Suspension Systems Accessories

Page 1 of 10Suspension SystemsAccessories1. M7 and M9 available in color. For colors other thanFlat White and Flat Black, packaging is 240 LF per carton.2. MS154 and MS174 available in color. Packagingremains 300 LF per carton. With colors, only theexposed horizontal leg is painted the special color.Web Site www.cgcinc.comCustomer Service 800 387.7920Literature Number CSC2396AMoldings Angle Molding Angle Molding w/Gasket Shadow MoldingM12CEUse for standard ceiling perimeters. Use in clean room applications with DONN Brand Useful for creating reveals at ceiling perimeters.CE Suspension System.Also helps to hide imperfections in drywall partitionsand bulkheads.ABCDLength x A x B x C x DCatalog DescriptionPackaging/Ctn.Number LF Pcs. Wt. (lbs.)Angle Molding M7 1 12 x 7/8 x 7/8 Wall Molding 480 40 63M7A 12 x 7/8 x 7/8 Aluminum Wall Molding 480 40 26M7-10 10 x 7/8 x 7/8 Wall Molding 500 50 63M7SS 12 x 7/8 x 7/8 Stainless Steel Wall Molding 240 20 61M7Z 12 x 7/8 x 7/8 Hot-Dipped Galvanized Steel Wall Molding 480 40 58M9 1 12 x 9/16 x 15/16 Wall Molding 480 40 55M9-10 10 x 9/16 x 15/16 Wall Molding 500 50 58M12 12 x 1 x 1 1/2 Wall Molding 240 20 40MC11A25 10 x 1 x 1 Aluminum Cap Wall Molding 250 25 39M12CE 12 x 1 x 1 1/2 Wall Molding w/ Gaskets High Gloss White 240 20 40M20 10 x 1 x 2 Wall Molding 250 25 55Shadow Molding MS124 12 x 15/16 x 1/4 x 5/16 x 15/16 Shadow Molding 300 25 46MS134 12 x 9/16 x 5/16 x 1/4 x 3/4 Shadow Molding 300 25 37MS144 12 x 3/4 x 3/8 x 1/2 x 3/4 Shadow Molding 300 25 48MS154 2 12 x 7/8 x 3/4 x 3/4 x 7/8 Shadow Molding 300 25 67MS164 12 x 3/4 x 3/4 x 3/4 x 3/4 Shadow Molding 300 25 62MS174 2 12 x 1 x 3/8 x 3/8 x 9/16 Shadow Molding 300 25 43CGC Inc.350 Burnhamthorpe Rd. W., 5th Fl.Mississauga, ON L5B 3J1For trademark information refer toCSC2102.152CSC2396A 4-2002© 2002, CGC Inc.Printed in Canada

Page 2 of 10Suspension SystemsAccessoriesWeb Site www.cgcinc.comCustomer Service 800 387.7920Literature Number CSC2396AMoldings US Channel Wall Molding US Channel Wall Molding w/Gasket “F” MoldingUS25CEUse with C-8 clip to hold down perimeter Use with C-8 clip in clean room application with Use “F” Molding to create ceiling “breaks,” soffits;ceiling tiles. DONN ® Brand CE Suspension System. changes in elevation.BACLength x A x B x CCatalog DescriptionPackaging/Ctn.Number LF Pcs. Wt. (lbs.)US Channel US8 10 x 1/2 x 1/2 x 1 U Molding 300 30 20Wall MoldingUS10 10 x 5/8 x 1/2 x 1 U Molding 300 30 21US12 10 x 3/4 x 1/2 x 1 U Molding 500 50 44US16 10 x 1 x 1/2 x 1 U Molding 500 50 48US19 10 x 1-3/16 x 1/2 x 1 U Molding 300 30 56US20 10 x 1-1/4 x 1/2 x 1 U Molding 300 30 57US22 10 x 1-3/8 x 1/2 x 1 U Molding 300 30 60US25 10 x 1-9/16 x 1/2 x 1 U Molding 168 14 37US31 10 1-15/16 x 1/2 x 1 U Molding 300 30 70UA25 12 x 1-9/16 x 1/2 x 1 Aluminum U Wall Molding 100 10 11US25CE 10 x 1-9/16 x 1/2 x 1 U Molding w/ Gaskets High Gloss White 300 30 63“F” Molding MF8 10 x 1/2 F Molding (For 1/2 panels) 100 10 28MF10 10 x 5/8 F Molding (For 5/8 panels) 100 10 29CGC Inc.350 Burnhamthorpe Rd. W., 5th Fl.Mississauga, ON L5B 3J1For trademark information refer toCSC2102.153CSC2396A 4-2002© 2002, CGC Inc.Printed in Canada

