Installation of egegom Microducts - Egeplast

Instruction Manual for StrippingDepending on the design it may be necessary to slit the intermediate layer open afterremoving the outer layer of sheathing. The method is the same as that used for the outerlayer of sheathing.Picture 22 Picture 23To make the cut the pipe cutter is turnedround the intermediate layer several times(Fig. 19).In doing so it is important that the knife ispositioned so that it does not damage thepipes (see Fig. 1/2).The lengthwise cut (between the two cutareas) can be made using the insulatingstripping knife Art.:108646 (Fig. 20) (inan indentation so that the pipes are notdamaged).Picture 24Picture 25It is then possible to remove the intermediatelayer.15