample LoopsFor Flexar FX UHPLC Autosampler(up to 18,000 psi operation)Stainless Steel loops required for use with FX-10 or FX-15systems operating above 6,200 psi.High Pressure Stainless Steel Sample Loopsdescription Size part no.Sample Loop, SS 2 µL N2936071Sample Loop, SS 5 µL N2936056Sample Loop, SS 10 µL N2936057Sample Loop, SS 20 µL N2936058Sample Loop, SS 50 µL N2936059Sample Loop, SS 100 µL N2936060Sample Loop, SS 200 µL N2936061Sample Loop, SS 500 µL N2936062Sample Loop, SS 1 mL N2936063Sample Loop, SS 2 mL N2936064Sample Loop, SS 5 mL N2936065Stainless Steel Sample Loopsmodel 7125/7010 model 7725 model 8125Size part no. part no. part no.10 µL 09904938 N930602450 µL 09904940 N9306026100 µL 09904942 N9306027 41000013200 µL 09904818 N9306028 099048185 mL N9306032PEEK Sample Loops For Series 200/225 andFlexar LC Autosamplers (up to 6,200 psi operation)These loops are compatible with all standard Flexar autosamplersas well as Series 225 autosamplers. PEEK loops cannot be usedabove 6,200 psi operation therefore are NOT compatible eithstandard Flexar autosamplers. Stainless steel loops required for usewirh FX-10 or FX-15 UHPLC systems operating above 6,200 psi.description Size part no.PEEK Sample Loop 2 µL N2936072PEEK Sample Loop 5 µL N2936073PEEK Sample Loop 10 µL N2936074PEEK Sample Loop 20 µL N2936075PEEK Sample Loop 50 µL N2936076PEEK Sample Loop 100 µL N2936077PEEK Sample Loop 250 µL N2936078PEEK Sample Loop 500 µL N2936079PEEK Sample Loop 1 mL N2936080PEEK Sample Loop 2 mL N2936081PEEK Sample Loop 5 mL N2936082Sample loops are made from PEEK tubing and ittings. PEEK(poly-ether-ether-ketone) is a mechanically-strong, chemically-inertpolymer, ideal for HPLC applications where metal surfaces mayinteract with the mobile phase or sample component. Eachsample loop is supplied with two PEEK hex-head nuts andferrules. These ittings grip the tubing in two locations for amore reliable connection.description Size part no.PEEK Sample Loop 20 µL N9306035PEEK Sample Loop 50 µL N9306036PEEK Sample Loop 200 µL N9306038Internal Loop (PEEK and Ceramic) 2 µL N9306022Tubing AccessoriesClean-Cut tubing tool is designedto cut Telon ® , Tefzel ® and polymers ingeneral but, in particular, PEEK tubing. A unique safety lockingmechanism secures the blade when not in use.descriptionClean-Cut Tubing CutterClean-Cut Tubing Replacement BladeCable/Tubing clip (U-Shaped)Stick-on Tubing Organizer (Gray Plastic)PEEK Tubingpart no.ED020015ED020016NX598006NX598006PEEK tubing has the strength required to withstand continuoususe at HPLC pressure without swelling or bursting.Use PEEK with virtually any organic or inorganic liquid. PEEKtubing is not affected by halide salts, high-strength buffers orother aggressive mobile phases that degrade stainless steel.description length part no.1⁄16 in O.D. x 0.007 in I.D. 5 ft N93026781⁄16 in O.D. x 0.010 in I.D. 5 ft N93026501⁄16 in O.D. x 0.004 in I.D. (Black) 50 cm N29162001⁄16 in O.D. x 0.005 in I.D. (Red) 50 cm N2916059Connector Tubing, Flexar/FX Mixer toInjector, SSConnector Tubing, Flexar ISO/Binary/Quaternary Pump to Autosampler, SSStainless Steel TubingFeatures and Beneits• Pre-cut and mirror-polished in 316 stainless steelN2916211N2916210description length part no.1⁄16 in O.D. x 0.015 in I.D. 6 ft 008730361⁄16 in O.D. x 0.007 in I.D. 3 ft 025408381⁄16 in O.D. x 0.005 I.D. 2 ft 02507060110 Chromatography: LIQUID Chromatography