Page 3 of 10Suspension SystemsAccessoriesWeb Site www.cgcinc.comCustomer Service 800 387.7920Literature Number CSC2396AMolding Square Molding Corner Clip Outside Corner Radius Molding Corner ClipAccessories JS JS174 JH, JBUse with angle molding. Use with MS174 Shadow Molding. Use for radius or “bullnose” corners.Inside Corner Angle MoldA2Use with angle molding.Prefabricated Inside CornerA174Use with MS174 Shadow Molding.Catalog DescriptionPackaging/Ctn.Number Pcs. Wt. (lbs.)Outside Corners JS9 Square 90° Outside Corner Cap for 9/16 Molding 100 3JS14 Square 90° Outside Corner Cap for 7/8 Molding 100 3JS16 Square 90° Outside Corner Cap for 1 Molding 100 3JS174 Square 90° Outside Corner Cap for MS174 Shadow Molding 50 1.5JH9 1 Radius 90° Outside Corner Cap for 9/16 Molding 100 3JH12 1 Radius 90° Outside Corner Cap for 3/4 Molding 100 3JH14 1 Radius 90° Outside Corner Cap for 7/8 Molding 100 3JH15 1 Radius 90° Outside Corner Cap for 15/16 Molding 100 3JH16 1 Radius 90° Outside Corner Cap for 1 Molding 100 3JB14 3/4 Radius 90° Outside Corner Cap for 7/8 Molding 100 3JB16 3/4 Radius 90° Outside Corner Cap for 1 Molding 100 3Inside Corners A2 Inside Corner Cap for 7/8 Molding 200 4A174 Inside Corner Cap for MS174 Shadow Molding 50 1.5CGC Inc.350 Burnhamthorpe Rd. W., 5th Fl.Mississauga, ON L5B 3J1For trademark information refer toCSC2102.154CSC2396A 4-2002© 2002, CGC Inc.Printed in Canada

Page 4 of 10Suspension SystemsAccessoriesNotesFor special lengths, contact your Customer RelationsRepresentative. Hanger wire complies with FederalSpecification QA-W-461H.Web Site www.cgcinc.comCustomer Service 800 387.7920Literature Number CSC2396AGrid Installation Galvanized Hanger Wire Drywall Grid Hanger Clip Grid Load Transfer BracketAccessories A B CUse to suspend acoustical ceilings. Also use for Use to suspend secondary ceiling. Use to suspend secondary ceilingflat and curved USG Drywall Suspension System.Furring Clip for Grid to ChannelDUse to connect grid to 1-1/2 channel.Attachment Clip for DX to Wall AngleEUsed to attach grid at perimeter to avoid the useof pop rivets.Catalog DescriptionPackaging/Ctn. DetailNumber Pcs. Wt. (lbs.) KeyGalvanized 907230 12-Gauge Wrapped 12 ft.; 50 lb. bundle 50 AHanger Wire900225 12-Gauge Wrapped 48; 12 lb. bundle 12 AConsult CustomerService for available DGHC Drywall Grid Hanger Clip 100 1.5 Blengths in your area.Grid to 256860 Grid Load Transfer Bracket, 15/16 grid 250 13 CPrimary Support256861 Grid Load Transfer Bracket, 9/16 grid 250 13 C256862 Grid Load Transfer Bracket, 1-1/2 grid 250 13 CV-14 Furring Clip for Grid to Channel 500 45 DGrid to Molding AC-M7 Attachment Clip for DX to Wall Angle 100 7 ECGC Inc.350 Burnhamthorpe Rd. W., 5th Fl.Mississauga, ON L5B 3J1For trademark information refer toCSC2102.155CSC2396A 4-2002© 2002, CGC Inc.Printed in Canada

