Residential - Top Notch Distributors, Inc.

170Cremone BoltsSOLID FORGED BRASS CONSTRUCTIONSpecifications:Case size: 1.75" x 6.25" (44 x 159 mm)Bolt Dimensions: Standard 7 ft. lengthTop Rod: .625" x 40.875" (16 mm x 104 mm)Bottom Rod: .625" x 38.875" (16 mm x .99 m)Standard 8 ft. lengthTop Rod: .625" x 52.875" (16 mm x 1.34)Bottom Rod: .625" x 38.875" (16 mm x .99 m)Throw: When engaged: both bolts extend .75" (19 mm)into jamb and sill.Guides: 1.5" (38 mm) wide. Decorative covers to conceal guidesare available at an additional charge. Please consult price list.Fasteners: Case is surface mounted with 4 No. 8 x 1.25" Oval PhillipsHead Screws for added strength and durability.Strikes: Furnished with 3 Strikes, one universal, one Angle,and one Mortise to meet various door conditions.Spindle: 1.375" (35 mm) in length. (No. 8105-004) A straightspindle will be substituted when trim is furnished on the exteriorside of the door.Features: Often used as an elegant and functional addition to a pair ofFrench doors with very narrow stile conditions. A typical applicationrequires active cremone bolts mounted on each leaf of a pair of doorswith no exterior access. Should an application call for a cremone boltwith a knob or lever other than our standard supplied sets (ST0,specify cremone bolt less knob (LK) or less lever (LL), and orderknob or lever minus rose (MR) of choice as a separate item.Packed: One in a box with three strikes and the appropriate fasteners.Federal Specification Equivalents: Government Type:1028A – Lever and 1028B – KnobBHMA Designation: L04171Federal specification equivalents: • Cremone Bolts are available in twosizes, one for doors up to and including 7 ft. (2.13m) and one fordoors between 7 feet and 8 feet in height, at an additional cost. A 42"centerline above the finished floor is considered standard with ourCremone Bolts. Note: Always specify hand of door as Knob/Lever trimwill turn only in one direction. See diagram on following page forhandling details.• To enable greater job site flexibility, exact sizing of Cremone Boltscan be accomplished in the field.• Note: For doors larger than 8 ft. in height, the addition of aCremone Bolt extension packet is necessary. See table.UniversalStrikeDoor SizeUp to 9 ft.Up to 10 ft.Up to 11 ft.Up to 12 ft.Above 12 ft.No. 8105For illustrationpurposesonly. Trimavailable onexterior side.AngletrikeMortiseStrikeStock parts to be orderedStandard 7 ft. Cremone Boltand 2 ft. ExtensionStandard 8 ft. Cremone Boltand 2 ft. ExtensionStandard 8 ft. Cremone Boltand 4 ft. ExtensionStandard 8 ft. Cremone Boltand 4 ft. ExtensionNot availableEast – Pennsylvania Midwest – Missouri Southwest – Texas West – NevadaCall: 800-233-4210 Fax: 800-854-4146Email: sales@topnotchinc.com Web: www.topnotchinc.com