FINGERTIGHT FITTINGSHigh-performance Fingertight ® ittingsfor the most demanding applicationsThis PEEK Fingertight ® itting is the toughest with regard to chemicalresistance and pressure. This high-performance Fingertight ® itting isrecommended for the most demanding applications and will resistpressures up to 6,000 psi (400 bar). Made from a single piece ofPEEK, the size permits tightening without tools.ONE-PIECE,EASY-TO-USEDescriptionPEEK One-Piece Fingertight ® FittingPart No.ED020005Fittings, Nuts and FerrulesStainless steel nuts are available in both Parker-Hanniin andRheodyne formats. The nuts are used to connect 1 ⁄16 incho.d. stainless steel tubing and feature a 10-32 thread size.PerkinElmer also offers select SSI ittings for 1 ⁄16 inch o.d. tubingin 1 ⁄4-28 thread size.Stainless Steel FittingsDescriptionPart No.Kel-F Reverse Ferrule, 1 ⁄8 inch* 09903771Kel-F Ferrule, 1 ⁄16 inch* 09920382Tefzel Nut, 1 ⁄16 inch* 09920381Parker-Hanniin Ferrule, 1 ⁄16 inch 00873032Parker-Hanniin Nut, 1 ⁄16 inch 09903980Parker-Hanniin Nut & Ferrule Kit, 1 ⁄16 inchIncludes: 6 nuts and 6 ferrulesParker-Hanniin Zero-Dead-Volume Unionwith nuts and ferrulesParker-Hanniin Medium-Stem SS Nut0089094509903289N2916202Rheodyne Ferrule, 1 ⁄16 inch 09904947Rheodyne Nut, 1 ⁄16 inch long body 09904974Rheodyne Nut, 1 ⁄16 inch short body 09904956Rheodyne Nut and Ferrule Kit, 1 ⁄16 inchIncludes: 6 ferrules, 3 short nuts and 3 long nutsTefzel Nut (for Reverse Ferrule), 1 ⁄8 inch*02540274N2601189Tefzel Nut, 1 ⁄16 inch* 09920381Valco Ferrule 09903891OptiTech Reusable Nut/Ferrule for UHPLC(ingertight to 15K psi)OptiTechFerrule replacements for UHPLC (10 pack)UHPLC 1 ⁄16 inch Reusable FittingN9306301N9306300N9307800Fittings KitsRecommended for users of a PerkinElmer Biocompatible LCsystem. Contains nuts, ferrules and unions.DescriptionBiocompatible Column Fittings for LCFittings Kit for LCPart No.N9301001The kit contains Rheodyne and SSI nuts and ferrules as well asFingertight ® II nuts and ferrules for toolless installation. Zero-deadvolumeunions are also included. In addition you receive varyinglengths of stainless steel tubing in 0.007 and 0.010 inch i.d.s, aswell as 0.30 inch i.d Tefzel ® tubing.DescriptionAll-in-one Fittings KitOperation KitPart No.N9301002Recommended for purchasers of their irst LC. Includes tubing,union, ittings, syringe, basic LC book and test mix.DescriptionPart No.Operation Kit 00890873* The Tefzel and Kel-F ittings above are only for low pressure use (under 400 psi).www.perkinelmer.com/supplies111

Vacuum Degassing Kitsenhance PumP PerformanceVacuum Degassing KitsUsing a solvent degassing system will extendthe performance of your pump. PerkinElmeroffers both vacuum degassing systems thatcan handle all your degassing requirements.On-Line Vacuum Degasser KitThis is a low-volume, high eficiency, on-line module for theremoval of dissolved gasses from HPLC solvents. The vacuumdegasser is available in 3 and 5 channel models to supportisocratic, binary and quaternary pumps as well as degassing ofautosampler lush solvent.Description3-channel Vacuum Degassing Package.Includes: a Vacuum Degasser, one 1 L Bottle withCap, one 2 L Bottle with Cap, one Organizer Tray andAccessory5-channel Vacuum Degassing Package.Includes: a Vacuum Degasser, two 1 L Bottlewith Caps, two 2 L Bottles with Caps, Solvent Trayand OrganizerBinary Bottle Cap Kit.Includes: two Caps, Tubing, Fittings and Labelsrequired for two Solvent BottlesQuatenary Bottle Cap Kit.Includes: four Caps, Tubing, Fittings and Labelsrequired for four Solvent BottlesPart no.N2600571N2600570N2600522N2600523Liquid Chromatography Laboratory Bottle Kitscontents1x5 