Page 6 of 10Suspension SystemsAccessoriesWeb Site www.cgcinc.comCustomer Service 800 387.7920Literature Number CSC2396AGrid Installation Tee Face Sleeve Tee Face Cover Accessory Hanger HookAccessories L M NUse to cut in tees to existing system. Use to cut in tees and to cover damage from Remove top clip for use with standard 1/4partition attachment.FINELINE Suspension System.Partition Attachment ClipO1Use for square-edge panels.Partition Attachment ClipO2Use with reveal-edge panels.Catalog DescriptionPackaging/Ctn.DetailNumber LF Pcs. Wt. (lbs.) KeyTee Accessories TFS-1 Tee Face Sleeve (3 long) x 15/16 250 10 L, MTFC-1 Tee Face Cover (2 long) x 15/16 100 1 L, MAH1 Accessory Hanger Hook (white injection molded) 50 1 NPartition PAC15-SQ Partition Clip for 15/16 or 9/16 SQ panels (245339) 100 8 O1, O2AttachmentPAC15-SL Partition Clip for 15/16 SL panels (254340) 100 8 O2PAC 9-FL Partition Clip for 9/16 FL panels (254341) 100 8 O2CGC Inc.350 Burnhamthorpe Rd. W., 5th Fl.Mississauga, ON L5B 3J1For trademark information refer toCSC2102.157CSC2396A 4-2002© 2002, CGC Inc.Printed in Canada

Page 7 of 10Suspension SystemsAccessoriesWeb Site www.cgcinc.comCustomer Service 800 387.7920Literature Number CSC2396AGrid Installation Hold Down Clip—Fire-Rated Grid Hold Down Clip Accessible Hold Down ClipAccessories P1 P2 QUsed when required in some fire-rated assemblies. Use to maintain a clean room seal with DONN Brand Use as a hold down clip for 5/8 panels. ProvidesCE Suspension System.ready accessibility.Variable Hold Down Clip Panel Retention Clip 20428 Wall Spring ClipR S TUse for 5/16 to 3/4 panels. Use with 1-1/2 high cross tees (i.e., DX422 Use to hold down perimeter ceiling panels. Useful forand DX424). Use one per ROCK FACE ® ceiling panel. maintaining clean room seal with US25CE molding.Catalog DescriptionPackaging/Ctn.DetailNumber LF Pcs. Wt. (lbs.) KeyHold Down Clips L15 Hold Down Clip—for 5/8 fire-rated panels 1000 7 P1L15CE Hold Down Clip—for panels in clean room applications 500 3.5 P2L45 Accessible Hold Down Clip for 5/8 panels 1000 15 QV15 Variable Hold Down Clip 1000 8 R730600 Panel Retention Clip (20428) 200 15 SC-8 Wall Spring Clip 2000 29 TC-8CE Wall Spring Clip 500 8 TA9 Hold Down Clip—for 5/8 panels 500 5CGC Inc.350 Burnhamthorpe Rd. W., 5th Fl.Mississauga, ON L5B 3J1For trademark information refer toCSC2102.158CSC2396A 4-2002© 2002, CGC Inc.Printed in Canada

Page 8 of 10Suspension SystemsAccessoriesWeb Site www.cgcinc.comCustomer Service 800 387.7920Literature Number CSC2396AGrid Installation Miter Closure Clip for FINELINE Molding Attachment Clip for FINELINE Partition Attachment Clip for FINELINEAccessories V W XUse for closing off unused miters. Use to attach FINELINE tees to angle molding Use to screw-attach ceiling high partitions.and shadow molding.T-BoltYUse to bolt-attach partitions, signage, orpendant-mounted indirect lighting.FINELINE Cut Off DieZUse to field cut FINELINE Tees.Catalog DescriptionPackaging/Ctn. DetailNumber Pcs. Wt. (lbs.) KeyFINELINE MCC3 2 Miter Closure Clip for 1/8 FINELINE Suspension System 50 1 VAccessoriesMCC2 2 Miter Closure Clip for standard FINELINE Suspension System 50 1 VMAC2 Molding Attachment Clip for FINELINE Suspension System 100 3 WPAC1 3 Partition Attachment Clip 50 1 XTB1 1 x 1/4 - 20 T-Bolt 100 1 YFC1 FINELINE Suspension System Cut Off Die (scaffold mount) 1 10 ZCGC Inc.350 Burnhamthorpe Rd. W., 5th Fl.Mississauga, ON L5B 3J1For trademark information refer toCSC2102.159CSC2396A 4-2002© 2002, CGC Inc.Printed in Canada

