Foredom Catalog - Hewitt-impex.co.uk

Micromotorllammer for Stone Selting & EngravingOrder by Part Number Shown in RedStone Setting and Engraving Micromotor Kit K.l080 $ISS.0OOne Year Warrantyon 1080 MicromotorThe 1080 Micromotor is ideal for stone setting applications, including channel setting and engraving techniques requiringAccessoriesincluded in Kit '1080a hammering action. The hammer action does not engage until light pressure is applied. This feature allows the user to3-Anvil Points with Threaded Shankslocate the tool tip exactly without marring the workpiece, and prevents unexpected action until ready to work. The force p/n HP10177K $4.00 eachof the impact can be adjusted from light to full by turning the metal ring while the motor is off or running. The speed ofl-Adapter for Threaded Anvil Pointthe hammer action can also be varied from 0- 5,000 strokes per minute with the manual dial on the control box. Used p/n HPHE-32 (installed) $29.50with the Graver Holder; see below the MH-01 Handpiece becomes a precision, power engraver- no need for an air1-Adanter for Non-Threaded Shankcompressororaflexibleshaftdrive.KitlncludestheMH-01 l HammerHandpiece,HP4-917 Control,HS-214Graver Accessories p/n HPHS-35 $29.50Holder, Handpiece Tray and Accessories.1-Graver Holder with Allen Key pinMicromotor Reciprocating Handpiece IIPMH-O11fiPH8-214 $19.00$500.001-5mm Open End Wrench p/nHPHS-38 52"25Accessories Tray p/n A.AT-I $2.95Handpiece Cradle p/n HP4-933 56.00Spare Motor Brushes p/n HPL4-504$r9.506Vq" overall length, 9/'16" grip dia., I " motor dia., 13 oz1369 gr. 1 .5 amps (11 5V) .75 amps (230V)2-Pins used to tighten Anvil PointsHas a slender, contoured grip and impact adjustment ring for precise hammering work. Operates from 0-5,000 strokes 1-Anvil Point Holder used for shapingthe ooint.oer minute.tGraver Holder HPHS-214 $19.00Graver Holder H8-214 screws into the frontend of the MH-01 Handpiececonvertsit into a power engraving tool. Comes with5i64" allen key. (Graver not included.)Dual Handpiece Micromotor Kit with MH-l70 and MH-011 Handpieces K.1090 $959.00Ihe '1090 is the ultimate micromotor kit Kit 1090 Dual Handpiecefor accomplishing practically every job. lt Micromotor Kit Includes:includes the comolete contenb of theControl Box-HP4-917 $200.001070 Rotary Kit with the MH-l70 handpiece(shown opposite page), plus theRotary Handpiece -H.MH-r70 $220,00with 2.35mm (3/32") ColletMH-01 reciprocating handpiece withReciprocating Handpiece-HPMH"01 t $600all of its accessories. The control box hasVariable Soeed Foot Control-llP4-960a single receptacle on front panel for$60,00connecting one handpiece at a time.Handpiece Cradles (2)-HP4.933 $6.00ea'One Year Warranty.See Kit '1070All Accessories that come with MH-011listing for details. including the Graver Holder $106,70Spare Pair of Motor Brushes, Spare Fuse,Prices shown at right are for individualCollet Changing Wrenches $16.00components when purchased separately.\'22