Magnum Catalog - Manudax

Terminal Blocks - Single RowTerminal Blocks:Single & Double RowEuroMag SeriesTerminal Blocks:Base & Rail MountSeries CB3000Single Row Terminal BlocksPart Numbering SystemSeries Terminal Style Base/End Poles Screws Options■■■ C B 3 ■■ ■ ■■ ■■■■ ■■■CB3 - closed back 01 - handwired #6-32 screw 1 - mount end 02 to 28 07 - steel SEMS AB - angle mounting brackets (pg 17)02 - printed circuit #6-32 screw 2 - barrier end 02 to 26 on mount (standard) A7 to A9 - 0.250” QC03 - non feed-thru #6-32 screw 5 - closed base/ end base 09 - brass SEMS B7 to B9 - 0.187” QC07 - extended pin #6-32 screw mount end nickel-plated EB - exit back terminals14 - printed circuit #6-32 screw CA - SEMS captive L1 to L6 marking options (pg 22)51 - handwired #8-32* LT1 to LT6 marking options (pg 22)52 - printed circuit #8-32* †OJ3 & OJ7 - over barrier jumpers53 - non feed-thru #8-32* MP, MP8, MT & MT8 mtg. plates (pg 17)57 - extended pin #8-32* S1 - solder lug/flat64 - printed circuit #8-32* Covers - (pg 23)Terminal Styles*Note: #8-32 screw is a specialwith #6-32 head.Base/End Note: 5 Style only availablewith 03 terminals.†Contact factory for configuration.Inches (Millimeters)Power DistributionBlocksWire ManagementProducts0.120(3.05)0.40(10.2)0.18(4.6)0.031(0.79)01Handwired #6-32 screw51#8-32 screwScrew Options0.045(1.14)0.19(4.8 )0.18(4.6)0.031(0.79)02Printed Circuit #6-32 screw52#8-32 screw03Non Feed-Thru #6-32 screw53#8-32 screwAvailable on Mount End (5) only.0.062(1.57)0.70(17.8)0.18(4.6)0.031(0.79)07Extended Pin #6-32 screw57#8-32 screw0.045(1.14)0.125(3.18)0.18(4.6)0.031(0.79)14Printed Circuit #6-32 screw64#8-32 screwEdge Connectors,One-Sided Boards07Steel SEMSZinc-Plated(standard)09Brass SEMSNickel-Plated* NOTE: Wire ready screws standard on all terminal styles.CB3 Terminal Exit OptionsInches (Millimeters)ComplianceReferences0.18(4.6)Exit Rear (std.)EBExit Back0.255(6.48)16 For additional product information, visit www.cooperbussmann.com/magnum