S-XPF VOL6-EU-EN.pdf - OSG EU

IndexTAPSTOOLSNAMETHREADTYPE RANGE PAGENEWNewSizesNEWNewSizesNewSizesMSP-XPF M 3 ~ M 16 4MS-XPF M 1 ~ M 30 5MOIL-S-XPF M 6 ~ M 45 6MS-XPF-6GX M 3 ~ M 16 7MS-XPF-7GX M 3 ~ M 16 8MS-XPF-P M 3 ~ M 20 9MS-SC-XPF M 3 ~ M 16 10MS-LT-XPF M 3 ~ M 12 11MFS-XPF M 8 ~ M 20 12MFOIL-S-XPF M 8 ~ M 20 13MFS-XPF-P M 8 ~ M 20 14UNCS-XPF N° 5 ~ 1" 15UNFS-XPF N° 6 ~ 1" 16GS-XPF-SPT G 1/8 ~ G 1/2 171. Only M6 shanks have a male center.2. The proper drill hole size may change due to work material. Use the recommended drill hole size as a benchmark.3. As the hole diameter may vary by behavior of plasticity depending on the material, hardness and shapes of workpiece, the hole diameter should be determined through trialtapping prior to final machining.4. The drill hole size is for a 6H internal thread.5. TAP Limit does not guarantee thread limit for the internal thread after tapping.DIN 371DIN 374 DIN 3761. The proper drill hole size may change due to work material. Use the recommended drill holesize as a benchmark.2. As the hole diameter may vary by behavior of plasticity depending on the material, hardnessand shapes of workpiece, the hole diameter should be determined through trial tapping priorto final machining.3. The drill hole size is for a 6H internal thread.4. TAP Limit does not guarantee thread limit for the internal thread after tapping.2