Operator's Maintenance Manual - BlueMoment

TECHNICAL SPECIFICATIONSStandard Engines BD1005 BV1305 BV 1505Cylinder 3 4 4Bore (mm) 76 76 78Stroke (mm) 73.6 73.6 74.8Displacement (cc) 1001 1335 1498CombustionCoolingStarter voltage (V)Starter output (kW)Starter alternator output (Amps)Glow plug resistance (each)Engine speed (RPM)3,600 3,600 3,000Power output to ISO3046 (BHP) 28.0 35.0 37.5Declared power ISO8665 (kW) 19.2 25.7 27.1Compression RatioFuel timing BTDC3 VortexWater121.265 (standard)1ΩCapacity of standard sump approx (litres) 6 7.5 7.5Capacity of shallow sump approx (litres) 5 6.5 6.5Nett dry weight with gearbox (kg) 150 170 170FuelCoolantCoolant capacity approx (H/E litres) 5.5 Diesel fuel oil No.2D33%-50% maximum antifreeze / water7 7Min. recommended battery capacity12V 80Ah (400CCA Min)22:121°Maximum Angle of Installation: Trim 15°, Roll 30° (intermittent), 20° continuousRotation: ANTI CLOCK ON FLYWHEEL, CLOCKWISE ON OUTPUT GEARBOX FLANGE FOR USE WITH RIGHT HAND PROP IN AHEAD, on mechanical gearboxes. Hydraulic gearboxes canbe left or right handed.Diesel fuel must conform to BS2869-1970 class A1 or A2. The fuel must be a distillate and not a residual oil or blend.Lubricant: Engine - Engine oil must meet MIL-L-2104C (see section 2 for details)Gearbox - see operator’s manual for the gearbox oil type and capacityOil pressure – minimum (tickover) 0.5 barPower outputs: These comply with BS EN ISO 8665:1996 crankshaft powerNote: Declared Powers to ISO8665:19951. The declared powers are at the same engine speed as the ISO 3046 figures. This speed is the speed related to the outputs / powers shown.2. Declared powers are at the gearbox coupling (coupling to the propeller shaft) as per clause 3.2.1 with standard specifications as per our current price lists.Additional accessories or alternative gearboxes may affect the declared powers.3. Operation at parameters outside the test parameters may affect the outputs / powers which in any case are subject to the ISO tolerance bands.4