Liter Bottle with Cap and Telon Insert, 2 MetersPTFE 1 ⁄8" Tubing and 1x10 µm SS Solvent Frit1x2 Liter Bottle with Cap and Telon Insert 1 MeterPTFE 1 ⁄8" Tubing and 1x10 µm SS Solvent Frit1x1 Liter Bottle with Cap and Telon Insert 1 MeterPTFE 1 ⁄8" Tubing and 1x10 µm SS Solvent Frit1x0.5 Liter Bottle with Cap and Telon Insert 1 MeterPTFE 1 ⁄16" Tubing and 1x40 µm SS Solvent Frit1 Cap with Telon Insert 1 Meter PTFE 1 ⁄8" Tubing and1x10 µm SS Solvent Frit1 Cap with Telon Insert 1 Meter PTFE 1 ⁄16" Tubing and1x40 µm SS Solvent Frit1x0.5 Liter Bottle with Cap and Dual TelonInsert 2 pcs of 2 Meter PTFE 1 ⁄8" Tubing (PistonWash Function)1 Cap with Dual Telon Insert 2 pcs of 2 MeterPTFE 1 ⁄8" Tubing and 1x10 µm SS Solvent Frit (PistonWash Function)Part no.N2601610N2601611N2601612N2601613N2601614N2601615N2601616N2601617Check ValvesHPLC check valves allow solvent to low inonly the desired direction. Check valves areeasy to install with the torque wrench kit. For allPerkinElmer pumps an intermediate check valveis required. The input check valve, which is identical, should beordered. The check valves of the biocompatible pumps differ fromthose of the stainless steel pumps in that all portions that contactluid are composed of titanium.inlet/intermediatecheck Valveoutletcheck Valvetype Part no. Part no.Standard Stainless Steel 02540177 02540197Micropump 02540177 02540197Biocompatible Titanium N2600226 N2600192FX-15 Check Valves N2911220 N2911220Maintenance Kits and ToolsDescriptionBiocompatible Piston Seal Replacement KitIncludes: Four Seals, Backup Rings, and O-ringsPart no.N2910385Check Valve Torque Wrench 02540871Diaphragm for Pulse CompensatorFX-15 UHPLC Pump AccessoriesReplacement 0.5 µm Filter Frits for FX-15 (4-pack)High pressure FX-15 Piston Seal KitStandard Piston Seal Replacement Kitfor Series 200 and Flexar PumpIncludes: Four Seals, Backup Rings, and O-ringsInsertion ToolMicropump Piston Seal Replacement Kitfor Series 275 and FX-10 pumpPiston Wash Bottle Kit for FX-15Pulse Compensator Repair KitIncludes: Diaphragm, Elastomer Plug, and SealSeal Removal ToolSeries 200 Bio LC Pump Maintenance KitIncludes: Fuses, Seals, O-rings, and Seal ToolsSeries 200 Pump Maintenance KitIncludes: Fuses, Seals, O-rings, and Seal ToolsReplacement Vacuum Degasser BottlesDescriptionN2601316N2911224N2911221N2910383N2601503N2910384N2601616N2600313N2601295N2910346N2910345Part no.1 L Glass Bottle N26004972 L Glass Bottle N2600498112 Chromatography: LIQUID Chromatography

SOLVENT FILTRATION AND MIXERSSolvent Sparger and Solvent FiltersSolvent ilters remove unwantedparticulate matter from the LCinstrument. Spargers connectdirectly to the solvent delivery lineand are easily removed for cleaning.The scavenger column is ideal forSolvent Filterseliminating particulate material from solvents.Solvent Spargers, Filters and ScavengersDescription Size Part No.Solvent Reservoir SpargerStainless Steel 10 µm 09903610Titanium 10 µm N2600070Stainless Steel 40 µm 09903615Titanium 40 µm N2600089Solvent Filters/ScavengersIn-Line Solvent Filter System 09903606In-Line Solvent Filter Replacement Kit 02540311In-Line Solvent Filter System, TitaniumReplacement 2 µm Titanium Filter ElementReplacement Seal for In-Line Solvent FilterMixersN2600259N2601477N26012623 cm Scavenger Cartridge Holder 02580178Spheri-5 C18 10 μm Scavenger Column (5 pack) 02580202LC System AccessoriesSolvent waste cupDrain CupN2916019N291608590° Elbow Adapter, 1 ⁄4" ID HDPP 09220102Tubing Clip (U-shaped, Polypropylene)NX598006Polypro Elbow