Timing Belts Catalogue

130Timing Belt clamping platesTiming Belt clamping platesAluminium clamping plates for Timing BeltsClamping plates can be used as positive attachement of the belt ends in numerous applications in linear drives. Clamping platesmust have the correct belt profile to guarantee a uniform clamping force on all the clamped belt surface and must be rigid.For standard applications a minimum of 7 teeth in clamp is recommended.For heavy applications with high performance L-steel cord, a minimum of 12 teeth in clamp is recommended.Timing Belt clamping platesType a d e L HT5 6 5,5 3,2 41,8 8AT5 6 5,5 3,2 41,8 8T10 8 9,0 5,0 80,0 15AT10 8 9,0 5,0 80,0 15T20 10 11,0 10,0 160,0 20AT20 10 11,0 10,0 160,0 20Type a d e L HXL 6 5,5 3,5 42,5 8L 8 9,0 6,0 76,6 15H 10 11,0 9,0 106,9 22Type a d e L H5M 6 5,5 3,4 41,8 88M 8 9,0 5,0 66,0 1514M 10 11,0 9,0 116,0 22Belt width b (mm)6 10 16 25 32 50 75 100C- 29 35 44 - - - -- 29 35 44 - - - -- - 41 50 57 75 100 125- - 41 50 57 75 100 125- - - 56 63 81 106 132- - - 56 63 81 106 132Belt width b (inch code)025 031 037 050 075 100 150 200C25,5 27 28,5 - - - - -- - 36,0 39 45 51,5 64 77- - - 45 51 57,5 70 83Belt width b (mm)15 20 25 30 40 50 55 85 115C34 - 44 - - - - - -40 45 - 55 - 75 - 110 -- - 56 - 71 - 86 116 146Order example:Clamping plate T5 / 16Belt widthTypeProduct groupCopyright © Ammeraal Beltech 2006