Magnum Catalog - Manudax

Terminal Blocks - Single RowSeries A2000 & LP2000Single Row Terminal BlocksPart Numbering SystemSeries Terminal Style Base/End Poles Screw Options Options■■ A 2■■■ L P 2 ■■ ■ ■■ ■■■■ ■■■A2 - standard barrier 01 - handwired 0 - flat base/molded 02 to 32 Blank - std. screw AB - angle mnt. options (pg 9)LP2 - low profile 02 - printed circuit mount end 02 to 30 on mount 00 - screws shipped bulk A1 to A9 - 0.250˝ QCbarrier 03 - non feed-thru 1 - flat base/mnt. end end base 03 - stainless steel B1 to B9 - 0.187˝ QC04 - wire wrap tail 2 - flat base/barrier end 04 - brass nickel-plated DR - drilled right angle (pg 9)05 - extended handwired 3 - insulator base/mnt. end 07 - steel SEMS † JA, JB & JC - barrier jumpers06 - handwired 4 - insulator base/ (not available L1 to L6 marking options (pg 22)07 - extended pin barrier end with hardware options) MP, MP8 & MT mounting plates (pg 9)08 - printed circuit 5 - closed base/ 09 - brass SEMS † OJ2 & OJ4 - over barrier jumpers (not09 - 0.250˝ QC short mount end nickel-plated available w/covers)10 - 0.187˝ QC 6 - closed base/ (not available with RC - retaining clips (pg 9)14 - printed circuit molded mount end hardware options) R30 to R77 - right angle bends (pg 9)19 - 0.250˝ QC long 9 - insulator base/ CA - captive screw SO - stand off insulators (pg 9)molded mount end WR - wire ready S1 - solder lug/flatTerminal StylesBase/End Note: 0, 6,9 styles not availablewith covers. 5 & 6Styles only availablewith 03 terminals.(not available on LP2series) Covers - (pg 23)†Contact factory for configuration.. .Inches (Millimeters)Terminal Blocks:Single & Double RowEuroMag SeriesTerminal Blocks:Base & Rail MountPower DistributionBlocks0.031(.79)0.55(14.0)01Handwired0.110(2.79)0.031(0.79)0.20(5.1)02Printed Circuit0.062(1.57)03Non Feed-Thru0.031(0.79)0.55(14.0)04Wire Wrap Tail0.062(1.57)Wire ManagementProducts0.031(0.79)0.66(16.8)0.110(2.79)05Extended Handwired0.031(0.79)0.30(7.6)06Handwired0.11(2.79)0.055(1.40)0.54(13.7)0.14(3.6)07Extended Pin0.032(0.81)0.031(0.79)0.17(4.3)08Printed Circuit0.062(1.57)Edge Connectors,One-Sided Boards0.031(0.79)0.40(10.2)090.250˝ QC short0.250(6.35)0.031(0.79)0.42(10.7)100.187˝ QC0.187(4.75)0.031(0.79) 0.125(3.2)14Printed Circuit0.062(1.57)0.33(8.4)0.31(7.9)0.031(0.79)0.72(18.3)190.250˝ QC long0.41(10.4)0.250(6.35)ComplianceReferencesFor additional product information, visit www.cooperbussmann.com/magnum7