Barbs 09220102Large ID (11 mm) Silicone Tubing (5 ft)Manual Injector Bracket (Magnetic Clip-on)Static MixersN2916016N2931275Static mixers are used to facilitate complete mobile phaseblending, resulting in improved retention performance. The mixerwill most typically be used where high-pressure blending of twopump outputs is required. Mixers incorporate a highly eficientcrosslow shearing mechanism which produces vortex sheermixing over a wide low range.Mixing HeadUHPLC Static Mixers (up to 18,000 psi)Description Size Part No.In-Line High Pressure Mixer Assembly, SS 50 μL N2911200In-Line High Pressure Mixer Assembly, SS 150 μL N2911201In-Line High Pressure Mixer Assembly, SS 250 μL N2911202In-Line High Pressure Mixer Assembly, SS 350 μL N2911205In-Line High Pressure Mixer Assembly, SS 500 μL N2911203Binary T-Mixer, SS 10 μL N2911170Binary High Pressure T-Mixer, SS 50 uL N2911212HP Binary High Pressure T-Mixing, SS 150 μL N2911206Binary High Pressure T-Mixer, SS 350 uL N2911210Binary High Pressure T-Mixer, SS 500 uL N2911211T-connector, SSAnalytical Static Mixers (up to 6,200 psi)N2911127Description Size Part No.Binary T Mixer 10 µL N2911170Binary T Mixer 25 µL N2911171In-Line Mixer Assembly 150 µL N2911173In-Line Mixer Assembly 500 µL N2911172Binary T Mixer Cartridge 10 µL N2911174Binary T Mixer Cartridge 25 µL N2911175Binary T Mixer Cartridge 50 µL N2911176Binary T Mixer Cartridge 150 µL N2911177Binary T Mixer Cartridge 250 µL N2911178Dynamic MixerUsed to facilitate complete mobile phase blending, resulting inimproved retention performance. The mixer will most typically beused as part of a Micro pump package — where high-pressureblending of 2 pump outputs is required. Three different volumemixing heads (75, 200 and 400 µL) are available.Kit includes: Mixer Accessory, Stainless Steel “Tee” Fitting (N2911127), U.S.style AC Line Cord and 0.1 A Type T Fuse.DescriptionDynamic Mixer Accessory (100–240 V)Mixing HeadsSizePart No.N2910520Part No.75 µL N2910521200 µL N2910522400 µL N2910523www.perkinelmer.com/supplies113

INJECTION VALVES AND ROTOR SEALSNEWFlom Analytical Injection ValveThe Flom Analytical Injection Valve is a very reliable manual HPLCinjection valve. It comes with a built in “Inject” contact closureconnection output. A PEEK rotor seal is provided for excellentsolvent/sample resistance and the luid path is designed forminimal dispersion. This valve is available in either stainless steelor PEEK, depending on the application or need.DescriptionFlom Injection Valve Stainless SteelFlom Injection Valve PEEKInjector Valve Rotor SealsProduct No.N9306073N9306072For both Series 200 Autosampler and manual injectors.For both the Rheodyne and Flom valves, rotor seals should beperiodically replaced every 6 months to a year and are availablein PEEK. For the Rheodyne valve, they are also available in Vespel.PEEK is more inert towards amines and other basic biomolecules/pharmaceuticals, exhibiting less sample carryover. However, Vespelis somewhat more resilient than PEEK, providing somewhat betterwear life.DescriptionFlom Rotor Seal PEEKProduct No.N9306068Rheodyne 7725 Vespel Rotor Seal 09904802Rheodyne 8125 Vespel Rotor Seal 10070900Rheodyne 7725/9725 PEEK Rotor SealN9306044Rheodyne 9725 PEEKBio Injection ValveModel 9725 is inert and well-suited to the chromatography ofbiological molecules, including applications with aggressive mobilephases. This valve is useful in all applications in which metalcontact with the mobile phase and or sample should be avoided.This valve uses