Page 9 of 10Suspension SystemsAccessoriesNotesAn assembly consists of 1 plenum and 1 frame, oneassembly per carton.Frame color is Flat White. For moreinformation on color finishes contact your CustomerRelations Representative.Web Site www.cgcinc.comCustomer Service 800 387.7920Literature Number CSC2396ALight Fixture Light Fixture Clip Vinyl Light FrameAccessories 1 2For CENTRICITEE Suspension System; use black Use to add light fixture support to FINELINE andclips with parabolic fixtures. Cross tee must be CENTRICITEE suspension systems.connected to main tee.Catalog DescriptionPackaging/Ctn. DetailNumber Pcs. Wt. (lbs.) KeyLight Fixture Clip LFC Light Fixture Clip (Specify Flat White or Flat Black) 100 2 1Light Frames LF14 1 x 4 Vinyl Light Frame (Flat White Only), FINELINE Suspension System 25 8 2Recommended withLF22 2 x 2 Vinyl Light Frame (Flat White Only), FINELINE Suspension System 25 7 2NEMA “G” fixtures.LF24 2 x 4 Vinyl Light Frame (Flat White Only), FINELINE Suspension System 25 10 2LF3030 30 x 30 Vinyl Light Frame (Flat White Only), FINELINE Suspension System 25 9 2MLF14 1 x 4 Vinyl Light Frame (Flat White Only), CENTRICITEE Suspension System 25 8 2MLF22 2 x 2 Vinyl Light Frame (Flat White Only), CENTRICITEE Suspension System 25 7 2MLF24 2 x 4 Vinyl Light Frame (Flat White Only), CENTRICITEE Suspension System 25 10 2MLF3030 30 x 30 Vinyl Light Frame (Flat White Only), CENTRICITEE Suspension System 25 9 2CGC Inc.350 Burnhamthorpe Rd. W., 5th Fl.Mississauga, ON L5B 3J1For trademark information refer toCSC2102.160CSC2396A 4-2002© 2002, CGC Inc.Printed in Canada

Page 10 of 10Suspension SystemsAccessoriesNotes* One carton contains six 12 oz. cans.Paints will not be shipped air freight.** Specify color number from price list.Web Site www.cgcinc.comCustomer Service 800 387.7920Literature Number CSC2396AMiscellaneous Universal Field Cross Tee Hole Punch Hand-Held Field Punch Air DiffuserAccessoriesFor all DONN Brand Suspension Systems. For all DONN Brand Suspension Systems. Field cut foil-backed ceiling tile to fit diffuser face.Use with FINELINE and CENTRICITEE suspension systems.Catalog DescriptionPackaging/Ctn.Number Pcs. Wt. (lbs.)Cross Tee 215738 Universal Field Cross Tee Hole Punch 1 70Hole Punches276063 Hand-Held Universal Cross Tee Hole Punch 1 10204755 Replacement Die Block for Field Die 1 1276759 Replacement Hand Held Die Block for Field Die 1 1214418 Replacement Punch for Field Die 1 1276760 Replacement Hand Held Punch for Field Die 1 1Touch-Up Paint B12 Flat Black Spray Paint (205)* 6 7B13 Flat White Spray Paint (050)* 6 7PC15 GAL Standard Gallon** 1 12PC16 QT Standard Quart** 1 3PC19 GAL Custom Gallon 1 12PC20 QT Custom Quart 1 3Air Diffusers AD16 2 x 2 1 Slot with 6 Collar 1 7Recommended forAD18 2 x 2 1 Slot with 8 Collar 1 7use with 9/16systems.AD26 2 x 2 2 Slot with 6 Collar 1 8AD28 2 x 2 2 Slot with 8 Collar 1 8AD38 2 x 2 3 Slot with 8 Collar 1 8AD310 2 x 2 3 Slot with 10 Collar 1 9AD410 2 x 2 4 Slot with 10 Collar 1 10AD412 2 x 2 4 Slot with 12 Collar 1 10CGC Inc.350 Burnhamthorpe Rd. W., 5th Fl.Mississauga, ON L5B 3J1For trademark information refer toCSC2102.161CSC2396A 4-2002© 2002, CGC Inc.Printed in Canada