UL, C-UL and TÜV Listed

DF22 SeriesThe product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)DF22 SeriesCompleteLockingFunctionCompletelyenclosedlocking systemProtection fromshorts circuitsbetween adjacentContactsFeatures1. 30 A maximum currentSingle position connector can carry current of 30 A with #10 AWGconductor. Please refer to Table #1 for current ratings for multipositionconnectors using other conductor sizes.2. Complete Locking FunctionReliable interior lock protects mated connectors from accidentaldisconnection.3. Prevention of Incorrect ConnectionsTo prevent incorrect connection when using multiple connectorshaving the same Number of contacts, 3 product types havingdifferent mating configurations are available.4. Molded-in contact retention tabsHandling of terminated contacts during the crimping is easierand avoids entangling of wires, since there are no protrudingmetal tabs.5. Prevention of incorrect board placementBuilt-in posts assure correct connector placement andorientation on the board.6. Supports encapsulationConnectors can be encapsulated up to 10 mm without affectingthe performance.7. Prevention of Short Circuits Between Adjacent ContactsEach Contact is completely surrounded by the insulator housingelectrically isolating it from adjacent contacts.8. Increased Retention Force of Crimped Contactsand confirmation of complete contact insertionSeparate contact retainers are provided for applications whereextreme pull-out forces may be applied against the wire or when avisual confirmation of the full contact insertion is required.9. Full Line of Crimp Socket ContactsRealizing the market needs for multitude of different applications,Hirose has developed several variants of crimp socket contactsand housings. Continuous development is adding differentvariations. Contact your nearest Hirose Electric representativefor latest developments.10. In-line ConnectionsConnectors can be ordered for in-line cable connections. Inaddition, assemblies can be placed next to each other allowing4 position total (2 ∞ 2) in a small space.11. Listed by UL, C-UL, and TÜV.Prevention of Incorrect ConnectionsR Type (Guide key: right side, Color: black)Standard Type (Guide key: inside, Color: natural)L Type (Guide key: left side, Color: red)*The photographs on the left show header (the boarddip side), the photographs on the right show thesocket (cable side).*The guide key position is indicated in position facingthe mating surface of the header.www.avtic.comsales@avtic.comtel.fax+31 (0)40 2088088+31 (0)40 2088099www.givatec.comsales@givatec.comtel.fax+32 2010.9 (0)16 400500+32 (0)16 40101011.

DF22 SeriesThe product information in this catalog is for reference only. Please request the Engineering Drawing for the most current an d accurate design information.DF22 Series7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)Product SpecificationsRatingsCurrentratingVoltageratingNumber of contacts12345AWG1030A25A25A22A22ASpecificationUL/C-ULTÜVAWG1225A20A20A18A18AAWG14 AWG1620A 15A18A 15A18A 15A15A 13A15A 13AAC/DC 1000VAC/DC 600VAC/DC 600VOperating temperature rangeOperating humidity rangeStorage temperature rangeStorage humidity rangeUL/C-UL/TÜVULC-ULTÜV-35ç to 85ç (Note 1)20% to 80%-10ç to 60ç (Note 2)40% to 70% (Note 2)File No. and Recognition No.: E52653: E52653: R99507031. Contact resistance2. Insulator resistance3. Withstanding voltage4. Insertion-Extraction force (per contact)5. Durability (mating/unmating)6. Vibration7. Shock8. Humidity9. Temperature cycleItem Specification Condition10. Resistance to Soldering heatContact resistance(Initial value): 5 m ohms max.1000 M ohms min.No flashover or Insulator breakdown0.3N min., 5N max.Ordering InformationContact resistance of 10 m ohms max.No electrical discontinuity of 1 µs. min.No electrical discontinuity of 1 µs. min.Contact resistance 10 m ohms max.Contact resistance of 10 m ohms max.No deformation of the insulator parts affecting performanceDF22 B L - 2 S - 7.92 C1 2 3 4 5 6 720mV max., 1mA1000 V DC2500 V AC for 1 minuteMeasured with a steel pin of 1.6 x 0.8 ± 0.002 thickness30 cyclesNumber of contacts : 1 to 5Connector typeS : SocketDS : Double-row socketP : HeaderEP : In-line plugDEP : Double-row in-line plugRS/P : RetainerContact pitch : 7.92 mmType of housingC : Crimp housingDSA : Straight headerDS : Right-angle headerNo letter : RetainerFrequency 10 to 55 Hz, single amplitude of 0.75 mm, 3 axis, duration of 2 hoursAcceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, 3 cycles in each of the 3 axis.Temperature 40ç ± 2ç, 90% to 95% RH, 96 hours(-55ç: 30 minutes 5 to 35ç: 5 minutes85ç: 30 minutes5 to 35ç: 5 minutes) for 5 cyclesNote 1: Current rating of header is 30A (1 pos.) and 25A (2 to 5 pos.)Note 2: Includes temperature rise caused by the current flow.Note 3: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidityrange covers non- conducting condition of installed connectors in storage, shipment or during transportation.Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for aspecific part number shown.MaterialsProduct Part Material FinishSocketsCrimp contactsHeadersNote : Standard Color, colors of the differing coupling forms are black for DF22R and red for DF22L.Socket, HeaderInsulatorContactsInsulatorContacts12Series name: DF22Form TypeSocketsBlank : Standard height, standard lock (Type I)B : Long type, standard lock (Type III)C : Long type, ergonomic lock (Type IV)In-line PlugsBlank : With panel stopA : Without panel stop4563 Guide key typeBlank : Inside (Color: natural)R : Right side (Color: black)L : Left side (Color: red)7PolyamideHigh conductivity copper alloyPolyamide (Glass reinforced)High conductivity copper alloyFlow solder temperature 250ç, for 10 secondsManual soldering: Soldering iron temperature 300ç, 3 secondsContactsColor: Natural whiteTin-lead platedColor: Natural beigeTin-copper plated8910(Note)(Note)DF22 A - 1416 SCF1 8 910RemarksUL94V-0----------UL94V-0----------Applicable CableBlank : UL1430A : UL1015Applicable Conductor1416 : AWG 14 to AWG 161012 : AWG 10 to AWG 12PackagingSCF : Socket contacts / ReelSC : Socket contacts / BagPCF : In-line plug contacts / ReelPC : In-line plug contacts / Bag2www.avtic.comsales@avtic.comtel.fax+31 (0)40 2088088+31 (0)40 2088099www.givatec.comsales@givatec.comtel.fax+32 (0)16 400500+32 (0)16 4010102.