PEEK vent lines and a Telon ® rotor seal and can beoperated in a pH range from 0 – 14.DescriptionProduct No.9725 Injection Valve for Series 200 Autosampler N9306020Rheodyne 8125 Low-DispersionStainless Steel Injection ValveIdeal for use in an LC/MS system, the model 8125 is designed for1 and 2 mm microbore columns and can also be used withconventional analytical (3 to 5 mm) columns. Small low passagesproduce low dispersion, maintaining the high mass sensitivityinherent in micro columns.DescriptionProduct No.8125 Low-Dispersion Stainless Steel Injection Valve N9306021Rheodyne 7725 Analytical Injection ValveInject from 1 µL to 5 mL with high accuracy and precision,with the Rheodyne 7725 and 7725i valves.Rheodyne 7725 and 7725i valves are versatile injectors andcan use both partial-illing and complete-illing methods forloading the sample loop. Wide port angles of the 7725/7725ivalve provide improved access to ittings. Sample loop with a2 μL internal capacity is also available. In a clean system, the7725/7725i typically can make more than 30,000 injections beforerequiring replacement of the rotor seal.DescriptionProduct No.7725 Injection Valve for Series 200 Autosampler N93060197725i Injection Valve with Internal SwitchN9306017114 CHROMATOGRAPHY: LIQUID CHROMATOGRAPHY

Flow Cells and PumP aCCessory KitsinterChangeableFor your samPleBio Conversion KitsThere are two kits available; one that contains all of the partsnecessary to convert the Series 200 pump and Series 200autosampler for Bio applications. The other contains all ofthe parts necessary to convert only the Series 200 Pumpfor Bio applications.descriptionS200 Pump and S200 Autosampler Conversion KitS200 Pump Conversion KitPump Seal KitsdescriptionHigh Pressure Piston Seal Replacement KitIncludes: Seals (4), Backup Rings and O-RingsMicropump Piston Seal Replacement KitIncludes: Seals and O-RingsSeries 200 Pump Maintenance KitIncludes: Fuses, Seals, O-Rings and Seal ToolsDetector Backpressure RegulatorPart no.N2910035N2910036Part no.N2910383N2910384N2910345The detector backpressure regulator is a device that is attached tothe outlet of the detector to prevent outgassing in the lowcell,eliminating variations to the detector baseline.description material Part no.40 psi inline backpressure regulator N29250902 – 5K psi variablebackpressure regulatorBackpressure RegulatorAdjustable from 15 – 59 psiStainlessSteelN292509109907126Flexar UV/Vis, Series 200/785A UV/Vis,Flexar PDA and Series 200 EPThese lowcells provide the highest detection limits possible foryour sample. The 6 mm pathlength lowcell has been optimizedfor lower-dispersion LC analysis and is the perfect choice whenusing narrowbore, 2.1 mm or microbore, 1 mm columns (seeFigure 1). The 3 mm pathlength is the choice for semiprep LC toavoid detector saturation at high-solute concentrations.UV/Vis, PDA, FL and LC-135/235 FLOWCELLSdescription size Part no.Flowcells for Flexar FX-UV/Vis UHPLC DetectorsFlowcell 6 mm x 2.4 µL N2925090Flowcell Kit (includes lowcell &detector head plate w/ gasket)Flowcells for Flexar FX-UV/Vis UHPLC DetectorsFlowcell Kit (includes lowcellw/ heat exchanger and zdv unions)6 mm x 2.4 µL N292007010 mm x 15 µL N2920070Flowcell 10 mm x 15 µL N2920124Flowcell Assembly (w/ zdv unions) 6 mm x 2.4 µL 29000544Prep Flowcell Assembly(w/ zdv unions)Flowcells for 785A UV/Vis Detectors3 mm x 1.7 µL 29000545Flowcell 8 mm x 12 µL 29000542Flowcell Assembly(w/ heat exchanger and zdv unions)8 mm x 12 µL N2920117Flowcells for Flexar FX-PDA UHPLC and Series 275 PDA DetectorsFlowcell (dual-lensed) 6 mm x 2.4 µL N2920128Flowcells for Flexar and Series 200EP PDA DetectorsFlowcell 10 mm x 15 µL N2920126Flowcell Assembly 10 mm x 15 µL N2920160Flowcells for Series 200 PDA DetectorsFlowcell 10 mm x 12 µL N2922107Flowcell 4.5 mm x 5 µL N2922030FL 3 µL Flowcell w/ AssemblyFlowcells for LC-135/235 PDA DetectorsFlowcell Assembly(w/ heat exchanger)N292221110 mm x 8 µL N2350211Flowcell 10 mm x 8 µL N2350162www.perkinelmer.com/supplies115

