12.07.2015 Views

DT400 ARINC 429 DATABUS ANALYZER Data Sheet - Aeroflex

DT400 ARINC 429 DATABUS ANALYZER Data Sheet - Aeroflex

DT400 ARINC 429 DATABUS ANALYZER Data Sheet - Aeroflex

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Avionics<strong>DT400</strong> <strong>ARINC</strong> <strong>429</strong> <strong>DATABUS</strong> <strong>ANALYZER</strong>Sets a standard for databus test equipment in the field or shopThe <strong>DT400</strong> clearly establishes the standard fordatabus equipment. Never have so many powerfultools and features been assembled for supportingyour digital avionics.<strong>Data</strong> may be read from up to four buses and displayedin every format you might conceiveincluding graphic plots. Using the <strong>DT400</strong>'s manydiagnostic functions adopted from the mostsophisticated logic analyzer systems, it is nowmuch easier to isolate troublesome intermittentdata. A suspect LRU can be monitored for hourswith a breakpoint condition programmed tocapture and display fault information. BITE modeprovides a very effective tool for interrogatingmaintenance data from <strong>ARINC</strong> 604 avionics.Equipment menus may be read, allowing the userto select and view present fault data, and recallflight data or generate a self test. You may even usethe <strong>DT400</strong> to record fault messages for later viewingor downloading. Here are some of the <strong>DT400</strong>'spowerful features:FEATURES• Up to four receive and four transmit ports• Displays <strong>ARINC</strong> 604 BITE messages• 16-channel data recorder• RS-232C and DAC ports for downloadand conversion• Sophisticated analyzer features includingbreakpoint, history, etc.• Eight display formats including engineeringunits and graphic plots• Dynamic transmit patterns• User defined labels and transmit tablesFor the very latest specifications visitGENERAL SPECIFICATIONSRECEIVER OPERATIONPorts2 standard, expandable to 4 with additional boardBus Frequency12-14.5 kHz or 100 kHz (selectable)Input Levels±6.5 VDC to ±13.5 VDC (A to B)Input Impedance12.0 kΩWord Update1 ms to 10 sec, update rate displayed as instantaneous, min or maxvalueDisplay FormatPre-stored engineering units, full or data field hex and binary, user,ASCII, and graphic plotsMaximum Words256 per SDI per channelBus Activity MonitorMonitors loss of individual words; sensitivity selectableReal-time Download/ConversionRS-232C or 12-bit DAC portTRANSMITTER OPERATIONPortsTwo standard, expandable to four with additional boardwww.aeroflex.com


Bus Frequency12.0, 12.5, 14.5, or 100 kHz (selectable)Output Levels±10.0 VDC (A to B)Output Impedance75 ΩWord Update1 ms to 10 sec (selectable)Burst Mode01 to 99 burst output at selectable rateDisplay FormatPre-stored engineering units, full or data field hex and binary, user, andASCIIMaximum Words128 per channelTransmit Word Gap2, 3, 4, 5, 6, 8, 12 bits (selectable)Dynamic TransmitRepeat pattern of ramps and flat segments. Levels programmablebetween ± full scale and segment times or 0 to 999.999 secAddt'l Transmit OptionsRecorded data, pre-stored tablesBREAKPOINT OPERATIONLabel SequenceA, B, A or B, A then B, B then A<strong>Data</strong> ConditionsEQ, NEQ, OR, GT, LT, /GT/, /LT/Event Count1 to 99 before breakHistoryUp to 24,576 words in a programmable window about the breakpoint;optional time stampTrigger Pulse5V, 0.1 msBITE OPERATIONBITE FormatsCompatible with distributed and centralized BITE concept used on747-400, 737-300, MD-11, A320, A330, and A340 aircraftMenu DisplayStandard 14-line x 24-character format, with selectable menu choicesMaintenance WordsDisplays 350/351 label maintenance bits. Bit status along with prestoredtext presented.Recording FeatureSave up to 240 BITE screens for later viewing or downloadingDisplayHigh contrast, twisted pneumatic LCD, 240 x 128 dot graphics or 16-line x 40-character format, Front panel brightness controlPower Requirements18-36 VDC -15 Watts105-250 VAC, 47-400 Hz - 14 Watts orrechargeable internal lead-acid batteryPHYSICAL CHARACTERISTICSWeight18 lbs (8.16 kg)Width14.25" (36.2 cm)Height5.7" (14.47 cm)Depth12" (30.48 cm)RECORD OPERATIONChannelsUp to 16 labels from any combination of receive portsSample Interval1 ms to 10 sec (selectable)Record Capacity120 Kbytes (e.g., 8.5 hours of single label at 1/sec)Playback OptionsGraphic plots, data lists, DAC download, RS 232C download


