Magnum Catalog - Manudax

Terminal Blocks - Single RowSeries CB3000Single Row Terminal Blocks ContinuedHardware Options (Bulk ordering part numbers are in parentheses.)Solder Lugs Jumpers Quick ConnectsBlade Width A = 0.250”. Blade Width B = 0.187”.0.68 (17.3)Inches (Millimeters)Terminal Blocks:Single & Double Row0.84 (21.2)S1(2S1-J)† J201Flat slip-on(J201-J)† OJ3(OJ3-J)A7 & B7(2A7-J & 2B7-J)A8 & B8(2A8-J & 2B8-J)A9 & B9(2A9-J & 2B9-J)EuroMag Series† OJ7(OJ7-J)Terminal Blocks:Base & Rail Mount†Contact factory for pole configuration.Mounting OptionsRight Angle Mounting BracketEnd PositionsusableExit Back (EB)TerminalsAngleBracketMounts blocks on PC boards at a right angle.• Protects solder joints.• Recommended for all EB (Exit Back) PCB terminal blocks.• Bracket snaps securely on block (no hardware required).• Minimum strip length (end positions are usable).• Mount with #6-32 or #8-32 screws (not supplied).Mounting Plates0.24(6.1)0.42(10.7)Snap-in Angle BracketAAOption AB0.79(20.1)1.02(25.8)Inches (Millimeters)0.71(18.0)Chassisor PCB#6 or #8mountingscrew & nut(Customersupplied.)0.45(11.4)Power DistributionBlocksWire ManagementProductsEdge Connectors,One-Sided BoardsMPMP8MOUNTINGPLATEMTMT8Options MP, MP8, MT & MT8MP Metal inserts with 0.150” dia. hole accept #6 screw.MP8 Metal inserts with 0.187” dia. hole accept #8-32 screw.MT Metal inserts with tapped hole accept #6-32 screw.MT8 Metal inserts with tapped hole accept #8-32 screw.ComplianceReferencesFor additional product information, visit www.cooperbussmann.com/magnum17