HPLC and UHPLC deteCtor LamPsFor oUtstandingPerFormanCeSeries 200/200 EPPhoto Diode Array Detector LampPhoto Diode Array Detector LampsUV/VIS DeuteriumDetector LampOur extensive quality control and inspection process demandsthe very best quality sources. Choosing a PerkinElmer deuterium,tungsten or xenon source provides outstanding ultraviolet andtrue visible performance.• Exceptional performance anywhere in the detector’s 190 – 700 nmwavelength range• Lamp changes are quick and easy due to a unique self-aligning lampmountUV/VIS Detector LampsComponentsFlexar Series/Series 200/785A UV/VIS Detector LampsDeuterium LampTungsten LampLC-295 UV/VIS Detector LampsPart no.N2920149N2920146Deuterium Lamp 02712266Refractive Index Detector LampsThe Flexar Series/Series 200/200s Refractive Index, with itsdelection-type design, allows sensitive detection of thesecompounds with low noise and drift characteristics.series 200/200aComponentsPart no.Tungsten Lamps 02712273The Flexar Series/Series 200/200 EP Photo Diode Array Detectorprovides true UV/VIS detection and high resolution spectral data.The excellent signal-to-noise characteristics make it ideally suitedfor low-volume or low concentration samples.ComponentsFlexar/Series 200 EPDeuterium LampTungsten LampSeries 200Deuterium Lamp (Phase 2)Tungsten LampLC-135C/235Detector LampFluorescence Detector LampsPart no.N2925030N2922011N2922046N2922011N2351285The major beneit afforded by luorescence detection isthe inherent high sensitivity of the technique coupled withoutstanding speciicity. The Series 200a Fluorescence Detectorprovides signal to noise ratio of >700:1 from trace analysisusing a 150 W xenon source.ComponentsFlexar/Series 200/200aXenon LampFlexar/Series 200/200aXenon LampPart no.N2922082L2251157Festoon Lamp 04969486116 Chromatography: LIQUID Chromatography

NITROGEN GENERATORSNitrogen GeneratorsPerkinElmer offers customers a new line of nitrogengenerators to meet the growing need for costeffective and pure nitrogen.Membrane Nitrogen Generators are designed tosupply single or multiple LC/MS instruments with drynitrogen at purities of 98% to 99.5%.The generator can also be used for solventevaporation as well as supplying dry nitrogen toanalytical instruments.Features and Beneits• LC/MS grade purity enhances instrumentperformance• Phthalate-free• Recommended, certiied, tested, and used by all maj orLC/MS instrument manufacturers• Return on investment in 6 months to 2 years• Minimal maintenance requiredApplications• LC/MS• Solvent Evaporation• Analytical instruments requiring nitrogen• hermal AnalyzersLow Flow NITROFLOW LabFeatures and Beneits• Complete “Plug and Play” system recommended byall major LC/MS manufacturers• 8,000 hours compressor warranty or two years• Special design ensures quiet operation• Dual oil-less air compressorsComponentsPart No.120 V N9306213230 V N9306214Product SpecificationPurity: 94.0 – 99.5%Phthalate-freeHydrocarbon-freeFlow RatesDelivery pressure10 – 50 lpm8 barAmbient temperature 10 °C – 35 °CPower consumptionNoise level1400 Watts0.01 