Residential - Top Notch Distributors, Inc.

250 Lb. Pocket Door Hardware250 LB. POCKET DOOR• For Installation of pocket or bi-parting doors up to 4' wide, weighingup to 250 lbs. (113.6 kg) each and up to 8' (2.55 m) high.• Heavy-gauge, wraparound steel stiffener-reinforced split jambs.• Four large 1" (25.4 mm) ball bearing wheels for easy rolling action.• Easy-to-install feature makes installation a “snap”.• Supports panels weighing up to 250 lbs. (113.6 kg).• Easy adjustment after installation.• Cut marks on header make for easy sizing.• Non-handed steel header brackets for easy levelingof header assembly.• V-groove jump proof aluminum track.• Opening width equals door width multiplied by two,add 1 1 /4" (31.8 mm).• For Bi-Part: Sum of two doors multiplied by two, add 1 /4" (6.4 mm).• Kits are sized for 4'0" door width and can be cut shorter at installation.• For 8'0" Door: Height equals 101 1 /2" (2.55 m) from finished floor.• Kits are sized for 8'0" door height and can be cut shorterat installation.• PDFC150N conforms to ANSI A156.14 type D8671.• Cross Reference: Stanley 735/40-3925R/40-3940, CrowderCrowderframe, Hager 9630/9631, Johnson 1500, Sterling 1630.COMPLETE PACKAGED CONTRACTOR SET• Set consists of:1 ea. PDF250N-01 (Header Track),1 pr. BP250N-41 (Hanger),2 ea. PD250-71 (Guide),1 ea. PD250-77 (Bumper),1 set PDF250-51 (Jamb Studs),1 ea. BP250-99 (Wrench),2 ea. PDF250-75 (Base Plate) and2 ea. PDF150-05 (End Bracket)Units ofClass EDP No. Size MeasurePDF250N-00 40 5950 4' x 8'0" Opening Set392East – Pennsylvania800-233-4210Fax 800-854-4146Midwest – Missouri800-211-4607Fax 800-211-4608Southwest – Texas866-693-6903Fax 866-693-6904West – Nevada800-722-4210Fax 800-248-3620www.topnotchinc.comsales@topnotchinc.com