ORDERING INFORMATION<strong>DT400</strong>-00-110<strong>DT400</strong>-00-220<strong>DT400</strong>-01-110<strong>DT400</strong>-01-220<strong>DT400</strong>-02-110<strong>DT400</strong>-02-220<strong>DT400</strong>-03-110<strong>DT400</strong>-03-220<strong>ARINC</strong> <strong>429</strong> <strong>Data</strong>bus Analyzer (110V)<strong>ARINC</strong> <strong>429</strong> <strong>Data</strong>bus Analyzer (220V)<strong>ARINC</strong> <strong>429</strong> <strong>Data</strong>bus Analyzer w/ IEEE-488(110V)<strong>ARINC</strong> <strong>429</strong> <strong>Data</strong>bus Analyzer w/ IEEE-488(220V)<strong>ARINC</strong> <strong>429</strong> <strong>Data</strong>bus Analyzer w/ WilliamsburgProtocol (110V)<strong>ARINC</strong> <strong>429</strong> <strong>Data</strong>bus Analyzer w/ WilliamsburgProtocol (220V)<strong>ARINC</strong> <strong>429</strong> <strong>Data</strong>bus Analyzer w/ IEEE-488 &WPC (110V)<strong>ARINC</strong> <strong>429</strong> <strong>Data</strong>bus Analyzer w/ IEEE-488 &WPC (220V)STANDARD ACCESSORIESRS-Read Software/Cable, Operations ManualOPTIONAL ACCESSORIESACPCMGR-400Software support for <strong>DT400</strong>/400HAC20629700ACRS232CBLAC20670200AC20670400AC20670600Extender board for <strong>DT400</strong>/600/650 `<strong>DT400</strong>/400H/600/650 RS-232 cable<strong>DT400</strong>/600 2-TX port expansion<strong>DT400</strong>/600 1-DAC port expansion<strong>DT400</strong>/600 IEEE-488 interface boardEXTENDED WARRANTYWDTRC/203CExtended standard warranty 36 months withscheduled calibrationWDTRC/205CExtended standard warranty 60 months withscheduled calibrationFor the very latest specifications visitwww.aeroflex.com


CHINA BeijingTel: [+86] (10) 6467 2761 2716Fax: [+86] (10) 6467 2821CHINA ShanghaiTel: [+86] (21) 6282 8001Fax: [+86] (21) 62828 8002FINLANDTel: [+358] (9) 2709 5541Fax: [+358] (9) 804 2441FRANCETel: [+33] 1 60 79 96 00Fax: [+33] 1 60 77 69 22GERMANYTel: [+49] 8131 2926-0Fax: [+49] 8131 2926-130HONG KONGTel: [+852] 2832 7988Fax: [+852] 2834 5364INDIATel: [+91] 80 5115 4501Fax: [+91] 80 5115 4502KOREATel: [+82] (2) 3424 2719Fax: [+82] (2) 3424 8620SCANDINAVIATel: [+45] 9614 0045Fax: [+45] 9614 0047SPAINTel: [+34] (91) 640 11 34Fax: [+34] (91) 640 06 40UK BurnhamTel: [+44] (0) 1628 604455Fax: [+44] (0) 1628 662017UK StevenageTel: [+44] (0) 1438 742200Fax: [+44] (0) 1438 727601Freephone: 0800 282388USA WichitaTel: [+1] (316) 522 4981Fax: [+1] (316) 522 1360Toll Free: 800 835 2352USA New CenturyTel: [+1] (913) 764 2452Fax: [+1] (913) 782 5104As we are always seeking to improve our products,the information in this document gives only a generalindication of the product capacity, performance andsuitability, none of which shall form part of any contract.We reserve the right to make design changeswithout notice. All trademarks are acknowledged.Parent company <strong>Aeroflex</strong>, Inc. ©<strong>Aeroflex</strong> 2006.www.aeroflex.cominfo-test@aeroflex.comOur passion for performance is defined by threeattributes represented by these three icons:solution-minded, performance-driven and customer-focused.Part No. 46891/250, Issue 2, 11/06

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!