μm:Suspended liquids:Min./Max. operating pressure:Ambient operating temperaturerange:Inlet air temperature range:Maximum recommended inlet airtemperatureElectrical requirements:Dimensions (net):Weight (shipping):DescriptionN2-35 Mid Flow Nitrogen Generatorwithout Air CompressorProduct Specification-58 °F (-50 °C)NoneNone60/145 psig (4.0/10 barg)60 °F – 95 °F (15 °C – 35 °C)60 °F – 95 °F (15 °C – 35 °C)110 °F (43 °C)None45 cm W x 41 cm D x 130 cm H36 kg, 80 lbsPart No.N9306211Purity: 95.0 – 99.5%Atmospheric DewpointParticles >0.01 μm:Suspended liquids:Min./Max. operating pressure:Ambient operating temperaturerange:Inlet air temperature range:Maximum recommended inlet airtemperatureElectrical requirements:Dimensions (net):Weight (shipping):DescriptionN2-45 High Flow Nitrogen Generatorwithout Air CompressorProduct Specification-58 °F (-50 °C)NoneNone60/145 psig (4.0/10 barg)60 °F – 95 °F (15 °C – 35 °C)60 °F – 95 °F (15 °C – 35 °C)110 °F (43 °C)None45 cm W x 41 cm D x 130 cm H41 kg, 90 lbsPart No.N9306212Purity: 95.0 – 99.5%Hydrocarbon-freePhthalate-freeAtmospheric DewpointParticles >0.01 μm:Suspended liquids:Min./Max. operating pressure:Recommended ambientoperating temp rangeInlet air temperature range:Maximum recommended inletair temperatureInlet/Outlet portsElectrical requirements:Dimensions (net):Weight (shipping)-58 °F (-50 °C)NoneNone60/145 psig (4.0/10 barg)72 °F (22 °C)60 °F – 95 °F (15 °C – 35 °C)110 °F (43 °C)1/2” NPTNone (iltration system only)61 cm W x 50 cm D x140 cm H114 kg, 250 lbs*See www.perkinelmer.com for complete listing of low rates.Flow Rates*Inlet Output Puritypsi Ipm %100 13 99.5125 16 99.5100 20 99.0125 25 99.0100 30 98.0125 38 98.0Flow Rates*Inlet Output Puritypsi Ipm %100 20 99.5125 25 99.5100 30 99.0125 37 99.0100 46 98.0125 57 98.0Flow Rates*Inlet Output Puritypsi Ipm %100 39 99.5125 55 99.5100 53 99.0125 74 99.0100 73 98.0125 106 98.0www.perkinelmer.com/supplies117

LIQUID CHROMATOGRAPHY INDEXBottle Kits ................................................................ 87, 112Chromatography Data Systems ..................................... 83Columns .................................................................... 96-109Brownlee Analytical Conventional Columns ....................96, 98Brownlee Aquapore Conventional Columns....................96, 99Brownlee Bio Conventional Columns ..............................96, 99Brownlee CHOICE Conventional Columns ....................96, 100Brownlee Conventional Columns ..........................................97Brownlee MPLC Cartridge Columns ............................ 105-107Brownlee Spheri-5 Conventional Columns ..........................100Brownlee Validated Conventional Columns .......... 96, 101-102Guard Cartridges and Accessories ......................................103Finger-Tight Holders ...........................................................109NewGuard Accessories .......................................................108NewGuard Columns ....................................................105,108Supericially Porous Particle (SPP) ..........................................94UHPLC Columns ...................................................................95Disposable Syringes ........................................................ 87Fingertight Fittings, Nuts and Ferrules ........................ 111Flexar SQ 300 MS System and Accessories .............. 78-79Calibration Solutions ............................................................78Certiied LC Clean Easy-to-Order Convenience Kits ...............79Custom Benches ..................................................................79LCMS Caps ..........................................................................79LCMS Filtraton System ..........................................................79Sound Reducing Pump Box ...................................................79Spare Probe Assemblies/Dielectric Capillary ...........................78Spare Syringes and Needles ..................................................78Test Kits ................................................................................78Solid Phase Extraction (SPE) Columns and Kits ....... 88-91Application Packs .................................................................89Manifolds and Accessories ....................................................89Selection Kits ........................................................................89Supra-Clean and Supra-Poly SPE Columns ...................... 90-91Solvent Filtration and Mixers ....................................... 113Solvent Sparger and Solvent Filters .....................................113Static Mixers .......................................................................113SPP Optimization Kits ................................................ 92-94Agilent Optimization Kits .....................................................93PerkinElmer Optimization Kits ..............................................93Brownlee SPP HPLC/UHPLC Columns ....................................94Syringe Filters ................................................................. 87Vacuum Degassing Kits ................................................ 112Vials, Caps, and Kits ................................................... 85-86Autosampler Vial Glass Inserts ..............................................85General Starter Kit for HPLC and UHPLC ...............................85Micro Vial Kit and Polypropylene Vial/Cap Kits ......................85Vial Convenience Kits ...........................................................86Flexar HPLC/UHPLC Accessories .......................... 80-82, 84Flexar UHPLC Systems ..........................................................80Microsyringes .......................................................................81Static Mixers .........................................................................81Syringes and Kits ..................................................................81System and Pump Accessories ..............................................81Autosamplers and Upgrade Kits ...........................................82Trays and Accessories ...........................................................82LC Vials, Caps and Septa Kits ...............................................84Flow Cells ....................................................................... 115Detector Lamps - HPLC and UHPLC .............................. 116Injection Valves and Rotor Seals .................................. 114Micro-Vials ....................................................................... 87Nitrogen Generators ..................................................... 117Pump Accessory Kits ..................................................... 115Sample Loops and Tubing ............................................ 110www.perkinelmer.com243

ANALYTICAL TECHNOLOGY srl - Via San Domenico Savio, 16 - 20861 Brugherio (MB)Tel. ++39 039 87 00 26 - 87 05 12 - Fax ++39 039 28 71 442 - e-mail: antec@antec.it - www.antec.itHPLCBE2013